Supply Of Certain Carrying, Return, Impact Idlers And Frames For Coal Handling Plant, , Carrying Roller : Material :Erw Pipe Heavy Duty , Shaft Material : En-8 , Bearing Number : 420206 , Model : Skf /Fag. The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150 (Sh.0 2 Of 10),Self Alignment Carrying Idler Frame : Material : Ms , The Size Of The Fillet Weld (Leg Length) For Idler Frame Shall Be 6 Mm, The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh.05 Of 10),Carrying Guide Roller : Shaft Material : 40C8/En8, Bearing : 420204 , Material : Ms, The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh. 05 Of 10),Flat Return Idler For 1400Mm Belt Width : Material : Erw Pipe Heavy Duty Without Negative Tolerance Is : 9295 , Gr. Yst : 210 Mpa , Shaft Material : En-8 , Bearing Number : 420206 , Model : Skf /Fag, The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh. 04 Of 10),Return Guide Roller : Shaft Material : 40C8/En8, Bearing : 420204 , Material : Ms, The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh. 06 Of 10),Return Self Alignment Frame : Material : Ms , The Size Of The Fillet Weld (Leg Length) For Idler Frame Shall Be 6 Mm, The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh. 06 Of 10),Impact Idler Roller 190/139.7Mm X Length 530Mm X 6.3Mm Minimum Thickness,Shaft 35Mm X Length 562Mm X Shaft Ends 28Mm Flat,Self-Cleaning Return Idler : Material : Erw Pipe Heavy Duty Without Negative Tolerance Is : 9295 , Gr. Yst : 210 Mpa , Shaft Material : En-8 , Bearing Number : 420206 , Model : Skf /Fag , Rubber Disc Shore Hardness (65-70 Degrees) The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150(Sh.08 Of 10),Garland Impact Idler For Travelling Tipper : Material : Erw Pipe Heavy Duty , Shaft Material : En-8 , Bearing Number : 6307 , Model : Skf /Fag , The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga- 5150 (Sh. 01 Of 01),Eye Bolt For Garland Idler : Spindle Material : Is : 2062 , The Measurements Are As Per Apgenco/Eic Drg No. Tpl-1044-32140-Vm-Ga-5150 (Sh. 01 Of 01)
