Tender For Provision Of Unisex Toilet Block Near Bldg No T-43, School Of Arty Devlali => Limited; 1 M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450 X 300 X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. 2 M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified. 3 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 4 S&Frotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 15mm bore complete for following capacity of tanks. 5 Supplying and laying of GI pipes 15mm Tubes, light grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. 6 Supplying and laying of GI pipes 25mm Tubes, light grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified. 7 Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. 8 S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed. 9 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. 10 S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed. 11 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 12 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 13 S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 14 S&F 75 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 15 S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 16 S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. 17 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and directed. 18 Returning, filling in soft/loose/hard/dense soil including spreading, levelling, watering & well ramming in layers n.exc 25cm complete all as specified and directed. 19 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. 20 M&L for 150mm bore Reinforced concrete pipes single socketed, class NP-2, laid and jointed, complete all as specified and as directed. 21 M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm & bore pipe, complete all as specified and as directed. 22 M&LPre-cast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in manhole cover/slabs and placing in position including necessary form work in CM 1:6 complete all as specified and directed. 23 M&L for On site Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 3 M effective depth etc complete all as specified and directed. 24 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan. 25 S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texturewith density not less than 650 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified and directed. 26 S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed. 27 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. 28 S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed. 29 S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. 30 M&L for 250mm longStainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed complete all as specified and as directed. 31 S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel pattern sheet 0.47mm to 0.50mm thick of an colour having tensile strength of 550Mpa and AZ-150 as in roof covering in hexagonal/rectangular/pentagonal shape cladding to wall fixed with self tapping screws as specified. Make: JSW Colouron+ or Equivalent in TATA 32 S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47mm to 0.50mm thick of anycolour having tensile strength of 550Mpa and AZ-150 as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. JSW Colouron+ or Equivalent in TATA 33 M&L in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. 34 M&L for Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe 410W (gde-E-250) quality A complete all as specified and directed. 35 M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 36 M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using(40 mm graded stone aggregate ) as in Plinth protection. 37 M&L Flyash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. 38 M&L for Rendering 15mm thick in cement morter 1:4 on fair faces of brick work/concrete surfaces including neeru finish to plastering as specified. 39 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. 40 M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed. 41 Anti-termite treatment the top surface of filled earth at therate of 5 lit of emultion per sqm of surface area. 42 Anti-termite treatment the soil under plinth protection at theat therate of 5 lit of emultion per sqm of surface area. 43 M & L for providing reinforced cement concrete (1:1.5;3), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. 44 M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. 45 M&L TMTbars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. 46 Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. 47 Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed.Note : Distrubed surfaces of wall shall be made good to true surface. 48 M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation & massconcrete etc complete all as specified and directed. 49 M&L forTwo Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer,inc. preparation of surface of newly decorated wall etc complete all as directed. Make Asian Apex Ulltima or equivalent. 50 M&L for providing & fixing in repair false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos T of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main T at 600 mm c/c toform a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent 51 Material and labour for point wiring with stranded copper conductor PVC insulatedunsheathed 1.5 Sqmm FRLSHcable in and includingPVC casing caping /PVC Conduit inside Ceilings of suitable sizeincluding provision of PVC modular type terminal boxes of suitable module made with pvc sheet and suitable for fixing modular type switches, including cover plates of suitable sizes and modules of appropriate sizes and all requisite accessories such as elbows, tee, collars,bendwith one single core contineous 1.5 sqmm FRLSH copper cable for earth wire complete all as specified for the following:-(a) One 5 pin socket outlet. 5 Amps on the independent. Board. 52 (b) One 5 pin socket outlet. 5 Amps on the same board 53 (c) One light point/ fan point controlled by one switch 54 All as per item no 2 here in before but one 15 A socket outlet independent with 2.5 sqmm pvc cable and 2.5 sqmm cable as earth continuity conductor. 55 Supply and fix switch modular type, 1 way, 6 Amps, 1 module complete all as specied . 56 Supply and fix switch modular type, 1 way, 16 Amps, 1 module complete all as specied . 57 Supply and fix modular type socket , 2&3 pin combined,6 Amps,2 module complete all as specied . 58 Supply and fix modular type socket , 3 pin 6 Amps/16 Amps combined, 2 module complete all as specied . 59 S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.Make: Havells (Cat No: LUMILINEBS9WLED865SPCWH) 60 S&F ceiling mounted 2x2 LED Recessed full lit luminaire with glare free uniform illumination with longer life and less maintenance warm white 36 Watt complete pre-wired all as specified anddirected.Make: Havells (Cat No:PLUTONEO2X2PLR34WLED840S) 61 S&F Slim design LED square poly carbonate housing down lighter with superior light out put and integral driver warm white 15 Watt complete pre-wired all as specified and as directed.Make: CROMPTON (Cat No:LESDEP-15-CDL) 62 S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and batten Doubleside connection type complete all as specified anddirected.Make: Havells (Cat No: REGALBATTENT 5UPTO1X18WDSBSWH +CRYSTAL 1213T8DSTL18WLED865SGLASS) 63 M & L sub main wiring with 2 single core, 4 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC Casing and Caping Note :-(i) Two run of copper cable and one run of earth wire and pvc casing caping shall be measured as one length. 64 M & L sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLS cable 1100 Volts grade incl 6.0 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLS as continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC Casing and Caping Note :-(i) Two run of copper cable and one run of earth wire and pvc casing and caping shall be measured as one length. 65 Supply and fix sheet metal enclosure DBs TPN, 415 V, AC 50 Hz, with built in bus bars double door(IP 43) complete all as specified and as directed of 4 WaysHorizontal 66 Supply and fix in replacement MCB TPN, C series40Amps, 415 volts, 10 KA complete all as specified and as directed. Make L&T/C& S/SIEMENS/ LEGRAND/HAVELLS 67 Supply and fix sheet metal enclosure DBs SPN, 240V, AC 50 Hz, with built in bus bars double door(IP 43) complete all as specified and as directed of following sizes:-(a) 8 Ways 68 Supply and fix in replacement MCB SPN, C series40 to 63 Amps, 240 volts complete all as specified and as directed. Make L&T/C& S/SIEMENS/ LEGRAND/HAVELLS 69 Supply and fixMCB SP,C series 6 to 32 Amps, 240 volts complete all as specified and as directed. Make L&T/C& S/SIEMENS/ LEGRAND/HAVELLS 70 Supply and Fixing/Install New Exhaust Fans PVC body150 MM Sweepwithaccessories and eletric connection complete all as specified and as directed. Make:-HavellsVentil Air DX / DX-HS White 71 Supply, Laying , jointing and testingof LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable ISI marked, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed offollowing sizes:-(a) 4 core 16 sqmm 72 Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed. 73 Supply & lay in trenches double walled corugated HDPE pipe 50 mm dia high density for protection of under ground cables( Note: pipe couplers with seal, bends, end coversetc are deemed to be included in rate quoted) 74 Returning, filling in excavated soil in trenches including spreading, leveling, watering and well rammingin layers n. exc. 25 cm thick complete all as specified and directed 75 Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 76 Supply and Fix MCB TPN , 415 V , 10 KA 63 Amp to the existing Bus bar / LT panel all as specified and directed. 77 M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanised earth lead wire 4.0 mm diaby means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of soil/stata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified and indicated including testing on completion NOTE: 1.The unit rate includes earth strip/GI lead wire and protection pipe upto (maximum 7.5 metre) from earth plate to earth point/test point. 2. unit rate includes the rate of excavation and earth work.
