Tender For Repair And Maintenance Of Various Work Of Rvrs Medical College Bhilwara
Tender Value
14.10 Lakhs
Estimated cost
Bid Submission
10 Sep 2025
0 days left
EMD
28204
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhilwara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Of Various Work Of Rvrs Medical College Bhilwara
BOQ
| Sl. No. | Item Description |
| 1 | P&FG.I.Pipes (ExternalWork)withG.I. fittings excludingunion(IS: 1239 Mark)includingtrenching&refillingearthetc. |
| 2 | (a)40mmdianominalbore\"\"B\"Class |
| 3 | P&FG.I.Pipes(ExternalWork)withG.I.fittingsexcludingunion(IS:1239Mark)includingtrenching&refillingearthetc.100mmdianominalbore |
| 4 | (b)WCconnector(Bend)withring110mmdia |
| 5 | (g)SingleTeewithdoor110mm.dia. |
| 6 | Plasteronnewsurfaceonwallincementsandmortar1:3includingrackingofjointsetc.completefinefinish:12mmthick |
| 7 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make asperdirectionofEngineer-in-chargecompletewith6mmthickcommercialplybasefixedtowoodenscrews&washers.Size600x450mmx4mmthick |
| 8 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No.15 mmC.P. Pillarcock(IS:8934 Mark) &32 mmC.P.brass wastecoupling ofapproved make,P.V.C Waste pipe with PVCnut 32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm dia for counter topAdd extra for using 25mm GI waste pipe instead of PVC waste pipe |
| 9 | Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on newwork, over and including, priming coat of whiting to give an even shade including all scaffolding. |
| 10 | Providing&FixingPremiumQualitywhiteglazedvitreouschinaSanitaryWares(IS:2556Mark)of approved make as per direction of Engineer-in-charge including cutting and makinggoodthewallandfloor.WallMountingEuropeantypeW.C. |
| 11 | P&FJetsprayforwaterclosetwithC.P.CopperTubeflangeofapprovedmake. |
| 12 | (e)PipeClip110mmdia |
| 13 | (g)SingleTeewithdoor110mm.dia. |
| 14 | (n)NahniTrapwithJali4”110mmdia |
| 15 | P & F Low level Flushing Cisternof 10 litres capacity (IS : 2556 mark) of approved make with complete fittingsC.I.bracketsdulypainted,brassballcockwithball(IS:1703mark)completeincludingcuttingandmakinggoodthewall:PVCwithPVCbendasperIS:7231. |
| 16 | P&FBibCock(IS:8931Mark),Superiorqualityofapprovedmake:Longbody,15mmnominalboreweightnotlessthan690 gm |
| 17 | Providingandfixing1stqualityMAT&GLOSSYfinishedceramictileconfirmingtoIS:13755andIS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortarbed1:4).Size300mmx 450mm |
| 18 | Providingandfixing1stqualityMATfinishedceremictilesize300x300mmconfirmingtoIS:13755and IS:15622coloursuchaswhite,grey,ivory,fumeredbrown,lightgreen,lightblueandotherlightshades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortarbed |
| 19 | P&FrigidPVCPipe(IS:4985mark)classII/(4Kg./Cm2.)approvedquality/makeincludingjoiningthepipewithsolventcementrubberringandlubricant.110mmdia |
| 20 | P&FJetsprayforwaterclosetwithC.P.CopperTubeflangeofapprovedmake. |
| 21 | Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging on both sides.The stiles and rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of „H‟ section,a uPVC hollow section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/ galvanized M.S.‟U‟ cleats.The shutter frame fitted with a uPVC multi-shambered single panel of size not less than 610mm,havingoverallthicknessof20mmand1mm+/-0.1mmwallthickness.Thepanelsfittedvertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer‟s specification and direction of Engineer-in-charge (For W.C.andbathroomdoorshutter). |
| 22 | Labourchargesforrepairtodoor/windowwithoutusinganymaterialsuchasapplyingrandha(finishing)tighteningofbolts&screwetc. |
| 23 | Dismantlingtileworkinfloorsandroofslaidincementmortarincludingstackingofserviceablematerialanddisposalofunserviceablematerialwithin50meterlead:Forthicknessoftiles25mmto40mm. |
| 24 | Cementconcreteflooring1:2:4(1cement:2coarsesand:4gradedstoneaggregate)finishedwitha floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.75mmthickwith20mmthicknominalsizeaggregate. |
| 25 | Fillingofsunkportionofroofwithearthenpotsofrequiredheightincludingfillingvoidswith1:3:6light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete1:2:4asperspecification. |
| 26 | Renewingglasspanes,withputtyandnailswherevernecessaryFloatglasspanesofthickness5mm |
AI Tender Summary
Tender Timeline
Sep 01, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender