Providing Fencing Material For Plantation Areas - Line Wire - Galvanized Steel Wire Of 2.5 Mm Diameter.Point Wire - Galvanized Steel Wire Of 2.5 Mm Diameter.Barbs - Distance Between Two Boards 75Mm, The Barbs Shall Have Four Points And Shall Be Formed By , Dhar-Madhya Pradesh

Providing Fencing Material for Plantation Areas - Line Wire - Galvanized steel wire of 2.5 mm diameter.Point wire - Galvanized steel wire of 2.5 mm diameter.Barbs - Distance between two boards 75mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.Standard- Conforming to IS-278-2009 2 RCC Fencing Poles2.00 M.Type- Straight. Lenght-2.00 m. Dimensions- Bottom 10x10 cm. spuare, Top 8x8 cm spuare Cement Concerete Mix- Cement, Sand and metal ratio 1:2:4 with 12.5 nominal size coareseaggregate. Sand used should be free frtioncby and salt concrete mix shell be conforming to grude m-15 of IS-456-2000 Reinforeement - 4 round verticul bars of 6 mm diametar 11 on of stirrups of 6mm Diametar round ms bars 20 cm centre to Centre Hooks - 5 no.bottom hook shouldbe provided 60 cm above the bottom of the pole second at 82.5 cm third hook at 112.5 cm fourth hookat1.150 cm top and fifth hook at 195 cm from bottom. Manufacturiong - In order to ensure desired compressiveRcc fencing polesshould be comacted with the help of plamorn vibiatiry Surfse should be uniform andfree from voids the concrete owe the reinforcement should Not be less Then rain 1. 5 c m 3 PRE STRESSED RCC FENCING POLES Type- Straight Length - 2.00 mDimensions - Bottom 10x10 cm square, Cement Concrete Mix- Concrete Mix Shall be conforming to grade M-15 of IS:456:2000Reinforcement - There Shall be 4 Nos. of vertical reinforcement of high tesile steel wire of 4 mm dia. Holes Hooks - 6 nos, bottom hole should be provided 50 cm above the bottom of the poles, The central distance between the top and bottom holes shall be equally divided for remaining holes. J Hook shall be of 6mm dia MS Bar with proper threads at one end nut and washer for tightening purpose. These J bolts shall be pass through the holes of poles.Manufacturing- In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm.Standard - Conforming to IS 4996:1984 with up to date amendments. 4 MS- Corrosion Resistant U shape Stainless Steel 5 Mesh Wire - Galvanized steel wire of 3.15 mm diameterFabric Size- 75x75 mmHeight-150 cmLine Wire-2 numbers of line wires of 4.00 mm diameterStandard- Conforming to IS-2721-2003, with up to date - amendments. 6 Mesh Wire - Galvanized steel wire of 3.15 mm diameterFabric Size- 100x100 mmHeight-150 cmLine Wire-2 numbers of line wires of 4.00 mm diameterStandard- Conforming to IS-2721-2003, with up to date - amendments.

INR 1000 /-

INR 1.48 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB