Tender For Construction Of Boundary Wall And Pillars In Division-I. (Arc) 3402., Udaipur-Rajasthan

Tender For Construction Of Boundary Wall And Pillars In Division-I. (Arc) 3402.; 1.00 Item Code [2022 1.8 EW]:Item Type [building] :: Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils 703.13 CUM 178.00 125156.25 2.00 Item Code [2022 1.9.1]:Item Type [building] :: Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :Ordinary rock 421.88 CUM 268.00 113062.50 3.00 Item Code [2022 1.9.3]:Item Type [building] :: Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Hard rock(blasting prohibited) useful material 30% 187.50 CUM 551.00 103312.50 4.00 Item Code [2022 12.2.2 new]:Item Type [building] :: Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm 3000.00 Sqm 202.00 606000.00 5.00 Item Code [2022 12.40.1]:Item Type [building] :: Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect 3000.00 Sqm 80.00 240000.00 6.00 Item Code [2022 3.1.1 M20]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 60.00 CUM 4915.00 294900.00 7.00 Item Code [2022 3.1.6]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 135.00 CUM 3302.00 445770.00 8.00 Item Code [2022 3.16 Embankment]:Item Type [road] :: Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) 640.00 CUM 150.00 96000.00 9.00 Item Code [2022 3.16.3]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 350.00 Mtr 282.00 98700.00 10.00 Item Code [2022 3.7.1 new]:Item Type [building] :: Providing and laying damp-proof course with cement concrete grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification .50 mm thick. 337.50 Sqm 391.00 131962.50 11.00 Item Code [2022 4.1 new]:Item Type [building] :: Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 67.50 CUM 4934.00 333045.00 12.00 Item Code [2022 4.13.3]:Item Type [building] :: Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) 3500.00 Kg 77.00 269500.00 13.00 Item Code [2022 4.9 new]:Item Type [building] :: Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc 225.00 Sqm 157.00 35325.00 14.00 Item Code [2022 6.1.6 SM 1:6]:Item Type [building] :: Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 759.38 CUM 2838.00 2155106.25 PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) Percentage BoQ Tender Inviting Authority : Executive Engineer-I, UDA, Udaipur. Name of Work : Construction of Boundary Wall and Pillars in Division-I. (ARC) 3402 Contract No: Validate Print Help 15.00 Item Code [2022 6.2.4 SM Sup]:Item Type [building] :: Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement Mortar 1:4 ( 1- Cement : 4-Sand). 506.25 CUM 3824.00 1935900.00 16.00 Item Code [2022 9.8 new]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 2000.00 Kg 96.00 192000.00

Refer document

INR 73.91 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB