Tender For Certain B/R Misc Services At Offrs Md Accn And Offrs Mess Of Umroi Mil Stn Under Ge Umroi; 1 M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top layer of 5mm thick finishing the surfaces with fair and even without using extra cement including taking down existing plaster of any description complete all as specified and directed.Note: Integral waterproofing compound shall be measured and paid separately. 2 Supply only integral waterproofing compound all as specified and directed. 3 M&L for preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm) complete all as specified and directed. 4 M&L for rendering 10mm thick in cement mortar (1:6) internal surfaces on fair faces of brick work or concrete surfaces, making finished even and smooth without using extra cementincluding taking down of cement plaster complete all as specified and directed.. 5 M&L for preparing surfaces of newly plastered surfaces on walls and applying two coat of distemper oil emulsion on surfaces of walls with putty of 1.0 mm thick wherever required as per direction of Engr-in-charge compelete all as specified and as directed. Note: Wall care putty shall be measured and paid separately. 6 M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on walls surfaces with putty of 1.0 mm thick wherever required as per direction of Engr-in-charge complete all as specified and as directed. Note: Wall care putty shall be measured and paid separately. 7 M&L for applying 1mm thick wall care putty on internal wall/ceiling complete all as specified and directed. 8 M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of ceiling with putty of 1.0 mm thick where ever required as per direction of Engr-in-charge complete all as specified and directed. Note: Wall care putty shall be measured and paid separately. 9 M&Lfor preparation of old external surfaces of existing treatment by washing, rubbing down and stopping of weather proof paint and painted surfaces of external wall and applying one coat of antifungal paint complete all as specified and directed. 10 Material and labour for coloured glazed ceramic tiles in vertical surface 300 x 200 x 7mm/350 x 250 x 7mm/450 x 350 x 7 mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in cement mortar 1:4including demolition of existingtiles and cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 11 Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 12 M & L for vitrified ceramic tiles 8 to 10mm thick light shade(square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor laid over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 13 M & L for vitrified ceramic tiles 8 to 10mm thick light shade(square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor laid over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 14 M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demoltion of kota stone slab and removing from site and rubbish of the premisses complete all as specified and directed. 15 M & L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement mortar (1:3) including demolition of existingkota stone slab and cement mortar bedding (but not backing),and removing from site and rubbish of the premisses complete all as specified and directed. 16 M & L for chequered cement concrete tiles set, jointed and pointed in neat cement slurry with mixture of white and grey cement in equal portions and no pigment and laid over and including 20mm thick screed bed or bedding layer in cement mortar of 1:4 for laying floor finishes including demoltion of existing tiles and bedding layers, removings serviceable tiles to store and rubbish of the premisses complete all as specified and directed. 17 S&F Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheetinclusive of solvent cement and fixing on and including GI frame as per specifications including taking down existing wall panelling and similar work complete all as specified and directed. 18 Taking up or down steel tubing 15/20mm diaand connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. 19 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 20 cm girth in brick walls etc complete all as specified and directed. 20 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness, including fillets complete all as specified and directed. 21 M&L for aluminium anodised snap grid frame of size 600 x 600mm for false ceiling including hangers 6 mm dia GI wire up to 1200 mm length, adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed. 22 S&F for decorative PVC ceiling board of superior quality of size 600mm x 600mm x 5mm thick fixed in aluminium snap grid frame work including fixing accessories complete all as specified and directed.Note: (i) Frame work shall be measured and paid separately under respective item.(ii) Colour and design of PVC ceiling board shall be approved by GE. 23 Supply & fixing in repairs vitreous chinaurinal half stall type size (465x355x265) white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including60mm long brass screws pointing around urinal back in cement; fixing flushing cistern with brackets, grating and union including waste pipe and PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc complete all as specified and directed. 24 S&F in repair wash hand basin with pedestral, white flat back of size 630 x 450mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc. including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. 25 Supply and fix in repair single Piece WC with UF Seat cover, hinges, accessories set, cistern fitting new rimless of size 690 x 375 x 730 mm, white colour complete with all accessories set including fixing bolts and necessary connection with existing pipe complete all as specified and directed. Cat No: C8939,S-220 Apollo of make parryware or equivalent in Jaquar/Hindware/Cera. 26 S&Ffor vitreous china wash down water closet pan EWC, white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed. 27 S&F in repairs 10 litres capacityPVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. 28 S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. 29 S&F in repairs 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. 30 Supply and fix in repair brass chromium plated wall mixer for mixing hot and cold water screwed down to CPVC pipe SDR-11 Pipe of outer dia 20 mm complete all as specified and directed. 31 S&F in repairs chromium plated basin mixer for mixing hot & cold waterscrew down to CPVC pipe SDR-11 pipe of outer dia 20 mm complete all as specified and directed. 32 S&Fin repairs Brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed. 33 S&F in repairs Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 34 Supply and fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 35 Supply and fix stainless steel toilet paper holder with flat recessed type complete all as specified and directed. 36 S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement complete all as specified and directed. 37 S&F in repair 20mm dia decorative type tubular curtain rod, chromium plated including decorative brackets complete all as specified and directed. 38 Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. 39 M&L for cement concrete 75 mm thick as in floors type B- 2,1 :2:4 (using 40mm graded stone aggregate) complete all as specified and directed. 40 Taking down eaves gutters, sewage lines andrainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swannecks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 41 M & L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and directed. 42 S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. 43 S & F 110mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed. 44 S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed 45 Taking down chowkats or frames not exceeding 1.50 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. 46 Taking down chowkhats or frames with shutters (without taking off shuttersfrom the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed. 47 S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.Note :The rate quoted are deemed to be inclusive ofmaking good to the disturb surfaces to match the existing surfaces. 48 S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneeredparticle board with commercial vereering on both faces. The size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.. 49 M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfacescomplete all as specified and directed. 50 S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed and as shown on drawing.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. 51 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed. 52 S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. 53 S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 54 S&F in repair 150 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. 55 S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. 56 Supply and fix aluminium anodised (powder coated) ventilator frame withside hung shutter (bottom half portion fixedand top half portion openable shutter with 4.0mm thick frosted glass)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements, hinges, tower bolt fixed with screws to wall etc. complete andglazing with and including 4 mm thick frosted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc. with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter: 41 x 20 x 1.50 mm thick(b) Section for frame:63.5 X 38.1X 1.53mm thickNote: The quoted rate shall be inclusive of taking down ventilator of any size and any description and making good disturb surfaces to match the existing surface as per existing schedule of finishes. 57 Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 5 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter:- (i) H section: 39 x 20 x 1.50 mm thick (ii) Interlock section: 39 x 20 x 1.50 mm thick(iii) Edge & Bottom section: 41 x 20 x 1.50 mm thick (b) Section for frame:-(i) Top & Sides: 92 X 29.50X 1.50mm thick(ii) Bottom: 92 X 29.70 X 1.50mm thickNote: The quoted rate shall be inclusive of taking down window of any size and any description and making good disturb surfaces to match the existing surface as per existing schedule of finishes. 58 M&L for 18 mm thick plywood grade BWR, type BB fixed with screws to timberframe work for kitchen cabinet, cupboard etc. including dismantling existing wooden cabinet/ cupboard complete all as specified and directed. 59 M&L for 0.9 mm thick decorative laminate type I of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed. 60 S&F 50 mm size butt hinges, extruded brass, with mild steel hinge pin, bright polished, type E-11 complete all as specified and directed. 61 S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 62 S&F100 mm long, brass handles, cast type, polished bright complete all as specified and directed. 63 Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and making good for aluminium earthing strips after fixing of sheets complete all as specified and directed. 64 Fixing only plain or corrugated steel sheet of any guage or thickness as obtained from dismantling item No: 63 and shall be fixed with and includingL or J type hooks or cranked hook bolts as in roof complete allas specified and directed.. 65 S&F pre-painted galvalume aluminium zinc coating PPGL based corrugated/Trapezoidalsteel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 66 S&F Pre- painted galvalume aluminium zinc coating PPGL based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eaves board, fixed with self tapping screws, complete all as specified and directed. 67 Dismantling wrought iron or mild steel work of any description nototherwise provided for complete all as specified and directed. 68 S&F steel work in tubular vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240 complete all as specified and directed. 69 S&F steel rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade St-240complete all as specifed and directed. 70 M&L for preparation of newsteel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed . 71 M&L for preparation of old painted steel surface of any description, not otherwise described over 10 cm and applying a coat of synthetic enamel paint complete all as specified and directed. 72 S&F repairs second class hard wood, clean sawn, weather boarding (eaves board) plain 25 mm thick and 225 mm wide (V jointed to give 20 mm laps) and including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete allas specified and directed.Note:-(a) Quoted rate are deemed to be inclusive of scafolding work upto 14.00 m height. 73 M&L for preparation of old painted woodand wooden surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.Note:-(a) Quoted rate are deemed to be inclusive of scafolding work upto 14.00 m height. 74 Schedule of Credit
