Tender For Work Of Making Kitchen Cabinets In Residence Number-33 Located At Mla Residence-4, Royal Hotel, Work Of Replacing Damaged Door Frames And Doors Of The House And Termite Treatment Work -Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking with in50 metres lead Of area beyond 3 sq. metres DAR NO-15.12.2 2 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below DAR NO-15.13.1 3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm DAR NO-15.23.1 4 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(dar-11.38) 5 Providing wood work in frame of door , window , clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs orwith dash fastener of requried dia & length (hold fast lugs or dash shalle be paid for separately).(dar-9.1.1) 6 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge(14.2.1) door 7 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge DSR NO-17.81 8 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: of size 580x440 mm 17.1.1 9 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) 10 Disposal of moorum/building rubbish/malba/similar unserviceable, dismantled or waste material by mechanical transport as per directions of Engineer-in-charge DSR NO1.1.18 11 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter:30mm thick including isi marked stainless steelbutt hinges with necessary --9.21.2 12 Fly proof stainless steel grade 304 wire gauge with 0.50 mm dia wire and 1.4 mm wide aperture with matching wood beading (9.7.8) 13 Providing and fixing ofkitchen shelves/cabinet with basket, shutter is made by 18 mm HDHMR board and back side of box is made by 8 mm HDHMR Borad . Length and width of cabinet is 50 cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work.(As per attached drawing) 14 Plain Basket 19x20x4 Rate-2268/1.18=1915.25 15 Plain Basket 19x20x6 Rate-2688/1.18=2261.02 16 Plain Basket 19x20x8 Rate-3120/1.18=2644.07 17 Providing and fixing ofkitchen cubboradshutter is made by mica laminated 18 mm HDMHR board and back side of box is made by 8 mm HDHMR . Length and width of cabinet is 30 cm and depth/height of cabinet is 60 cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work.(As per attached drawing) 18 Providing and fixing of Almirah Frame Work with 18 mm HDMHR board & mica laminated 18 mm HDMHR board with one side decorative lamination . including cost of all acessories such as SS handle, hinges etc complete work.(As per attached drawing) 19 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required::In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (10.25.2) 20 Providing & fixingMS Welded mesh jalli with 25x5 mm flat iron includung suply of all maiterial labour T&P etc complete aperture on both sides 21 Treatment of soil under exsting floors using chemical emulsion @ one liter per hole , 300mm apart including drilling 12 mm diameter holes and plugging with cementmortar 1:2(1 cement:2 coarse sand ) to match the existing floor with chlopyriphos/ Lindane E.C 20 % with 1% concentration(dar-2.35.3) 22 Brick work with common burnt clay (non madular) brick of class- 150 in superstructure above plinth level up to floor V level in all shape and sizes in cement mortar 1:4 ::(1 cement :4 coarse sand )( Dar 6.4.1) 23 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:-1:1.5:4 (1 cement :1.5 coasre sand ( Zone-III) :4 graded stone aggregate 20 mm nominal size (4.1.2) 24 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. DAR NO-5.22A.6 25 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble DAR NO-8.2.1 26 Providing and fixing SWR pipes as per 15:13592 110 mm dia for drain & sewer system with trenching , refilling & testing of joint complete including all fitting , labour and T&P etc .
