Tender For Furnishing & Electrical Work At Canara Bank Sector 17 C Chandigarh Branch., Chandigarh-Chandigarh

Tender For Furnishing & Electrical Work At Canara Bank Sector 17 C Chandigarh Branch. A) P&F false ceiling with Gypsum Board 12.5mm thick fixed to a metal frame comprised of ceiling channel of size 80mm X 26mm X 0.5mm @ every 450 cms centres, inter channel 45mm X 15mm X 0.9mm @ every 1220mm centres, peri-meter channel 20mm X 26mm all along the wall, strap hanger suspendeds 25mm X 0 5mm with nuts and bolts 6.4mm x 12.7mm, connecting clip 2.64mm thick, dry walls screw 25mm long , soffit cleat. 27mm X 37mm X 25mm X 1.6mm thick and dash fasterner/ rawl plug 12.5mm dia X 35mm long with 6mm dia bolt. The joint of gypsum board to be taped 3 times and sealed with jointed compound with three coat plastic emulsion paint finished. Coves & Cut-out be provided to accommodate luminaries, air conditioning grills and fire warming detectors if any. The rate to include two or more coats of approved paint after preparing the surface. All fitting to be separately hung from the ceiling and should not rest on the false ceiling. (Only Plan area considered for payment) Providing & fabricating & fixing of low height partition made out with Aluminium Section framework consisting of 2”× 1” sections placed at minimum 2’-0” × 2’-0” horizontal & vertical (as per site requirement) with 9 mm HDHMR MDF finished with 1 mm thick high gloss laminate (of approved shade) on both sides (as approved). Partition will be 4’-6” high (as per design) with 12 mm thick toughened glass clear including frosting /etching as per design fixed with T.W beading with with polish finish. Top &other edges / sides finished with T.W. beading with . All sides of partition finished with high gloss laminate & necessary hardware approved & edges finished with T.W. beading with with melamine polish finish. 12 mm toughened glass will be supported by box pillar made out of 12 mm IS 303 HDHMR MDF with support of Aluminium Section. With all side high gloss laminate & T.W. beading finished with with polish finish as per design.Top edge of 12 mm toughened glass will be with diamond cut & diamond edge polish includes making required cut out. including all necessary required hardware ,fitting as per approved by architect/engineer in incharge

Refer document

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB