Tender For Provision Of Upgradation Of Nirman Hall And Toilet At Arc And Mc, Laitkor; 1 SCHEDULE ‘A’ PART-I (SCHEDULE OF B&R ITEMS) 2 Dismantling doorswindows and ventilator (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below. 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 4 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 5 Dismantling of IWC/ EWC/ Urinal incl flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 6 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 7 Providing and laying in position cement concrete ofgrade 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 8 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. 9 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directedby Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb incl filling concrete 1:2:4 in frame with formwork 10 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ attern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 11 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Including Glazing 4/5 mm thick as directed by EIC, paneling and dash fasteners as required and as per direction of EIC) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of Glass/ EPDM rubber / neoprene gasket required (All Fittings included as required and as per direction of EIC) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 12 Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets & curtain finial fixed with C.P. brass screws andPVC sleeves etc., wherever necessary complete : 25 mm dia 13 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood 14 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hingesand necessary screwsshall be paid separately) Second class teak wood 35 mm thick shutters 15 Providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick : Second class teak wood 16 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm 17 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm 18 Providing and fixing stainless steel sliding door bolts 300x16 mm, ISI marked with nuts and screws etc. complete. 19 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium/ wooden doors including necessary cutting and making good etc. complete. 20 Providing and fixing bright finished brass hanging type floor doorstopper with necessary screws, etc. complete. 21 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 22 Providing and laying Vitrified tiles in floor & wall in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size Size of Tile600 x 1200 mm 23 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead with cement mortar 1:4 (1 cement : 4 fine sand). 24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 25 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 26 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 27 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab upto 0.50 sqm 28 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets. 29 Providing and fixing 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. 30 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work 31 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Make- Parryware/ Jaguar/ Hindware/ Cera as approved by EIC. 32 Providing and fixing white vitreous china Half bowl type Wash Hand Basin size 550x400 mm and suitable depth with granite marble top (size of granite table top to be derected by EIC and paid saparetly), with all fittings and a pair of 15 mm C.P. brass basin mixure with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required. 33 Providing and fixing Health Faucet with 8mm dia, 1.20meter long flexible tube and wall hook etc complete. Make- Parryware/ Jaguar/ Hindware/ Cera as approved by EIC. 34 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality of 15mm nominal bore. Make- Parryware/ Hindware as approved by EIC. 35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality of 15mm nominal bore. 36 Providing and fixing C.P. brasslong nose bib cock / bib tap two in one of standard design and of approved make of 15 mm nominal bore. 37 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm. 38 Providing and fixing CP 600 mm long towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Make- Parryware/ Jaguar/ Hindware/ Cera as approved by EIC. 39 Providing and fixing CP liquid soap container of standard shape with bracket of the same materials with snap fittings of approved quality and colour 40 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 41 Providing and fixing CP grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating 42 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 43 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter 44 Providing and fixing on wall face unplasticised Rigid PVC water pipes 75 mm diameter, Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 45 Providing and fixing on wall face unplasticised Rigid PVC water pipes 110 mm diameter, Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 46 Providing and fixing on wall face unplasticised - PVC moulded Single tee with door 75x75x75 mm for unplasticised Rigid PVC water pipes Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 47 Providing and fixing on wall face unplasticised - PVC moulded Single tee with door 110x110x110 mm for unplasticised Rigid PVC water pipes Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 48 Providing and fixing on wall face unplasticised - PVC moulded 75 mm bend for unplasticised Rigid PVC water pipes Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 49 Providing and fixing on wall face unplasticised - PVC moulded 110 mm bend for unplasticised Rigid PVC water pipes Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 51 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 52 Providing and fixing uplasticised PVC connection pipe 15 mm nominal bore 45 cm length with brass unions. 53 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 54 Centering and shuttering including strutting, propping etc. and removal of form for beams, suspended floors, roofs landings, balconies, shelves, chajjas, lintels. 55 TMT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 56 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 57 Half brick masonry with common burnt clay F.P.S. (non modular) bricks with cement mortar 1:4 (1 cement :4 coarse sand) of class designation 7.5. 58 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 59 Providing&FixingofSoftFibreAcoustical Suspended Ceiling System Microlook EDGE TILES WITH15mm Exposed GRID.ThetilesshouldhaveHumidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, ColourBlack, Fire Performance UK Class 0 / Class 1 (BS 476 pt-6&7)inmodulesizeof600x600x 20mm,suitableforGreenBuilding application,withRecycledcontentof66% GW & 74% RW%.The tile shall be laid on grid of webheight 38 mmwith15mmwideT-sectionflanges colour white having rotary stitching on all T sectionsi.e. theMain Runner,1200 mm& 600mmCrossTeeswithawebheightof 38mmandaloadcarryingcapacityof14 Kgs/M2. The T Sections have a Galvanizing of90gramsperM2.TheTile&Grid systemusedtogethershouldcarrya15 year warranty.INSTALLATION:Tocomprisemainrunner spaced at 1200mm centres securely fixed to the structural soffit usingsuspension system(specificationsbelow)at1200mm maximumcentre.The suspension system at the end ofeach mainrunner shouldnot begreaterthan450mmfromtheadjacent wall.Flush fitting 1200mm long cross tees to be interlockedbetweenmainrunnersat 600mmcentretoform1200x600mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mmcross tees.Perimetertrimofwall angles are of size 3000x19x19mm, secured to walls at 450 mm maximum centres. 60 Providing and fixing Accostical fiber wall Panelling with Square edgemade of fiber glass substrate 25mm thick and wrappdon the front side with an accoustically transparent and fire resistant fabric with an option of colors as per the choice of Engr in Charge of size 1200x600mm providing a minimum sound absorption level of 0.90 NRC to be fixed to wall using Impaler and Construction adhesives incl necy wooden frame work with seasoned wood and chemically treated and all work shall be executed as per direction of EIC. 61 Providing and fixing Accostical fiber wall Panelling with Square edgemade of fiber glass substrate 25mm thick and wrappdon the front side with an accoustically transparent and fire resistant fabric with an option of colors as per the choice of Engr in Charge of size 1200*600mm providing a minimum sound absorption level of 0.90 NRC to be fixed to wall using Impaler and Construction adhesives. 62 Providing and laying BroadloomCarpets of Milliken /Unitex /Wellspun or equivalent, Nylon 6.6,Infinity Tufted,PrecisionMulti-levelPatternedCut Pile,manufacturedusingDigitalInjection Dyeing Process, width of min,12 with protective treatment StainSmart(Stain Repel/Stainresist/StainRelease),Anti Microbial Alphasan, Stiches/Rows 12.1/ inch, Guage 1/12 (50.4/10 cm),Tufts 145.2/ sq inch, Average Density of 5500 oz/cu. yd., Min.Pilethickness6.8mm, Effective Face Weight of 32 oz/sq. yds,flammability >= 0.45 (class1), Appearance Retention Rating (CRI 101) of Severe use. LEED Environmentally preferable, CRI Green Label plus certificate 5Y, Green Label Plus for indoor air quality (CA1350 or Equivalent),ANSI/ NSF 140- 2007 Gold ranking, manufacturer to be independently certified Carbon Neutral Manufacturer and SMaRT (R)Certified,including fixing with GreenAdhesivecompleteasperdrawing and directions of Engineer-In-Charge. 63 Providing and fixing Phenolbonded Bamboowod wall panelling with planks of 15 mm thick completeasperspecsfor stage area at façade of Stage 64 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet 65 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 66 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) 67 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Barge board (Upto 300 mm) 68 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter (600 mm over all girth) 69 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes 70 SCHEDULE ‘A’ PART-II (SCHEDULE OF E&M ITEMS) 71 M&L for Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in conceled/ surface / recessed PVC conduit or Caping-N-Casingwith and includingmodular switch, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required all as specified and directed(Group C) 72 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required 73 Supplying and fixing of 5/6 amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc 74 15/16 Amp switch 75 3/5 Pin 5/6 Amp socket out let 76 6 Pin 15/16 Amp socket outlet. 77 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 78 Supplying and fixing fowlloing size/ modules GI box along with modules base & cover plate for modular swithes in recessetc as requied. (a) 1 or 2 module (75mmx75mm) 79 (b) 3 modules (100mmx75mm) 80 (c) 4 modules (125mmx75mm) 81 (d) 6 modules (200mmx75mm) 82 (e) 8 modules (125mmx125mm) 83 (e) 12 modules (200mmx150mm) 84 Supplying and fixing 3 pin 5amp ceiling rose on the existing junction box/ etc as requied . 85 Earthing with GI earth plate 600mmx600mmx3mm thick including accessorise and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcal/ coke and salt as requied. 86 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required 87 Supplying and fixingPVCbatten / angle holder incl connection as reqd complete all as specified and directed 88 Supplying and fixing following way single pole and neutral, sheet steel MCB distribution board 240 valts on surface/recess complete, with tinned copper bus bar, neutral bus bar, earth bar, din bar,inter connection , powder pointed including earthing etc as requied (But with out MCB/RCCB/Isolater)(a) 6 way double door 89 (b) 8 Way double door 90 (c) 12 Way double door 91 S&F in replacement of MCB C Curve type, 10 kA, 5 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. 92 All as above item in before but of 32amps capacity andSPN type. 93 Supplying and fixing 40A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 94 Supplying and fixing 63A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 95 Supplying and fixingof following ways surface/recess mounting,verticle type 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of200 Amp tinned copper busbar,common neutral link,earth bar, din ba for mounting MCBs and incomer) as requird.(Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.). 4Way(4 + 12) double door 96 Supply and fixing of rating four pole, 415 volts, isolator in the existing MCBDB complete with connections, testing and commissioning etc as reqd but of 100 amps capacity 97 Wiring for circuit/ submain wiring along earth wire with the 1x1.5 sq mm+1x1.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed.. 98 Wiring for circuit/ submain wiring along earth wire with the 2x2.5 sq mm+1x2.5 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed.. 99 Wiring for circuit/ submain wiring along earth wire with the 2x6 sq mm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed. 100 Wiring for circuit/ submain wiring along earth wire with the 2x10 sq mm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor, single core cable in casing caping as requed. 101 Supply only LED Panel Light 2x2, 42 Watts(WW) 6000Kwith IP40 protection which suites various ceiling types complate all as directed by the Engr-in-Charge. 102 Supply only JETA LEGANZA energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP 66 flood light, suitable for highlighting architectural facade and general purpose lighting LED Flood Lights 200 Watts (White,WW & Green Colour). Make : Havells /CG/Wipro/Bajaj/Philips/Havlock 103 Supply only LUMILINE NEO batten basic all purpose surface and wall mounted LED batten 20 Watts with polycarbonate housing & integrated electronic driver. 104 Fixing onlypre-wired light fittings of any type flurecent/compact fluoverscent fittingwith all accessorieson ceiling/wall including connetion with 1.5 sqmm FRLS PVC insulated, copper inductor, single core cable and earthing etc as rwquied all as specified and directed. 105 Fixing onlyExhaustfan of any sweep/typeincuding making all electric connections complete all as specified anddirected. 106 Supply only Exhaust Fan Steel Body 300mm sweep Heavy Duty 900RPM 107 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 108 Supply only Efficiencia BLDC(Brushless Direct Current) power saver Ceiling fan 1200 mm sweep with remote complete all as directed by Engr-in-Charge. 109 SCHEDULE ‘A’ PART-IV (SCHEDULE OF CREDIT) 110 SCHEDULE ‘A’ PART-I (B&R)Wooden Door (Rate should be quoted Rs 300.00 per Sqm or more) 111 Wooden Window (Rate should be quoted Rs 1000.00 per Nos or more) 112 Wooden vent (Rate should be quoted Rs 750 per Nos or more) 113 PVC Door(Rate should be quoted Rs 350 per Nos or more) 114 Broken bricks(Rate should be quoted Rs 2 per Nos or more) 115 Indian type water closet (Rate should be quoted Rs 240 per Nos or more) 116 Wash basin(Rate should be quoted Rs 250 per Nos or more) 117 Looking Mirror(Rate should be quoted Rs 100 per Nos or more) 118 Glass shelf(Rate should be quoted Rs 125 per Nos or more) 119 PVC pipe 110 mm dia(Rate should be quoted Rs 50 per RM or more) 120 PVC pipe 75 mm dia(Rate should be quoted Rs 15 per RM or more) 121 15 dia GI pipe(Rate should be quoted Rs 40 per RM or more) 122 Angle valve(Rate should be quoted Rs 90 per Nos or more) 123 Pillar cock(Rate should be quoted Rs 130 per Nos or more) 124 Old CGI Sheet(Rate should be quoted Rs 10 per Kgs or more) 125 Wooden bottom(Rate should be quoted Rs 75 per Cuft or more) 126 SCHEDULE ‘A’ PART-II (E&M)Old U/S point wiring including switches (Rate should be quoted Rs 10 per point or more) 127 Old unserviceable earthing materialsof any size/capacity(Rate should be quoted Rs 65 each or more) 128 Old unserviceable Distrubution Board of any size/capacity(Rate should be quoted Rs 25 each or more) 129 Old unserviceable MCBsof any size/capacity(Rate should be quoted Rs 5 each or more) 130 Old unserviceable light fittingof any size/capacity(Rate should be quoted Rs 5 each or more) 131 Old unserviceable Sub Main wiring of any size/capacity(Rate should be quoted Rs 12 per RM or more)
