|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : |
| 4 | Local best quality Uningthou wood |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 6 | Local best quality Tolhao wood. |
| 7 | 35 mm thick shutters |
| 8 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | 0.63 mm thick with zinc coating not less than 275gm/sqm |
| 10 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. |
| 11 | 0.63mm thick with zinc coating not less than 275gm/m2 |
| 12 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (framework to be paid separately): |
| 13 | Standard quality hard board sheet: |
| 14 | 4.5 mm thick |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 16 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 18 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 20 | 15 mm nominal outer dia Pipes |
| 21 | 20 mm nominal outer dia Pipes |
| 22 | Providing and fixing UPVC soil waste rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in charge |
| 23 | 75mmdia |
| 24 | 100mm dia |
| 25 | Renewing glass panes, with putty and nails wherever necessary: |
| 26 | Float glass panes of thickness 4 mm |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 28 | New work (two or more coats) over and including priming coat with cement primer:- |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 30 | Two or more coats on new work over an under coat of suitableshade withordinary paint of approved brand and manufacture. |
