MLA Niwas-6, Park Road, house no.-F-2, as a result of change in practice, replacement of damaged window/door, replacement of damaged fittings of bathroom and kitchen, installation of doors in cupboards, flooring in the house premises, painting of external parts and other necessary various repair works. - Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws.DSR N0-9.21.2, 2 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15 mm nominal bore DSR No. 18.53.1 3 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore DSR No. 18.51.1 4 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.complete.15 mm nominal bore DSR No. 18.52.1 5 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter. DSR 18.22.2, 6 Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thickhard board groung fixed to wooden cleats with C.P. brass screws and washers complete.17.31, 7 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR No.18.49.1 8 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A, 9 Providingandfixing600x120x5mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. DSR 17.33, 10 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. DSR 18.65, 11 Supply and Fixing of C.P. Jali 125 mm. 12 Supply and Fixing of PVCNahani Trep, 13 Providing and fixing wash besin with C.I. brackets, 15 mm C.P. pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash BesinSize 630x450 mm with a pair of 15 mm C.P. brass pillar tap. DSR No. 17.7.1 14 Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings. DSR No. 17.8 15 Providingandfixingfloormounted,whitevitreouschinasinglepiece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10litrewithdualflushingsystem,includingallfittingsandfixtureswith seatcover,cisternfittings,nuts,boltsandgasketetcincludingmaking connectionwiththeexistingP/Strap,completeinallrespectasper directions of Engineer-in-Charge. 17.81, 16 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 225 mm. DSR No. 17.10.1.2, 17 Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes,shelves, racks,almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. DSR No. 9.169 18 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS:1068 and fixing with necessary screws etc., complete. Overall width 35 mm (9.61.1) 19 Providing and laying in Position Cement Concrete of Specified Grade excluding the cost of Centering and shuttering all work up to plinth level 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) 10 graded Stone 40 mm nomical size Derived from natural Sources ) DSR N0-4.1.10, 20 12 mm. Thick plaster with cement mortar in proportion of 1:4 cement & coarse sand DSR No- 13.4.1, 21 Removing white or colour wash by scrapping andsand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR N0 13.88, 22 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. DSR N0-13.80 23 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @1.43 ltr/10sqm) over existing cement paint surface (apex Ultima, weather coat All guard). (DSR N0. 13.112.1), 24 Paintingwith synthetic enamal paint of approved brand and manufactorar of required colour to give an evan shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR No. 13.62.1
