Tender For Under Electricity Secondary Works Division-Gorakhpur For The Iincreasing Capacity (1X5 Mva To 2X5 Mva)Of 33/11 K.V.Sub – Station Chehari , Increasing Capacity (1X10 Mva To 10+5 Mva)Of 33/11 K.V.Sub – Station Addabazar ,Increasing Capacity (1X10, Mahrajganj-Uttar Pradesh

TDR : 50978252

Tender Notice
BOQ

Expired

Mahrajganj , Uttar Pradesh

Tender Brief : Tender For Under Electricity Secondary Works Division-Gorakhpur For The Iincreasing Capacity (1X5 Mva To 2X5 Mva)Of 33/11 K.V.Sub – Station Chehari , Increasing Capacity (1X10 Mva To 10+5 Mva)Of 33/11 K.V.Sub – Station Addabazar ,Increasing Capacity (1X10

Document Fees
₹ 3540 /-

EMD
₹ 47000.0 /-

Tender Value
Refer document

Submission Date
09-09-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Work-01 ChehariPart A (Materials Provided by contractor)
2	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
3	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
4	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
5	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
6	2×2.5 mm2 Copper Control Cable
7	4×2.5 mm2Copper Control Cable
8	GI pipe 6\" diaover the 3x300/185 sqmm XLPE cable
9	Holding Clamp for 3×300 XLPE 11 KV Cable
10	MS dropper Channel
11	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
12	M.S. Nut Bolt off size with washer
13	Structure For cable support &\"L\" Type Structure for Neutral
14	P.G Clamp For Dog to Dog
15	Rubber Mat
16	Part BShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Chehari, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 15 km)
17	3×300 mm2, 11 KV XLPE Cable
18	33 KV VCB 800A, 750 MVA with Steel Structure
19	11 KV VCB 600/300/5A , 350 MVA I/C
20	11 KV VCB (Out going) 200/100/5A 350 MVA
21	11 KV 3×185 mm2 XLPE Cable
22	33 KV LA
23	Structure of 33 KV LA
24	33 KV C.T 400/200/1A
25	Structure of 33 KV CT
26	33 KV Fuse Set
27	Structure of 33KV Fuse set
28	33 KV Bus Isolator
29	Structure of 33 KV Bus Isolator
30	ACSR Dog Conductor
31	33 KV Post Insulator
32	Structure of 33 KV Post Insulator
33	90 Ib,Rail pieces (44.64 Kg/M)
34	Control Panel I/C for 33KV Double T/F
35	11 KV Bus Coupler
36	Fresh T/F Oil
37	Earthing of S/sOutdoor equipments (earthmat)
38	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
39	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 30’ longand other earthing materials required.
40	Filling of Transformer oil In Installed 5 MVA Power Transformer
41	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
42	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
43	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
44	providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
45	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
46	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
47	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
48	GI PipeEarthing Complete forCable jointing Kit with materials
49	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
50	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
51	Testing of 11 KV switchgear panel in all respect.
52	Laying of various typt of control cables
53	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
54	Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials.
55	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
56	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
57	Erection grouting and earthing of following structure.
58	33 KV Bus Isolator structure
59	33 KV fuse set structure
60	33 KV Post insulator structure
61	33 KV L.A. structure
62	Mounting and fitting of equipment on erected structures.
63	33 KV Bus – Isolator 400 Amp.
64	33 KV Post Insulator
65	33 KV LA
66	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
67	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
68	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
69	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
70	Dismantling of existing pale fencing and resetting after completion of transformer work.
71	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
72	Work-02 Adda bazar Part A (Materials Provided by contractor)
73	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
74	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
75	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
76	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
77	2×2.5 mm2 Copper Control Cable
78	4×2.5 mm2Copper Control Cable
79	GI pipe 6\" diaover the 3x300/185 sqmm XLPE cable
80	Holding Clamp for 3×300 XLPE 11 KV Cable
81	MS dropper Channel
82	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
83	M.S. Nut Bolt off size with washer
84	Structure For cable support &\"L\" Type Structure for Neutral
85	P.G Clamp For Dog to Dog
86	Rubber Mat
87	Top Channel 100x50x6 mm, 2400 mm long
88	MS Channel (Dropper) 100x50x2028mm
89	Holding Clamp
90	Complete Stay Set
91	Disc Fitting for T&C 45 KN
92	Disc Insulator T&C 45 KN
93	Polymeric 11KV Pin Insulator
94	Nut Bolt and washer all sizes
95	Danger Plate with clamp and Nut & Bolt
96	M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
97	Barbered Wire
98	Part BShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station AddaBazar, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 60 km)
99	3×300 mm2, 11 KV XLPE Cable
100	33 KV VCB 800A, 750 MVA with Steel Structure
101	11 KV VCB 600/300/5A , 350 MVA I/C
102	11 KV VCB (Out going) 200/100/5A 350 MVA
103	11 KV 3×185 mm2 XLPE Cable
104	PCC 8.5 Mtr Long
105	33 KV LA
106	Structure of 33 KV LA
107	33 KV C.T 400/200/1A
108	Structure of 33 KV CT
109	33 KV Fuse Set
110	Structure of 33KV Fuse set
111	33 KV Line Isolator
112	33 KV Bus Isolator
113	Structure of 33 KV Bus Isolator
114	ACSR Dog Conductor
115	33 KV Post Insulator
116	Structure of 33 KV Post Insulator
117	90 Ib,Rail pieces (44.64 Kg/M)
118	Control Panel I/C for 33KV Double T/F
119	Fresh T/F Oil
120	11 KV Bus Coupler
121	Earthing of S/sOutdoor equipments (earthmat)
122	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
123	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 30’ longand other earthing materials required.
124	Filling of Transformer oil In Installed 5 MVA Power Transformer
125	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
126	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
127	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
128	providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
129	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
130	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
131	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
132	GI PipeEarthing Complete forCable jointing Kit with materials
133	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
134	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
135	Testing of 11 KV switchgear panel in all respect.
136	Laying of various typt of control cables
137	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
138	Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials.
139	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
140	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
141	Erection grouting and earthing of following structure.
142	33 KV Bus Isolator structure
143	33 KV fuse set structure
144	33 KV Post insulator structure
145	33 KV L.A. structure
146	Mounting and fitting of equipment on erected structures.
147	33 KV Bus – Isolator 400 Amp.
148	33 KV Post Insulator
149	33 KV LA
150	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
151	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
152	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
153	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
154	Dismantling of existing pale fencing and resetting after completion of transformer work.
155	Erection of Double pole on 8.5 Mtr.Long PCC. pole & mounting of all its accessories etc.complete work.
156	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
157	Work-03 Lakshmipur Part A (Materials Provided by contractor)
158	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
159	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
160	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
161	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
162	2×2.5 mm2 Copper Control Cable
163	4×2.5 mm2Copper Control Cable
164	GI pipe 6\" diaover the 3x300/185 sqmm XLPE cable
165	Holding Clamp for 3×300 XLPE 11 KV Cable
166	MS dropper Channel
167	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
168	M.S. Nut Bolt off size with washer
169	Structure For cable support &\"L\" Type Structure for Neutral
170	P.G Clamp For Dog to Dog
171	Rubber Mat
172	Part BShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Lxmipur, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 60 km)
173	3×300 mm2, 11 KV XLPE Cable
174	33 KV VCB 800A, 750 MVA with Steel Structure
175	11 KV VCB 600/300/5A , 350 MVA I/C
176	11 KV VCB (Out going) 200/100/5A 350 MVA
177	11 KV 3×185 mm2 XLPE Cable
178	33 KV LA
179	Structure of 33 KV LA
180	33 KV C.T 400/200/1A
181	Structure of 33 KV CT
182	33 KV Fuse Set
183	Structure of 33KV Fuse set
184	33 KV Bus Isolator
185	Structure of 33 KV Bus Isolator
186	ACSR Dog Conductor
187	33 KV Post Insulator
188	Structure of 33 KV Post Insulator
189	90 Ib,Rail pieces (44.64 Kg/M)
190	Control Panel I/C for 33KV Double T/F
191	11 KV Bus Coupler
192	Fresh T/F Oil
193	Earthing of S/sOutdoor equipments (earthmat)
194	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
195	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 30’ longand other earthing materials required.
196	Filling of Transformer oil In Installed 5 MVA Power Transformer
197	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
198	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
199	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
200	providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
201	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
202	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
203	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
204	GI PipeEarthing Complete forCable jointing Kit with materials
205	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
206	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
207	Testing of 11 KV switchgear panel in all respect.
208	Laying of various typt of control cables
209	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
210	Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials.
211	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
212	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
213	Erection grouting and earthing of following structure.
214	33 KV Bus Isolator structure
215	33 KV fuse set structure
216	33 KV Post insulator structure
217	33 KV L.A. structure
218	Mounting and fitting of equipment on erected structures.
219	33 KV Bus – Isolator 400 Amp.
220	33 KV Post Insulator
221	33 KV LA
222	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
223	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
224	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
225	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
226	Dismantling of existing pale fencing and resetting after completion of transformer work.
227	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
228	Work-04 Nautanwa Tehsil Part A (Materials Provided by contractor)
229	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
230	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
231	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
232	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
233	2×2.5 mm2 Copper Control Cable
234	4×2.5 mm2Copper Control Cable
235	GI pipe 6\" diaover the 3x300/185 sqmm XLPE cable
236	Holding Clamp for 3×300 XLPE 11 KV Cable
237	MS dropper Channel
238	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
239	M.S. Nut Bolt off size with washer
240	Structure For cable support &\"L\" Type Structure for Neutral
241	P.G Clamp For Dog to Dog
242	Rubber Mat
243	Top Channel 100x50x6 mm, 2400 mm long
244	MS Channel (Dropper) 100x50x2028mm
245	Holding Clamp
246	Complete Stay Set
247	Disc Fitting for T&C 45 KN
248	Disc Insulator T&C 45 KN
249	Polymeric 11KV Pin Insulator
250	Nut Bolt and washer all sizes
251	Danger Plate with clamp and Nut & Bolt
252	M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
253	Barbered Wire
254	Part BShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Nautanwa Tehsil, Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 65 km)
255	3×300 mm2, 11 KV XLPE Cable
256	33 KV VCB 800A, 750 MVA with Steel Structure
257	11 KV VCB 600/300/5A , 350 MVA I/C
258	11 KV VCB (Out going) 200/100/5A 350 MVA
259	11 KV 3×185 mm2 XLPE Cable
260	PCC Pole 8.5 Mtr Long
261	33 KV LA
262	Structure of 33 KV LA
263	33 KV C.T 400/200/1A
264	Structure of 33 KV CT
265	33 KV Fuse Set
266	33 KV Line Isolator
267	Structure of 33KV Fuse set
268	33 KV Bus Isolator
269	Structure of 33 KV Bus Isolator
270	ACSR Dog Conductor
271	33 KV Post Insulator
272	Structure of 33 KV Post Insulator
273	90 Ib,Rail pieces (44.64 Kg/M)
274	Control Panel I/C for 33KV Single T/F
275	11 KV Bus Coupler
276	Fresh T/F Oil
277	Earthing of S/sOutdoor equipments (earthmat)
278	Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
279	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 30’ longand other earthing materials required.
280	Filling of Transformer oil In Installed 5 MVA Power Transformer
281	Providing & Jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm2 indoor/Outdoor type
282	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials (delta type earthing)
283	G.I. Stand For neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle , channel support and grouting.
284	providing , erection and Grouting of requiredchannel/angle forcable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F Bushings.
285	Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
286	Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
287	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
288	GI PipeEarthing Complete forCable jointing Kit with materials
289	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
290	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
291	Testing of 11 KV switchgear panel in all respect.
292	Laying of various typt of control cables
293	Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate
294	Separate earthing of Sub-stationIndoor Equipment complete including cost of All materials.
295	Erection, grouting and mounting of “VCB” Structure, fitting of “VCB” on erected structure with complete earthing.
296	Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing.
297	Erection grouting and earthing of following structure.
298	33 KV Bus Isolator structure
299	33 KV fuse set structure
300	33 KV Post insulator structure
301	33 KV L.A. structure
302	Mounting and fitting of equipment on erected structures.
303	33 KV Bus – Isolator 400 Amp.
304	33 KV Post Insulator
305	33 KV LA
306	33 KV fuse set ( Copper strip as required size for 33 KV fuse set)
307	33 KV Line – Isolator 400 Amp.
308	Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
309	Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( Providing alluminium Lug and PG Clamp)
310	Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
311	Dismantling of existing pale fencing and resetting after completion of transformer work.
312	Erection of Double pole on 8.5 Mtr.Long PCC. pole & mounting of all its accessories etc.complete work.
313	Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide & aluminium paint)
314	Work-05 Nichlaul Gramin Part A (Materials Provided by contractor)
315	11 KV cable jointing kit 3×300 mm outdoor heat shrinkable Type
316	11 KV cable jointing kit 3×300mm indoor heat shrinkable Type
317	11 KV cable jointing kit 3×185 mm outdoor heat shrinkable Type
318	11 KV cable jointing kit 3×185 mm Indoor heat shrinkable Type
319	GI pipe 6\" diaover the 3x300/185 sqmm XLPE cable
320	Holding Clamp for 3×300 XLPE 11 KV Cable
321	MS dropper Channel
322	GI pipe/cable(3x185sqmm) & dropper Channel Holding Clamp
323	M.S. Nut Bolt off size with washer
324	P.G Clamp For Dog to Dog
325	Rubber Mat
326	Part BShifting & loading of following materials on private truck at store centre Maharajganj& carriage up to 33/11 KV Sub-Station Nichlaul,Distt- Maharajganj & Un-loading of the same with proper stacking (Distance about0 to 55 km)
327	11 KV Cable 3x300mm² XLPE
328	11 KV 3×185 mm2 XLPE Cable
329	33 KV LA
330	Repairing of plinth and foundation for 10 MVA transformer as per required specification. Dismantling of T/F all connection.
331	Dismentling of existing 2 no body and 1 no Neutral earthing safely of existing 5 MVA power transformer earthing for installation of new 10 MVA T/F and re-earthing of new 10 MVA T/F by old earth strip including providing required length of GI Earth strip .The earthing of 10 MVA T/F Included all work completed as per required specification of RESSPO norms.
332	Dismentling of HT jumpers, 11 KV C/J kit and different earthing of 5 MVA T/F drain out T/F oil after closing wall and opening of radiator for shifting of existing 5 MVA T/F from plinth about 30 mtr. Distance & resetting of All accessories etc. complete work.
333	Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 mm2 Indoor/Outdoor type
334	Laying of 11 KV “XLPE” power cable 3 x 300/185 mm2including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
335	Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.
336	GI PipeEarthing Complete forCable jointing Kit with materials
337	Earthing of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5” dia 30’ longand other earthing materials required.
338	Neutral earthing of 10 MVA T/F Complete including cost of GI Strip, GI Pipe 1.5\" dia and 30\" long and other earthing materials(Delta type).
339	Jumpring from 33 KV Bus bar to LA to 10 MVA transformer etc.( Providing alluminium Lug)
340	Mounting and fitting of equipment on erected structures.
341	33 KV LA
342	Painting of erected structure in switchyard (Applying on coat of good quality red oxide primer & good quality of high class luxol aluminium paint)
343	Dismantling of existing pale fencing and resetting after completion of transformer work.

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Transmission Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Under Electricity Secondary Works Division-Gorakhpur For The Iincreasing Capacity (1X5 Mva To 2X5 Mva)Of 33/11 K.V.Sub – Station Chehari , Increasing Capacity (1X10 Mva To 10+5 Mva)Of 33/11 K.V.Sub – Station Addabazar ,Increasing Capacity (1X10, Mahrajganj-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Under Electricity Secondary Works Division-Gorakhpur For The Iincreasing Capacity (1X5 Mva To 2X5 Mva)Of 33/11 K.V.Sub – Station Chehari , Increasing Capacity (1X10 Mva To 10+5 Mva)Of 33/11 K.V.Sub – Station Addabazar ,Increasing Capacity (1X10, Mahrajganj-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us