|
| 1 | Dismantling, clearing away and carefully stackingmaterials useful for re-use for any thickness of walls - Dismantling Plain Cement Concrete |
| 2 | Dismantling, clearing away and carefully stackingmaterials useful for re-use for any thickness of wall - Chipping of concrete and roughening the surface |
| 3 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 5 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 6 | Supplying and Erecting Pull and Push Type Rolling Shutterwith ISI make of approved size and section using 18 GIsheet. The shutter shall be painted with one coat of redoxide primer and the rate is inclusive of hood covers,transportation charges etc - Barbed Wire - 10 Gauge - Two Ply and Four Pronged(Galvanised) |
| 7 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with M Sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of M Sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers |
| 8 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 9 | Flooring with followingAnti skid colouredceramic tiles of size 200 x 200 x 6 mm laid over 10 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 10 | Brick work in CM 1:5 (one cement & five sand) using II nd class ground moulded bricks of size 9\"X43/8\"X 2 3/4\" including finishing, curing,etc., complete complying with standard specification |
| 11 | Plastering with cement mortar (1:3) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 12 | Supplying and fixing of Cuddaph slab 50 mm thickincludingcost and conveyance of all materials etc., complete and labour charges for moulding curing and fixing in position etc. complete as directed by the departmental officer. |
| 13 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 14 | Supplying and fixing steel door doublemade out of 18 gaugeM.S. sheet outer frame of 40mm x 40mm x 6mm \"L\" inner frame of 30mm x 30mm x 5mm \"L\" anglecross stiffener M.S. flat 25x6mm with aldrop 1 No tower bolts 4 Nos. two handle and six hold fast complete welded and revitted and painted one coat of rd oxide paintincludingcost and conveyance of all materials and labour etc., complete as per standard specification. |
| 15 | Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm thick with painting of suitable colour for open PVClight/fan point(For Electronic regulator) (5 pointsper coil). SD 22 |
| 16 | Supply and delivery 18W 4 Feet LED fitting with LED |
| 17 | Supply and fixing of G.I. pipes , PVC Pipessand specialsetc., complete as per standard specification. - 63 mm PVC pipe |
| 18 | 63 mm PVC Tee |
| 19 | 63mm Elbow |
| 20 | 63 mm PVC Coupling |
| 21 | 25mm PVC pipe |
| 22 | 25 mm coupling |
| 23 | Air pipe110 mm PVC pipe |
| 24 | Door inside Lock |
| 25 | Tap |
| 26 | Washbasin Hose |
| 27 | Washbasin Tap |
| 28 | Western tank |
| 29 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour,including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 30 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 31 | Provision for Goods and Service Tax @ 18% |
