Tender For Construction Of M/Shed For E-Charging Station At Isbt Agra - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (DSR 2.8.1) 2 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources) (DSR 4.1.8) 3 Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR 2.27) 4 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 5.3) 5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(DSR 5.1.2) 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more (DSR 5.22.6) 7 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.2.1) 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 9 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (DSR 10.16.1) 10 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (DSR 10.2) 11 Providing 0.63 mm thick with zinc coating not less than 275 gm/m² corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.1.3) 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of pproved brand and manufacture (DSR 13.62.1) 13 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass B25 concrete (DSR 5.9.1) 14 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 15 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² (DSR 12.4.2) 16 Wiring point fan Light/Fan with 1.5 sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC coated with 1.50 sqm FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. (DSR 1.8.2) 17 Wiring for Circuit / submain wiring alongwith 2x1.5 sqmm + 1x1.5 sqmm earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required. (DSR 1.7.1) 18 Supply and fixing of LED Tube Light batten fitting suitable for upto 1 x 22 watt LED tubelight on surface complete in all respect. CAT-AAA. [SI No. 1413(A)] 19 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C: Curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR 2.10.1) 20 Supplying and fixing 63A rating, double pole, 240V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (2.12.2) 21 Supplying and fixing following way, single pole and neautral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isoloar) 8 way, Double Door (DSR 2.3.2) 22 Supply and fixing of 10 sqmm x 2 Core Armoured Cable as per UPPWD SOR (2025). 23 S/F of 1200mm Sweep Ceiling Fan I/c all material, labour, T&P etc. (Old SOR Rates) 24 Supply and fixing of LED Street Light complete 60 to 70 watt Cat AAA(23.15).
