Tender For Road Signage Work On Rampur Shahbad Road To Shiv Vihar Road. - Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Appl, rampur-Uttar Pradesh

Tender For Road Signage Work On Rampur Shahbad Road To Shiv Vihar Road. - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 2 Cat Eyes (raised pavement marker).Supply & fixing of moulded cats eye without shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type H and complying to specification of categories a of MORTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufactures recmmendation including site clearence etc. and complete as per direction by E/I. 3 The solar cateye shall be produced from an engineered polymer selected for superior impact resistance and weather ability. The top the marker should be transparent for solar charging and light output in active mode. The bas of the body shall be yellow or neutral white as approved by engineer incharge. The marker shall incorporate a solar panel for converting the solar energy into electricity, a storage device for storing the energy LEDs for illumination and a design for providing 360 degree uniform smooth illumination through light tube . The marker shall also have high reflective plastic lenses conspicuity in passive mode and dual shanks for improved road presence. these marker are intended for application directly on to pavement surfaces and shall be applied with epoxy resin adhesivedesigned for use with raised pavement markers and as supplied by the marker manufacturer separately. the solar cateye shall be of height 65+_ 2mm and maximum diameter 136 +_4mm and complete as per direction by E/I. 4 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly design foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 5 90 Cm. Equilateral Triangle. 6 90 Cm. Circular. 7 80 Cm. x 60 Cm. Rectangular

INR 766 /-

INR 7 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB