Tender For Dt Increasing Work Under Bp 2025-26 Under Edsd First Under Edd,Barabanki. - Safe Loading Carriage Including Unloading And Proper Stacking Of Following Materials From Central Store Barabankito Site Of Work. 2 Pcc Pole 8.5 Mtr Long 3 S/S Base, barabanki-Uttar Pradesh

Tender For Dt Increasing Work Under Bp 2025-26 Under Edsd First Under Edd,Barabanki. - Safe loading Carriage including unloading and proper stacking of following materials from central store Barabankito site of work. 2 PCC POLE 8.5 MTR LONG 3 S/S Base Angle 4 T/F11/0.4KV, 25 KVA 5 T/F11/0.4KV, 63 KVA 6 T/F11/0.4KV, 100 KVA 7 T/F11/0.4KV, 250 KVA 8 T/F11/0.4KV, 400 KVA 9 MS Top Channel 10 MS Channel (Dropper) 11 LT ABC (3*120+1*95+1*16) SQMM 12 LT ABC (3*95+1*70+1*16) SQMM 13 LT ABC (3*50+1*35+1*16) SQMM 14 Single Core LT Cable (1*240)SQ MM 15 Single Core LT Cable (1*400)SQ MM 16 11 KV Composite Polymer Pin Insulater with N&B 17 11 KV Composite Polymer Disc Insulator With Fitting 18 11 KV V-type Cross Arm 19 F-Clamp 20 Earthing Rod 21 ACSR Rabbit CONDUCTOR 22 GI wire 8 SWG 23 Stay Set complete 24 3 phase distribution box 25 Dragging of pole fromStore to site 26 Grouting Of STP/PCC Pole 27 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting. 28 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 29 Mounting of 25 KVA Tranformer 30 Mounting of 63 KVA Tranformer 31 Mounting of 100 KVA Tranformer 32 Mounting of 250 KVA Tranformer 33 Mounting of 400 KVA Tranformer 34 Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) 35 Errectionof Substation type double pole with PCC including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 36 Erectionof singlePCCPole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 37 Stringing and Sagging of LT single core Cable (1x400+1x240) SQMM (LT Cable will be provided by the department) 38 Stringing and Sagging of LT ABC Cable(3*120+1*95+1*16) & (3*95+1*70+1*16) and (3*50+1*35+1*16) SQMM (LT Cable will be provided by the department) 39 MS Earthing Rod. 40 Installation of 3 phase distribution Box 41 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 42 Nut & Bolt 43 Clamp for Top/ Dropper and T-off Channel etc. 44 Piercing Connector 45 Dead End Clamp 46 Suspension Clamp 47 PG Clamp free size for ACSR Conductor 48 Copper L-piece 49 Shackle Insulator 50 Al Lug 95 sqmm 51 Al Lug 120 sqmm 52 Al Lug 240 sqmm 53 Al Lug 400 sqmm 54 3 Phase D.O FUSE SET Complete 55 Construction Of LT DistriBution Cum LT Protection Piller Box MS Angle in RectangleSize 50x50x6 MM 7.5Meter long For installation Of Henley Type Tailleness Fuse Unit 300 AMP 650 Volt For 3 nos Outgoing Circuits With Copper Bus bar OF size 1000x50x6 mm Including Proper Grouting of Structure By Digging OF pits Off Size 300x300x600 mm With the Help Of Cement, Coresand And Aggregate in the ratio 1:3:6 And Fabrication of structure Complete. 56 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 57 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4 thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 58 Erection of pipe type earthng for DT with the help of B-Class G.I pipe of size 1.5 inch dia, 40 feet deep boring by providing G.I strip 50x6 MM, 6 meter long attached with clamp L-piece nut & bolt & G.I cap 59 Dismentaling of 10/16/25/63/100/250 KVA T/F & Carriage site to store

INR 3540 /-

INR 27.85 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB