Tender For Repair Of Wooden And Steel Furniture Under Ge P No 1 Jabalpur; 1 Steel Furniture 2 Repair of Almirah large Steel with shelves(FD-67(M)/1031 as appended below :Removing of existing u/s fitting/fixtures of Almirah large steel 1mm thick CRCA sheet andrefixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All completespecified shown on drawing and directed. 3 Leg 4 Locking device with cover (except MS rod & lock) 5 MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah 6 Chromium plate handle 7 MS Butt hinges of size 75mm 8 Lock 6 lever with duplicate key Make:- Godrej / Harrison / Link 9 MS cleats & pin or welding 10 Shelves 11 Shutter 12 Repair of Almirah Medium Steel with shelves (FD-67(M)/1032 as appended below : Removing of existing u/s fitting/fixtures of Almirah med steel andrefixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL 13 Leg 14 Locking device with Cover (except MS rod & lock) 15 MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah 16 Chromium plate handle 17 MS hinges of size 75mm 18 Lock 6 lever with duplicate key Make:- Godrej / Harrison / Link 19 MS cleats & pin or welding 20 Shelves 21 Shutter 22 Repair of Almirah Medium Steel 1/2H 1/2Sh Shelves (FD-1033) as appended below :Removing of existing u/s fitting/fixtures of Almirah andrefixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. Make of 1mm thick CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco 23 Leg 24 Locking device with Cover (except MS rod & lock) 25 MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah 26 Chromium plate handle 27 MS hinges of size 75mm 28 Lock 6 lever with duplicate key Make:- Godrej / Harrison / Link 29 MS cleats & pin or welding 30 Shelves 31 Shutter 32 CP Hanging Rod with brackets 33 Repair of Book case steel FD-1028/TP as appended below : Removing of existing u/s fitting / fixtures of Book case steeland refixing / welding with new items and minor repair applying two coatss of Synthetic enamel paint over a coat of red oxide, All complete specified shown on drawing and directed. 34 Shelf MS sheet 1 mm thick 35 Glass pane 5 mm thickof shutter 36 Lock 6 lever with duplicate keys 37 Steel Handle 100 mm long 38 Complete base of Mild steel sheet 39 Adjustment of shutter to easy functioning with necessary denting/ Welding to frame wherever required 40 Repairs to Chair CB(Tubular) Steel with arms FD-75(M) (Chair CBA) for the following :- Removing old u/sfitting /Fixture of Chair CBA steel and supply and fixing new items as lsted below andapplying two coats of synthetic enamelpaint over a coat of red oxide primer all complete specified shown on drawing and directed. 41 Removing old existing seat and Supply & fix complete Seat of 50 mm thick synthetic foam of 32 density made to shape for seat over 12 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour,taxture and quality. 42 Removingold existing back and Supply & Fix Complete Back of50 mm thick synthetic foam of 32 density made to shape for back over 12 mm thick BWR grade plywoodandshall be stitched with superior quality rexine cloth of approved colour, taxture and quality. 43 Supply & Fix 10 mm thick synthetic foam of 32 density made to shape for wooden handleandshall be stitched with superior quality rexine cloth of approved colour, taxture and quality. 44 Supply & Fix flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair 45 Welding to frames wherever required at cracked/broken portion to make the chair propery fixed to bear the design load and any nos of joints to welded in a single chair including painting and complete as directed. 46 Supply & Fix PVC cap 47 Supply & Fix PVC Stud with screw 48 Supply & Fix new suaitable size Seat of 1st class teakwood framed painted with suprior quality Black paint and canned in Godrej pattern fixed with new screws. 49 Supply & Fix new suaitable size Back of 1st class teakwood framed painted with suprior quality Black paint and canned in Godrej pattern fixed with new screws. 50 Supply & Fix new arms of 1st class teakwood painted with suprior quality Black paint fixed with new screws and washer. 51 Repairs to Chair CB(Tubular) Steel without arms FD-75(M(Chair CBA) for the following :- 52 Removingold existing seat andSupply & Fix Complete Seat of 50 mm thick synthetic foam of 32 density made to shape for seat over 12 mm thick BWR grade plywoodandshall be stitched with superior quality rexine cloth of approved colour, taxture and quality. 53 Removingold existing back and Supply & Fix Complete Back of50 mm thick synthetic foam of 32 density made to shape for back over 12 mm thick BWR grade plywoodandshall be stitched with superior quality rexine cloth of approved colour, taxture and quality. 54 Supply & Fix flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair as directed by GEof required size complete. 55 Welding to frames wherever required at cracked/broken portion to make the chair propery fixed to bear the design load and any nos of joints to welded in a single chair including painting of 02 coats and complete as directed. 56 Supply & Fix PVC cap 57 Supply & Fix PVC Stud with screw 58 Supply & Fix new suaitable size Seat of 1st class teakwood framed painted with suprior quality Black paint and canned in Godrej pattern fixed with new screws. 59 Supply & Fix new suaitable size Back of 1st class teakwood framed painted with suprior quality Black paint and canned in Godrej pattern fixed with new screws. 60 Repairs to Chair Varandah FD-256 for the following:- 61 Removing of old usnsv cane from Chair Varandah and prepare the conduit structure for painting by scrapping the old surfaceby grinder and painting with white synthetic enamal paint over a coat of white primer complete as directed. 62 Weaving the seat, back and Handle of Chair Varandah in Godrej pattern with 4 mm wide approved quality cane on steel surface of chair complete all as specified and as directed. 63 Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new PVC/ rubber shoe best quality in the same position as directed. 64 Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of jointsandpainted surface applying twocoat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed 65 Welding to frames wherever required at cracked/broken portion to make the chair propery fixed to bear the design load and any nos of joints to welded in a single chair and complete as directed. 66 Repairs to Chair Computer (Various Size) for the following :- Removing old u/sfitting /Fixture of Chair Computerand supply and fixing new items as below andcomplete specified shown on drawing and directed. 67 Complete Seat made of 9mm thick hot pressed plywood with lipping all around moulded polyurethene foam 50 mm32 densitymade to shape for shall be stitched with superior quality tapestry clothof approved colour, taxture and qualityand as per sample approved. 68 Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm32 densitymade to shape for shall be stitched with superior quality tapestry cloth (Not less thanof approved colour, taxture and qualityand as per sample approved. 69 Arms restof soft PVC superior quality complete 70 PVC BaseFive stare alongwithwheels 71 Revolvingwheels 72 Hydrolic System with assasarry (Air soft) 73 S&F Seat cover for seat andshall be stitched with superior quality tapestry clothof approved colour, taxture and quality. 74 S&Fback coverfor back andshall be stitched with superior quality tapestry clothof approved colour, taxture and quality . 75 Repairs to Chair Revolving Executive Med back (Various Size) for the following :- Removing old u/sfitting /Fixture of Chairand supply and fixing new items as below complete all as specified shown on drawing and directed. 76 Complete Seat made of 9 mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm32 densitymade to shape for shall be stitched with superior quality tapestry cloth/ rexine clothof approved colour, taxture and qualityand as per approved sample. 77 Complete Back made of 9mm thick hot prassed plywood with lipping all around moulded polyurethene foam 50 mm32 densitymade to shape for shall be stitched with superior quality tapestry cloth/ rexine cloth of approved colour, taxture and quality and as per approved sample. 78 Arms rest of black integral skin polyurethane reinforced with MS insert complete. 79 PVC BaseFive stare alongwithwheels 80 Revolvingwheels 81 Hydrolic System with assasarry (Air soft) 82 S&F Seat cover for seat andshall be stitched with superior quality tapestry clothtapestry cloth / rexine cloth of approved colour, taxture and quality. 83 S&Fback coverfor back andshall be stitched with superior quality tapestry clothtapestry cloth / rexine cloth of approved colour, taxture and quality. 84 Repairs to Charpoy GI Pipe for the following (FD-220/ 220 (R) :- 85 Taking out broken/ u/s long rails from Charpoy GI pipe and Supply and fixingnew long rails 1940 mm long duly threaded at both end out ofGI tube 32mm dia medium gradeall as spacified anddirected. 86 Taking out u/s shortrails from Charpoy GI pipe andmakingshort rails for GI charpoy made out of from broken long rails obtained from Charpoyincluding cutting & threading rails and fixing in replacementall as spacified anddirected. 87 Taking out u/s legs from Charpoy GI pipe andmakinglegs for GI charpoy made out of from broken short rails obtained from Charpoy including cutting & threading rails and fixing in replacementall as spacified anddirected. 88 Taking out u/s check nut from Charpoy and S&F newcheck nuts of 6 mmwide,32 mm dia. 89 Taking out u/s GI elbow from Charpoy and S&F newGI elbow 32mm mm dia. 90 Removing of old existing u/s newar from charpoy GI pipe , tightening theframeincluding welding whereever required and S&F new ply wood 12 mmthick BWR, ISI marked (size Approx 1950mm x 900mm) with6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified anddirected. 91 Removing of old existing u/s plytop from charpoy GI pipe , tightening theframeincluding welding whereever required and S&F new ply wood 12 mmthick BWR, ISI marked (size Approx 1950mm x 900mm) with6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified anddirected. 92 Supply and fixing Stiffener 02 Nos in each charpoy of 40 mm wide and6mmthick MS flat iron welded to GI Charpoy frame perpendicular to long rail of approprate size on equal distance duly applying two coats of black paint over a coat of red oxide,and 4 Nos ofMS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as spacified and directed. 93 Welding to frames wherever required at cracked/broken portion to make the charpoy propery fixed to bear the design load and any nos of joints to welded in a single chair and complete as directed. 94 Repair of Table office ClerksteelFD 84 (M) /1004 as appended below : Taking down existing U/S PL Board/steelfitting/fixtures of Table office Clerk Steel andrefixing/welding with new items as listed below and minor repair dully applying two coats of synthetic enamel paint over a coat of red oxide all complete specified shown on drawing and directed 95 Removing existing PL/Prelaminated MDF board top and S&F new top of 18 MM thick ISI marked 303 grade plywood shall be laminated with 1 mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm beadingall around the top 96 Lock 4 lever with duplicate key Make: Harison / Link / Godrej 97 Drawers Complete 98 Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required. 99 Supply & Fix PVC toe shoes 100 Welding to frame wherever required 101 Removingdents, bendswelding to broken portion rectifying all minor defects and repairs.Material and labour for preparation of new and old steel surface (inside & outside surface) including doors shelves and legs.Providing 1st class glossy finishsynthetic enamel spray paint (Colour approved by GE) obtaining optimum glossyfinish surfaceover a coat of red oxide primer wherever required .All complete specified shown on drawing and directed for following:- Make:- Asian / Berger / Jenson & Nicholson / Shalimar. 102 Almirah large Steel with shelves (FD-67(M)/1031 103 Almirah large Steel with shelves (FD-67(M)/1031 (Outside Only) 104 Almirah large Steel with shelves (FD-67(M)/1031 (In Dule tone colour approved by GE) 105 Almirah Midium Steel with shelves (FD-67(M)/1032 106 Almirah Midium Steel with shelves (FD-67(M)/1032 (Outside only) 107 Almirah Midium Steel with shelves (FD-67(M)/1032 (In Dule tone colour approved by GE) 108 Almirah large Steel 1/2 H 1/2 shelves (FD-1033) (In dule tone Colour approved by GE)) 109 Almirah large Steel1/2 H 1/2 shelves (FD-1033 (Outside Only) 110 Almirah Med Steel 1/2 H 1/2 shelves (FD-1034) (In dule tone Colour approved by GE)) 111 Almirah Med Steel1/2 H 1/2 shelves (FD-1034) (Outside Only) 112 Book case steel (Outside only) 113 Book case steel 114 Chair CB steel with arms FD-75(M) 115 Chair CB steel without arms FD-75(M) 116 Rack steel size 6 x 8 x3-2 117 Rack steel 6x3 (6 Tier) 118 Side rack with tray FD-97(M) 119 Table office Officer steel 120 Table office Clerk steel 121 Repairs to Bed hard Ply top for FD-246/247 the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Bed hard ply top without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 122 Leg 123 Long rail . 124 Short rail 125 Stiffener 126 Head board frame Complete 127 Foot board frame Complete 128 Veneer ply with beadingfor Head Board 129 Veneer ply with beading for footBoard 130 Pywood 12mm thick BWR exterior grade as per IS 303 and fix with screws as in top of bedMake:- Kitply /Greenply/National ply. 131 S&F triangle HW support for legs with rails of size 100 x 100x35mmmm with screw. 132 Repairs to Bin soiled linen largefor the following :-Removing old u/sfitting /Fixture of Bin soiled linen and fixing with new 9 mm plywood with 5 mm thick wooden beading wherever required all as directed and minor repair as per required applying two coats of French PolishAll complete specified shown on drawing and directed. (FD-224) 133 Top 134 Bottom 135 Legs with supporting rails 136 Front or Back side 137 Side 138 S&F Veneer(Teak wood Shed) for Top/ Front / back 139 S&F Veneer(Teak wood Shed) for side 140 Repairs to Chair WritingFD-280 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 141 Front leg 142 Rear leg 143 Front rail 144 Side/rear rail 145 Back rest (Back batten) 146 Arm rest 147 Side stiffener 148 Centre stiffener 149 Repairs to Chair Dining FD 228/279for the following:-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 150 Front leg 151 Rear leg 152 Front rail 153 Side rail 154 Rear rail 155 Back Batten 156 Side Stiffener 157 Centre Stiffener 158 Repairs to Chair Easy FD- 229 for the following:- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Easy without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 159 Front / Rear leg 160 Arm rest 161 Side rail of seat 162 Rear rail of seat 163 Front rail of seat 164 Side rail of back 165 Upper rail of back 166 Bottom rail of back 167 Bottom stiffener of Back 168 Bottom stiffener front 169 Repairs to Chair Easy Cushioned FD- 385 for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Easy Cushioned without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 170 Front / Rear leg 171 Arm restwith Cushioned 172 Side rail of seat 173 Rear rail of seat 174 Front rail of seat 175 Side rail of back 176 Upper rail of back 177 Bottom rail of back 178 Bottom stiffener of Back 179 Bottom stiffener front 180 Removing of old unsvCushion fromchairsand S&F new approved quality 75mm thick 40 density foam coverd with velvet/ tapestry cloth not less then 400/- per meteras size and shape of seat/ back existing chair all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) 181 Removing of old unsvCushion fromchairsand S&F new approved quality 75mm thick 40 density foam coverd with velvet/ tapestry cloth not less then 400/- per meter incl 12mm plywood as size and shape of seat/back existing chairas size and shape of seat existing chair all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop) 182 Repairs to Hat stand with mirror FD- 233/361 for the following:-Removing old u/s fitting/fixture of Hat stand with mirrorwithout disturbing to the other parts and supply and fixing with new items of best qualityand minor repair applying two coats of French PolishAll complete specified shown on drawing and directed. 183 Complete Base of 18 mm thickPrelaminated MDF Board with one side teak finish fixedwith 5mm thick timber beading around the edging. 184 Peg huck of 100mm long Brass/ Chromium plated metal. 185 Mirror 5- 5.5 mm thick electro copper plated mirror totally free from distortion with suitablen beading. 186 Repairs to Peg table FD- 236/384 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Peg Table without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 187 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 188 Legs 189 Long Rail 190 Short Rail 191 Side stiffener 192 Centre stiffener 193 Repairs to Stool Dressing CB FD- 282/252 for the following :- Dismantiling and taking out carefully the following unsv damage parts /fitting / fixture of Stool Dressing CB without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality,well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish allspecified shown on drawing and directed. 194 Legs 195 Long rails 196 Short rail 197 Stiffiners 198 Repairs to Side board FD- 241 for the following:- Removing old u/s fitting /fixture of side boardwithout disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading wherever required and minor repair applying two coats of French Polish all complete specified shown on drawing and directed. (FD-241) 199 Removing existing Pre-laminated board top and S & F new Top of 18/19mm thick Prelaminated MDF Board Exterior Grade, decorative choice alongwith 5mm thick , first class hard wood, weading. 200 Side of 18 mm Prelaminated MDF Board. 201 Backof 6 mm thick plywood BWR Grade. 202 Shutter made of 18mm Prelaminated MDF Boardwith piano type hinges and steel bow handle of 100 mm long SS finish superior quality. 203 Shelve made of 18mm Prelaminated MDF Board. 204 Drawersmade of 18mm Prelaminated MDF Board with one knob 25 mm. 205 S&F new addition wooden base frame to be provided with 925 mm long rail of size 25x40 mm both sides, 300 mm short rail of size 25x40 mm both side and 45x45 mm legs to each conersat 75 mm height as directed. 206 S&F new teakwood shaded knob 25mm dia 207 Legs of 1st class teak wood 208 S&F Veneer(Teak wood Shed) for Top 209 S&F Veneer(Teak wood Shed) for side 210 S&F Veneer(Teak wood Shed) for shutter 211 S&F Veneer(Teak wood Shed) for Drawer 212 Repairs to Sofa Chair (Single seater) FD- 281/373 for the following :-Dismantiling and taking out carefully the following UNSV damage parts /fitting / fixture of Sofa Chair (Single Seater) without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 213 Arm rest 214 Leg 215 Bottom and upper rails for seat &back frame 216 Side Rails forseat and back frame 217 Wooden Battens of Seat & Back 218 Wooden Bearers of Seat & Back 219 Supply &Fix New high density foam of size 530x560x100mm of density 40 duly coverred with tapestry cloth of approved quality and shown on drgs.Note - Tapastry cloth shall be of approved / good quality, shade and colour as approved by the Engr-in-Charge and rate shall not be less than Rs. 400/-meter). The unit rate quoted shall be deemed to include the cost of tapestry cloth.Make - Sleepwell / Kurlon, Dunlop) 220 Supply &Fix New,Tapastry cloth cover for foam of size 530x560x100mm. tapestry cloth of covershould be approved quality alonwithbest quality plastic Zip over Tapestry cloth complete aas approved by the Engr-in-Charge(Note - Tapastry cloth shall be ofshade and colour as approved by the Engr-in-Chargeand rate shall not be less than Rs. 400/-meter). 221 Repairs to Table Drassing Ladies FD- 251 for the following :-Removing old u/s fitting /Fixture of Table drassing Ladies without disturbing to the other parts and supply and fixing with new items and5mm thick wooden beading wherever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed. 222 Top of 18/19mm thick Prelaminated MDF board including teak wood edge all around, 223 Bottom of 18/19mm thick Prelaminated MDF Board including teak wood edgeall around 224 Side of 18/19mm thick Prelaminated MDF Board including teak wood edgeall around 225 Back of 12mm thick commercial ply 226 Drawer with Knob 25 mm 227 Sliding glass shutter 228 Legmade out of well seasoned first class hard wood, teak wood, including french polishing,glossy finish, 229 Long Rail made out of first class hard wood, teak wood 230 Short Railmade out of well seasoned first class hard wood, teak wood 231 Mirror 5.5mm thick, 355mm, 1220mm high 232 Mirror 5.5mm thick, 355mm, 1220mm high alongwith Complete frame 233 Repairs to Table 900 x 600 x 760 (Table 3x2) with and without Drawer ( Drg No.: FD- 224, 283, FD- 231, FD-284)for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 3x2 with and witout drawer without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 234 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 235 Leg 236 Long Rail 237 Side rail 238 Side Stiffener 239 Centre Stiffener 240 Bottom of Drawer 6mm thick commercial plywood. 241 Complete Drawer with25 mm knob 242 Teakwood sheded Knob for drawer 25mm 243 Repairs to Table 900x 900x760 (Table 3x3) (Drg No:- DB-4120/ FD-291 for the following :- Dismantiling and taking out carefully the followingunsv damage parts /fitting / fixture of Table 3x3 without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all specified shown on drawing . 244 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 245 Legs 246 Rails 247 Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw 248 Repairs to Table 600x600x760 (Table 2x2)Drg No:- FD-293 for the following :- Dismantiling and taking out carefully the followingunsv damage parts /fitting / fixture of Table 3x3 without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all specified shown on drawing . 249 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 250 Legs 251 Rails 252 Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw 253 Repairs to Table Dining 6 person FD-239, FD- 273 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 6 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 254 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 255 Legs 256 Long Rail 257 Short Rail 258 Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw 259 Repairs to Table 5x 2-10 FD-139 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 5 x2-10 without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 260 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 261 Legs 262 Long Rail 263 Short Rail 264 Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw 265 Repairs to Table 6x3-6 (FD-2054) for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 6x3-6without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 266 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 267 Legs 268 Long Rail 269 Short Rail 270 Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw 271 Repairs to Table Dining 8 personFD-239, FD- 273 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 8 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 272 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 273 Legs 274 Long Rail 275 Short Rail 276 Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw 277 Repairs to Table Office Clerk Wooden 1380x850x760mm Drg No:- DB-4120 for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Office Clerk Wooden without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 278 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 279 Leg 280 Long Rail 281 Short Rail 282 Short Stiffener 283 Long Stiffener 284 Bottom of drawer 6mm thick commercial plywood BWR type 285 Complete Drawer with25 mm knob 286 Teakwood sheded Knob for drawer 40mm 287 Repairs to Table Office Officer Wooden Drg No:- DB-4119for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Office Officer Wooden without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 288 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 289 Leg 290 Long Rail 291 Short Rail 292 Short Stiffener 293 Long Stiffener 294 Bottom of drawer 6mm thick commercial plywood BWR type 295 Complete Drawer with40 mm knob 296 Teakwood sheded Knob for drawer 40mm 297 Repairs to Table Writing FD-33(M), FD-275 for the following :-Dismantiling and taking out carefully the following unsv damage parts /fitting / fixture of Table Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish complete specified shown on drawing and directed. 298 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 299 Legs 300 Long Rail 301 Short Rail 302 Short Stiffener 303 Long Stiffiner 304 Side of Boxof 18/19 mm Pre laminated Particle Board 305 Bottom of box of 18/19 mm Pre laminated Particle Board 306 Shelveof box of 18/19 mm Pre laminated Particle Board 307 Shutter made of 18/19 mm Pre laminated Particle Boardwith piano type hinges and teakwood shad knob 25mm dia 308 Complete Drawer with25 mm knob 309 Back of box of 6mm plywood 310 Brass Lock for drawer with duplicate keys 311 Teakwood sheded Knob for drawer 35mm 312 Supply and fixing Veneer 1mm thick (Teak wood Shed) for shutter of Box 313 Supply and fixing Veneer 1mm thick (Teak wood Shed) for side of Box 314 Repairs to Teapoy FD-34(M), FD-232, FD - 278 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Teapoy without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 315 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 316 Legs 317 Long Rail 318 Short stiffener 319 Repairs to Table Centre FD- 235FD-274 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Centre without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 320 Removing existing PL/Prelaminated MDF board top and S&F new Top of 18 mm thick ISI marked 303 grade plywood shall be laminated with 1mm sunmica sheet (Colour and shed as approved by GE) alongwith 5mm Beadingall around the top 321 Legs 322 Long Rail 323 Short Rail 324 Short stiffener 325 bottom stiffener 326 Repairs to Table Bed side FD-248, FD-276 for the following :-Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Bed Side without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, 18/19mm thick Prelaminated particle board extirior grade lamination with 4 mm thick teak wood edging and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed. 327 Top 328 Bottom 329 Side 330 Slelve 331 Back of6mm thick plywood 332 Veneer(Teak wood Shed) for Top 333 Veneer(Teak wood Shed) for side 334 Removing of old PVC shoefrom various Type of Tables such as Table Writing, table 3x2 with /witout drawer,Table 3x3 , table 2x2 Table office Clerk, table dining 4/6/8 person, Sofa etc. and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified and as directed. 335 Removing of old PVC shoefrom various Type of Chairs such as Chair dining, Chair Writing, Chair Easy, Chair WB,Chaier CBetc. and replacing the same with new 20 mm dia and 10 mm high be screwed to bottom of legs all as specified an das directed. 336 Material & Labour for preparing & polishing of new or old wooden and wood based materials of any description and of any lenghth and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved All as specified inparticular specifications and as shown on drawing and as directed by EIC for the following wooden furniture:- 337 Almirah Large with Shelve 338 Almirah Med with Shelve 339 BedHard Ply Wood Top 340 Book Case 341 Bin Soil Linen 342 Chair dining 343 Chair Easy 344 Chair EasyCushioned 345 Chair wooden bottom with out Arm 346 Chair Writing 347 Hat stand w/miror 348 Peg table 349 Tray for table3/4 spaces 350 Side board 351 Stool dressing CB 352 Table office clerk ( Drg No. :-DB-4120 ) 353 Table office Officer 354 Table Centre 355 Recanning of Various Type of Chairs FD-252/244/ 250, 228,229 ,279 & 280 Removing of old cane from various chairs such as Chair dining, chair writing, chair easy,chair CB office , chair Tubular Steel,stool dressing CB etc.and replacing the same with new 2mm wide half round (oval shape) white plastic cane,weaving,in Godrej pattern with 4mm wide for side borderall as specified.(Make:Maharashtra Cane/shah/premier) 356 Schedule of credit of amount Rs. 44,313.25 to be deducted during AOC.
