}

Tender For Construction Of All Allied Works With Drainage Of Bathrooms And Other Work In Bmo Office Complex Assar., doda-Jammu And Kashmir

Public Works Department has published Tender For Construction Of All Allied Works With Drainage Of Bathrooms And Other Work In Bmo Office Complex Assar.. Submission Date for this Tender is 15-09-2025. Drainage Tenders in doda Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

50994474
Tender For Construction Of All Allied Works With Drainage Of Bathrooms And Other Work In Bmo Office Complex Assar.
Tender
Indian
Jammu And Kashmir
Doda
15-09-2025

Tender Details

Construction Of All Allied Works With Drainage Of Bathrooms And Other Work In Bmo Office Complex Assar. As Per Nit/Sbd- Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 3 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) 4 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer 5 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 6 Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 7 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlleddevice (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. 8 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. 9 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 10 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 11 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 12 Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 13 Providing and fixing 15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 14 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Internal work-exposed on wall,ncluding fixing the pipe with clamps at 1.00 meter spacing 15mm nominal outer dia pipes. having thermal stability for hot and coldwater supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer-in-charge. 15 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete. 16 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter 17 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangementof approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. 18 Dismantling of flushing cistern of allypes(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal ofunserviceable materials within 50 meters lead 19 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White 20 Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 21 15 mm nominal bore with 30 cm length. 22 15 mm nominal bore with 45 cm length. 23 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 24 Providing & fixing 25.00Ltr. Wall mounted Geyser including PVC connection, angle Valve complete job as directed by Engineer-In-Charge 25 Providing and fixing PVC pipes 110 mm dia in kitchen, Bath etc. all complete job as directed by Engineer-In-Charge. 26 Providing and fixing PVC pipes 75 mm dia in kitchen, Bath etc. all complete job as directed by Engineer-In-Charge. 27 Electric wiring with 1.5sq mm copper cabbleincluding 20mm dia2mm thick PVC pipe 5amp switchsukan box and connection to the main pole complete as directed by engineer in charge 28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 32 mm dia 29 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of30x260x350mm and 340x410x265 mm sizesrespectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 literwhite P.V.C automatic flushing cistern. 30 Labour required for clearance of dismanteled Material 31 CARRIAGE OF MATERIALSBy Mechanical Transport including loading, unloading and stacking complete. 32 Carriage of Sand / Dust avg. lead of 45km by MT 33 Carriage of stone aggregate (Below 40 mm)avg. lead of 30 km by MT

Key Value

Document Fees
INR 600 /-
Tender Value
INR 3 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail