|
| 1 | Demolition of plain cement concrete (un-reinforced) in ground floors, pavings and in foundations not exceeding 15cm thickness (below or above ground level) including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement morar bedding, removing serviceable tiles to store and rubbish off the permises complete all as spd and as directed by Engr-in-Charge. |
| 3 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (suqare/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge. |
| 4 | M&L for joint free matt finished rectified ceramic coloured tiles 7 to 8mm thick (suqare/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge. |
| 5 | M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as spd and as directed by Engr-in-Charge. |
| 6 | All as per srl item No-5 above but on skirting and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Glazed ceramic coloured tiles 450x350 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles,laid over and including 10mm thick screed in cement mortar in cement mortar 1:4all as specified and directed. |
| 8 | M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in flooring below floor tiles etc. all as specified and directed. |
| 9 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. |
| 10 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 11 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc., fixed with L- type, J -type or cranked hook bolts all as specified |
| 12 | M&L for 6 mm thick Asbestos cement, serrated ridge forcorrugated or semi corrugated sheets fixed with L- type, J -type or cranked hook bolts all as specified all as specified |
| 13 | M&L for Brickwork with sub-class `B\" old sizebricks, straight or curved on plan exceeding 6m meand radius in half brick thick walls built in cement mortar 1:6 all as specified and directed. |
| 14 | Taking down cementor cement lime plaster, any description, on brick walls including racking out joints hacking for keyscrubbing down with water etc. all as specified and directed. |
| 15 | M&L for rendering 5mm thick on fair faces ofconcrete surfaces in cement mortar 1:3in ceiling surface finished even and smooth with out using extra cement all as specified and directed. |
| 16 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement all as specified and directed. |
| 17 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 mixed with WPC as per manufacturer\"s instructions, surfaces finished fair and even complete all as specified and directed. (Note : Supply of water proofing compound shall be measured and paid seperately). |
| 18 | Supply only of integral water proofing compound of approved make complete all as specified and directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of colour wash over a coat of white wash complete all as spd and as directed. |
| 20 | M&L for preparation of newly plastered surfaces of walls andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and directed. |
| 21 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed. |
| 22 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed. |
| 23 | M&LHardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for providing 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in plinth protection with mastic filling in joints, ramp etc, complete all as specified and directed by Engr-in-Charge. |
| 25 | Supplying and applying two component elastometic acrylic polymer modified cementious waterproofing coating, SmartCare Damp Block 2K Supremo of approved equivalent,having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, applying SmartCare Damp Block 2K Supremo in two coat 2 kg/sqm consumption, the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc complete as per manufacturers specifications. |