Tender For Resurfacing Of Roads And Renewal And Replacement Of Road Furniture At Ins Parundu Under Ge Tirunelveli.
Tender Value
27 Lakhs
Estimated cost
Bid Submission
06 Oct 2025
0 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Resurfacing Of Roads And Renewal And Replacement Of Road Furniture At Ins Parundu Under Ge Tirunelveli.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Sep-2025 |
| 2 | 30-Sep-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Oct-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" |
| 2 | Repair to pot holes, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm depth, making good by filling in screened and graded road metal, watering and well ramming, including supply of road metal/ aggregates, complete all as specified and directed. |
| 3 | Material and Labour for Preparing of existing black top surfaces of roadby using air compressor, brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., andapplying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 3kg/10 sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed. |
| 4 | Material and labour for Bituminous premix semi dense asphaltic concrete (SDAC), 30mm consolidated thickness with 5.5% binder content of paving bitumen by weight of total mix usingVG-30 grade bitumen, rolled and compacted to required camber and gradient complete using mechanical paver and rolled using power roller 8 to 12 tonne capacity complete all as specified and directed.Note: The contractor\"s quoted rates shall also be deemed to include the following element:-(i) In case of variation in the binder content as per approved design mix in comparison with the binder content as specified above, the variation in qty of binder content on lesser side shall be adjusted through supply only rate of Bitumen VG-30. However, variation on the upper side shall be carried out by the contractor without any price adjustment. |
| 5 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 6 | M&L Premix bituminous, macadam with 4% binder content of paving bitumen by weight of total mix using VG-30 grade bitumen laid using mechanical paver rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capcity consolidated thickness 75mm or less complete all as specified and as directed. |
| 7 | M&L for Moorum/red bajri 50mm thk filling in berms along the side of the road, spread, levelled and rolled including watering complete all as specified and as directed. |
| 8 | Supply and fixing cat eye solar reflective type ofmetal body alloy of size 100mm x 100mm x 20mmwith PAMA striplens reflector of model No. DA972.0 fixed with and incl MS stud of suitable sizeas per manufactures instructions |
| 9 | Supply and fixsolar cat eye aluminum alloy shell(100% water proofing design according to 65) ofsize 125mm x 125mm x 25mm (shank 65mm) ofhigh efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd complete as permanufacture\"s instructions. all as specified and as directed. |
| 10 | Supply and fixing in repair metal tubular delineator madeout of ABS round body fitted with 2 Nos 65 mmdia highly reflective reflectors made out of PMMAand mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellowreflector radium tape of 25 mm widestrips with anti theft steel net for reflectorprotection including embedding in PCC 1:2:4(150x150x300mm) type B1 complete all asspecified and as directed. |
| 11 | Supply and fixingin repairs road safety convex mirror made up of polycarbonate reflective and body made up of ABS plastic orange colourof size 100 CM dia fixed with clamps including (1No) MS pipe 75mm dia of length 2.4m duly painted with two coats of synthetic enamel paintover a coat of red oxide primer including dismantling of old mirror post and embedded in PCC 1:2:4 (using 20mm graded stone aggregate) of size 45cmx45cmx45cm including returning filling and removal of surplus soil complete all as specified and as directed. |
| 12 | Manufacturing, supplying and fixing in repair retroreflective Mandatory/ Regulatory sign boardsof 900 mm diametre with support length of3750 mm and made up of 2 mm thickaluminium sheet, face to be fully covered withhigh intensity encapsulated type heatactivatedretro reflective sheeting conforming to type - IVof ASTM-D 4956-01 in blue and silver white orother colour combination including subjectmatter, message (bi-lingual), symbols andborders etc. as per IRC ; 67:2001, pasted onsubstrate by an adhesive backing which shallbe activated by applying heat and pressureconforming to class -2 of ASTM-D-4956-01 andfixing the same with suitable sized aluminiumalloy rivets at 20 cm c/c to back support frameof M.S. angle iron of size 25x25x3 mm alongwith theft resistant measures, mounted andfixed with 2 Nos. M.S. angles of size 35x35x5mm to a vertical post made up of M.S. Teesection ISMT 50x50x6 mm welded with baseplate of size 100x100x5 mm at the bottom endand including making holes in pipes, anglesflats, providing & fixing M.S. message plate ofrequired size, steel work to be painted with twoor more coats of synthetic enamel paint ofrequired shade and of approved brand &manufacture over priming coat of zincchromate yellow primer (vertical MS-Teesupport to be painted in black and whitecolours).Backside of aluminium sheet to bepainted with two or more coats of epoxy paintover and including appropriate priming coatincluding all leads and lifts etc. complete asper drawing , specification and direction ofEngineer-in-charge |
| 13 | Manufacturing, supplying and fixing inrepair retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets at 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up of M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 14 | Manufacturing, supplying and fixing in repair Retro reflective regulatory sign board of size 900 mm diameter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67:2001 with required colour scheme on the boards and withhigh intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge |
| 15 | Schedule of credit amount brought back from Ser Page No.33- Rs. 4900.00 will be deducted from the above quoted amount to derive the contract sum. SIGNATURE OF CONTRACTOR |
AI Tender Summary
Tender Timeline
Sep 30, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 06, 2025
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 06, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 08, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender