|
| 1 | M & L RCC 1:1½ :3, (nominal mix), Type A-1 using 20mm graded stone aggregates for columns, pillars, piers, posts and struts all as specified and directed by Engineer - in - Charge . |
| 2 | M&L Brick work with sub class \"B\" old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge . |
| 3 | M & L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete all as specified and directed by Engineer - in - Charge. |
| 4 | M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete all as specified and directed by Engineer - in - Charge. |
| 5 | M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge . |
| 6 | M & L mild steel TMT bars 8mm diacut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge . |
| 7 | S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge. |
| 8 | Demolitionofstone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortaretc.all as specified and directed by Engineer - in - Charge . |
| 9 | M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge . |
| 10 | Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge. |
| 11 | M & L for designer glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 12 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over 2mm thick water proof putty over plastered or unplastered or concrete surfaces including preparation of new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over 2mm thick water proof putty over plastered or unplastered or concrete surfaces including preparation of surfaces by removal of existing treatment complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M & L rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 15 | Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge. |
| 16 | M & L providing two coats of synthetic enamel paintand a coat of red oxide primer onnewsteel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge . |
| 17 | M & L applying two coat of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge |
| 18 | M & L two coats of cement paint over a coat of primer on plastered wall surfaces including preparation of surface after complete removal of existing treatment complete all as specified and directed by Engineer - in - Charge . |
| 19 | M&L for cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothing for and bonding new work in mortar into old work, including new materials entering into old wall using type B1 (!:2:4) using 20 mm graded stone aggregates complete all as specified and directed by Engineer-in-Charge. |
| 20 | Dismantling wrought iron or mild steel work of any description all as specified and directed by Engineer - in - Charge . |
| 21 | Demolition of brick work built in cement mortar all as specified and directed by Engineer – in - Charge. |
| 22 | Demolition of cement concrete (reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge . |
