Tender For Consultancy Services For Prep Of Dpr Of Sewage Pipe Line Network For All Units Of Leh Mil Stn., Leh-Ladakh

Tender For Consultancy Services For Prep Of Dpr Of Sewage Pipe Line Network For All Units Of Leh Mil Stn.; 1 Consultancy services for design and preparation of BOQ for sewage pipeline network under the work provision of Consultancy services for prep of DPR for network of sewage pipelines for all units of Leh military station under mentioned design condition :- 2 (a) Required inside temperature : 20 +2°C(b) Ambient temperature : (-) 25°C(c) Altitude : 3500-3520 mtr ( Leh)(d) Detailed scope of work envisaged for the mentioned work are mentioned as below:-(a) Grid levels at 5m x 5m grid interval - XLSX format. 3 (b) Topographical plan with all necessary dimensions & detail in soft copy (DWG) and in hard copy in 1:1000 scale (AO-08 copies) having following details:-(i) Land use Details : Demarcating high vegatation area, cultivation area viz., agricultural residential, commercial, residential shops & business areas etc.(ii) Existing Road Details : Entire road network with road edges marked (3D polyline)(iii) Crossing details : CD Structures, water path etc.(iv) Cultural Details : Places such as worship, graveyard etc.(v) Hydro Details : Ponds, tanks, lakes, streams, canals etc. 4 (vi) Frequency of Geotechnical investigation i.e SBC up to 10m depth or till hard strata is achieved at a grid of 500 sqm for SUMP with atleast one point at location of Sump along sewage pipeline network. Including field soil bearing sampling laboratory and recommendation of the bearing capacity for the design of Sewage pipeline network alongwith sumps.(vi) Contour : Contour at 0.5 m interval or better (or as found suitable as per site condition).(vii) Boundary demarcation : Boundary wall of existing facility will be demarcated and marked in layout drawing. Topgraphical plan with all in hard copy in 1:1000 scale (AO 2 sets).(c) Preliminary field data collection. 5 (viii) Prepartion and design of sewage pipeline network should incorporate both old & new sewage pipeline network showing G/L including dia, self-cleaning velocity, slope, flow of each section and type of pipelines to be used including crossing or wherever burden are encountered as per terrain . Any loft well/ sewage proposed should also be incorporated.(ix) L-section at desired route (as suggested by Engineer in Charge) for each planned route to Sewage pipeline network on hard copy showing chainage interval at 10m (A3/A2 8 sets) in hard and soft copy.(x) Cross section at 10m chainage interval (or as suggested by Engineer-in -Charge for each planned route in hard copy (A3/A4 sheet 8 sets)(e) Calculation of sewage generation & RAW sewage sampling as per CPHEEO manual to be done(f) Design, schedule and specifation of sewage pipeline network system including all related civil, electrical (SCADA proposed shall include electromechanical parameters & sewage in and parameters) & mechanical and other allied works based on feasible technology for sub-zero temerature i.e up to (-) 25 Deg C at high altitude of 3500 mtr to deliver sewage from source to predefined tapping points of Civil STP network being planned by Urban Local Bodies, UT Ladakh as per DPR provided to Chief Engr Leh Zone.(g) Design of civil structure viz sump, tanks, pump/house and related works.(h) Preparation of detailed BOQ & Estimate as per SSR 2020 and submission of report.(j) Vetting of complete design and drawing from NIT/ IIT. 6 (k) The final scheme shall be approved by the E-in-Cs Branch and consultant has to make him available for all discussion and corrections as per their instructions in the scheme.(l) Specification of mech and elect eqpt requires to be used for sewage pipeline network.(m) Prep of bill of quantities, detailed estimate etc of this proposed project scheme.(n) Location type design of manholes, intercepted sump well/ lift well.(o) Submission of particular specification for inviting the tender.(p) Review of work during execution till commissioning under review the consultant should visit the site as and when required by the department maximum to 20 working days at site in minimum 10 visits.(q) All electrical & Mechanical equipment shall be certified by the consultant before making payment by the dept to the main contractor executing the project .(r) During the commissioning period, representative of consultant shall be present and after completion of sewage pipeline network in coordination of Civil STP should give satisfactory certificate to the department that the commissioning is done as per the procedure and executed project is satisfactory.(s) All above documents to submitted in quadruplicate. 7 EXECUTION SCHEDULEThe services shall be provided in following phases :-(a) Complete Technical details of the sewage pipeline network design.Detailed design calculations of all sewage pipeline network alongwith ancilliaries structures, Structure design calculations & Structural design / drawings of all civil / building work.(b) Compiling and submission of three copies hard copies of detailed project report (DPR) including the following:-Complete DPR as per approved CPR with detailed design and calcuations, Structural drawings duly vetted and bills of quantities of all items of buildings work related to sewage pipeline network. As per schedule activities mentioned in schedule of service.(c) Tender documents as required for inviting tender.(d) Supervision of execution of work till commissioning.(e) 80 % of CA amt shall be paid to contractor with completion of DPR. Balance 20% payment will be done to contractor post issue of satisfactory certificate to the department post physical completion of the Project.Note:- Any clarification required by the bidder or pretender meeting will be invited, consultant has to attend the same. 8 NORMS & PROCEDURES(a) The structural drawings should be developed taking into consideration of seismic Zone relevant to the site.(b) The design of structures should take into consideration the soil properties for various structures determined after thorough soil investigations of the various sites.(c) Typical reinorcement details including bar bending details of all the structural members shall be provided as per IS 456:2000.(d) Design of structure should take into consideration appropriate wind loads releavant to the site.(e) The drawing will be prepared on A2 size, using standard drafting tools like Auto CAD and will be prepared based on Zonal Specifications/ guidelines and as per mutual disucssionsPricing shall be based on SSR-2020, Wherever rates are not available on SSR 2020 market rates shall be applied duly supported with quotation & market analysis. 9 DATA/INFORMATION SUPPLIED BY THE CLIENTS(i) All available details of sewage disposal system, sewage pipeline network and DPR by Urban Local bodies for Civil STP (being planned for Leh City) for efficient integration.(ii) Site layout plan of complete area and other data like population chart, cable routes, water supply lines, etc. required for design the system will be supplied by client. We will submit our requirement for details in advance.One nominated officer for providing necessary ground information about site of work and to provide necessary approvals/passes wherever required, being security areas.

INR 1000 /-

INR 55 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB