Supply And Installation Of Different Type Of Furniture For Different New Chambers For The Official Use Of The Purtha Bhawn Jalpaiguri- 1 ARISTO suit table with back unit Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.Back unit -Dimensions 1800x500x750 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.This product should be certied by greenpro by cii, greenguard by ul, Griha 2019, Indoor advantage gold by SCS certification. 2 MARVEL HIGH BACK CHAIR 1) SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) 2) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm 3) ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.4) ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360 revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. 5) SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.6) ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 7) PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.8) PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)9) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter.Back: 47.7 cm. (W) x 76.4 cm. (D) , Seat :47.0 cm. (W) x 48.0 cm. (D) Overall Dimensions of Chair Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.This product should be certified by greenpro by cii, greenguard by ul, griha 2019, indoor advantage by scs certification. 3 OXBO VSITOR Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back asembly. should bemade of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 70.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. ARMRESTS: The one-piece armrests should beinjection moulded from black Co-polymer Polypropylene.CENTRE-TILT mechanism: The mechashould be m should bedesigned with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre• Upright position locking.Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should beinjection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 99.5 to max 110.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.This product should be certified by Indoor Advantage GOLDby SCS& GREEN PRO by CII.The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 4 GAIN PRO STORAGE UNIT Product Size - 1200(W) x 450(D) x 1950*(H) (Height of leveler is 50mm and adjustment possible is 15mm.Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form arow of storage.(Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered)Legs fitted with screw type leveler.Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 450W/600W and 0.8mm CRCA for 900W/1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS-513Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of -80kg UDL for 1200W unit4 Nos. of fixed shelves for 1950(H) / 5 Nos. of fixed shelves for 2325(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels-1200 w = 13 no of filesFinish - Epoxy Polyester Powder coated to the thicknessof 50 microns (+/-10 micron).DOOR - Product Size - 2 Doors (LH and RH) for 900W For900W storage-Each Door width 448WConstruction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing HingeHandle - Asthetically appealing handle made of AluminumCam Lock --3 Way locking provision.- Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing.Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of -55kg UDL for 900W unit4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows:900 w = 10 no of filesFinish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.This product should be certified from Greenguard by UL and Indoor advantage gold by SCS. 5 PISA 2 SEATER Providing, supplying and placing of two seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.he product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 6 PISA 3SEATER Providing, supplying and placing of three seater sofa. SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 7 VICTORIA COFFEE TABLE Dimensions W x H x D (cm) Overall Size : Width : 119.9cmDepth : 59.9cmHeight : 45cm Primary Material - Plywood Finish Color - Walnut Maximum Load Capacity (kg) - 50 Wheels Included - No Vintage era inspired colour and design, with curved legs and a walnut finish, that adds a classic charm to the space. • Made of high-density plywood and a rubber wood underframe, this clean design free of unnecessary details makes it easy to maintain. • 24mm thick surface that can support up to 50 kgs.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 8 BEAT HIGH BACK LEATHERTTE Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured. ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. HIGH BACK SIZE:51.8 cm. (W) x 75.2 cm. (H) , SEAT SIZE:49.0 cm. (W) x 48.8 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5cm range) • Height adjustable armrest structure which is chrome plated & fitted with an armrest top. • Fixed Armrest Topis PU moulded over metal insert.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2 .BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. PEDESTAL ASSEMBLY WITH CASTORS:The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in black PP .Overall Dimensions of Chair Seat Height - min 45.0 to max 55.0cm. Height - min 102.0 to max 119.0 cm. Width & Depth of Chair as measured from pedestal - Width-750 cm and Depth-75.0 cm.This product should be certified by GREENGUARD GOLD BY UL & GRIHA2019 & SVAGRIHA.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 9 FINESSE TABLE SUIT WITH CREDENZA UNIT Providing, supplying and installation of executive table whose overall size shall be 1800 Width mm x 900 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.ERU -size shall be 1550 Widthx 450 Depthx 705 Height.The top ofFinesse ERU -5216 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.Backunit - sizeshall be 1280 Widthx 425 Depthx 705 Height. Top ofFinesse HDU - 4315 shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.This product should be certified by Indoor advantage gold by SCS . Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre 10 VERSA CANVAS VISITOR CHAIR Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with foam laminated fabric and moulded High Resilience Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression. The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with foam laminated fabric. Seat SIZE : 46.0 cm. (W) x 48.0 cm. (D) BACK SIZE : 46.6 cm. (W) x 59.6 cm. (D) VISITOR TUBULAR FRAME : The powder coated (DFT 40-60 micron) tubular frame should becantilever type & made of 02.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.The back connected to frame through powder coated (DFT 40-60 micron) high pressure die cast connector piece. Overall Dimensions of Chair Seat Height - 44.6cm. Height - 98.2cm. Width-60.9 cm and Depth-64.3 cm This product should be certified by Indoor Advantage GOLD BY SCS, GREENGUARD GOLD BY UL, BIFMA Level 2 & GREEN PRO BY CII.Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre. 11 GAIN PRO STORAGE UNIT Product Size - 1200(W) x 450(D) x 1950*(H) (Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form arow of storage. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 450W/600W and 0.8mm CRCA for 900W/1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS-513 Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of - 80kg UDL for 1200W unit 4 Nos. of fixed shelves for 1950(H) / 5 Nos. of fixed shelves for 2325(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels- 1200 w = 13 no of files Finish - Epoxy Polyester Powder coated to the thicknessof 50 microns (+/-10 micron).DOOR - Product Size - 2 Doors (LH and RH) for 900W For900W storage-Each Door width 448W Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The product must have in house test certificate. Manufacturer should have Green Guard (By UL), Green Pro , GRIHA, Indoor Advantage certification along with products certifications of some products of its basket including AIOTA, INDIAN DESIGN MARK, BIFMA level 2 conforms to ANSI/BIFMA e3-2014e Furniture Sustainability Standard issued by BIFMA. Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 is mandatory. the ISO certificates should be obtained from NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.This product should be certified from Greenguard by UL and Indoor advantage gold by SCS.
