Tender For Construction Of Basket Ball Court And Volley Ball Courts At Aiims Raipur Hospital And Residential Complex.; 1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directedby Engineer-in- Charge: 2 All kinds of soil 3 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 4 All kinds of soil. 5 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinthlevel : 7 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) 8 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) 9 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 11 Thermo-Mechanically Treated bars of grade Fe-500D or more. 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 13 Cement mortar 1:6 (1 cement : 6 coarse sand 14 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 15 12 mm cement plaster of mix : 16 1:6 (1 cement: 6 coarse sand) 17 Finishing walls with Acrylic Smooth exterior paint of required shade : 18 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 19 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 20 Two or more coats on new work 21 Supplying and stacking at site. 22 Moorum 23 Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. 24 With medium setting bitumen emulsionOn W.B.M / W.M.M. @ 0.4kg/sqm 25 On bituminous surface @ 0.25kg/sqm 26 Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 27 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. 28 Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 29 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. 30 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. 31 Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade 32 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer- in-Charge. 33 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 34 Providing and Laying of 8 layered cushioned acrylic flooring surface having following layers:One layer of Primer Rivitex Liquid 1102 applied with sprayer or Brush.One layer of Elastosport resurfacer 853 for smoothening and repairing wet pour resurfacer for sports floor system.Two Layers of Super ELas Cushions course 853 for highly flexible, pasty, wet pour cushions rubber flooring for sports flooring system.Two layers of super elas cushions 842 for acrylic resins and special improves for waterproof concrete substrates or on elastosport 853.Two Layers of Cons Elas color851 for smooth and best quality slip resistant coating for sports floor system. Standard game line marking will be done by line marking color with elastomark 818.Approved Make to be used : KDF/Laykolt or equivalent 35 Providing and Installation of Tempered Acrylic Back Boards having length of 1800 mm, width if 1050 mm and thickness of 25 mm with Ring and Net. International standard like FIBAApproved make to be used: Koxtans or equivalent
