|
| 1 | Dismantling old plaster or skirting raking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead, including cost of materials, transportation charges of all materials to work site, all labour charges, cost of minor tools etc., complete. The rate is inclusive of consumable items and GST. |
| 2 | Dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres leadas directed by EIC all labour charges, cost of minor tools etc., complete For thickness of tiles 10 mm to 25 mm.The rate is inclusive of all consumable items and GST. |
| 3 | Providing and laying 1st quality Vitrified floor of size (600 x 600mm), thickness to be specified by the manufacturer) confirming to is 13753 of approved make like Nitco, Orient, Somany, Kajaria, or equivalent make, laid on 20mm thick bed of cement mortar 1:3 (1Cement, 3mainland river sand) including pointing the joint with white cement and matching pigment etc., complete including cost of cement (OPC Gr- 43, IS 8112:1989), river sand from mainland, transportation charges of all materials to work site, all labour charges, cost of minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 4 | Providing and laying Ceramic glazed Anti- skid floor tiles of size 300x300 mm (thickness to be specified by manufacturer), of 1st quality conformingto I.S. 15622, of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 mainland river sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement & matching pigments etc. complete, including cost of all materials, transportation charges of all materials to work site, all labour charges, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 5 | Plastering with Cement mortar 1:4 (1 cement and 4Mainland River sand) for 12 mm thick over sump and hollow block wall, exposed concrete surface etc, including cost of cement, river sand, screening and washing of the all sand, all charges, curing, transportation charges of all materials to work site and minor tools etc complete.The rate is inclusive of consumable item andGST. |
| 6 | Distempering with 1st quality acrylic distember (Ready mix) on Old work (Two coats) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade, including cost of all materials, labour charges,transportation of all materials to work site and minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 7 | Wall painting two coats with more coats on old work with plastic emulsion paint of approved brand and manufacture to give an even shade over the cement surface, including cost of paint, all other materials, labour charges, transportation charges of all materials to work site and cost of minor tools etc. complete.The rate is inclusive of all consumable items and GST. |
| 8 | Painting with synthetic enamel paint over the pipes, ladder, truss etc., including cost of paint, brush, all other materials, scaffolding charges, transportation charges of all materials to worksite, minor tools etc., complete. The rate is inclusive of consumable items and GST. |
| 9 | Taking out doors, window, ventilators and clerestory window shutters (steel or wood) including stackingwithin 50 meters lead, including cost of all labour charges minor tools etc., complete. The rate is inclusive of consumable item andGST. |
| 10 | Providing wood work (superior hardwood Cat-II A) in frames of doors, windows and clestory windows and other frames wrought framed and fixed in position including cost of timber, transportation charges to work site, all labour charges minor tools labour welfare cess etc., complete. The rate is inclusive of all consumable items and GST. |
| 11 | Providing and fixing panneled or panneled and glazed shutters for doors,windows and clestory windows including panelling, black enammeled Aluminium Butt Hinge 10 cm with necessary screws etc., complete .The rate is inclusiveof all consumable item and GST. 40 MM Thick SHW. |
| 12 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z Section and other section of approved make conforming to IS 733and IS 1285, fixing with dash fasteners of required dia and size, including necessary filled up the gaps at junction, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc., aluminium section shall be smooth, rust free straight , miltered and jointe mechanically wherever required includingcleat angle, aluminium snap beading for glazing/ paneling C.P.Brass/stainless steel screws, all complete as per architectural drawing and as per the direction of Engineer-In-Charge. Glazing, paneling anddash fastener to be paid for separately). For fixeedn portion, Anodised aluminium (anodised transparent or dyed to required shade accordingto IS 1868 (Minimum anodic coating of grade AC 15). The rate is inclusive of all consumable items and GST. |
| 13 | Providing and fixing Sliding Door Bolt Aluminium ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete including cost of materials, all labour charges, transportation charges ,minor tools etc. omplete. The rate is inclusive all Consumable items and GST. |
| 14 | Providing and fixing Aluminium tower bolt ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete including cost of materials, all labour charges, transportation charges ,minor tools etc. omplete. The rate is inclusive all Consumable items and GST.200 x 10 mm |
| 15 | Providing and fixing Aluminium Handle 100 mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete including cost of materials, all labour charges, transportation charges ,minor tools etc. complete. The rate is inclusive all consumable items and GST. |
| 16 | 12 mm thick PVC Pre-laminated particle board grade-I, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS: 3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type II marked: including cost of all materials, transportation charges, labour charges, minor tools etc, minor tools etc., complete. The rate is inclusive of all consumable items and GST. |
| 17 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. including cost oftransportation charges of all materials to worksite, all labour charges, Cost of minor tools etc., complete. The rate is inclusive of consumable items and GST. complete. |
| 18 | Providing and fixing Cabinet Mirror of superior glass of approved quality, including cost of all materials, all labour charges, transportation charges of all materials to work site and cost of minor tools etc complete. The rate is inclusiveof all consumable items and GST. |
| 19 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm, all labour charges, cost of all minor tools, etc., complete. The rate is inclusive of all consumable items and GST. |
| 20 | Providing and fixing P.V.C Waste pipe for wash basin including P.V.C Fittings complete (Semi rigid pipe),including cost of materials, all labour charges, transportaton charges of all materials to work site, minor tools etc complete, 32mm dia. The rate is inclusive of all consumable items and GST. |
