}

Tender For Raising The Height Of Existing Boundary Wall, Replacement Of Damaged 03 No. Main Gate And Renovation Of Security Check Post At 400Kv S/Stn Bbmb Panipat., panipat-Haryana

Tender Notice

50932982
Corrigendum : Tender For Raising The Height Of Existing Boundary Wall, Replacement Of Damaged 03 No. Main Gate And Renovation Of Security Check Post At 400Kv S/Stn Bbmb Panipat.
Tender
Indian
Haryana
Panipat
29-10-2025

Tender Details

Tender For Raising The Height Of Existing Boundary Wall, Replacement Of Damaged 03 No. Main Gate And Renovation Of Security Check Post At 400Kv S/Stn Bbmb Panipat.; 1 Mild Steel grinding Vatti ( 0 Number ) for cutting & leveling. 2 Scraping ( c )Cement plaster 3 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. 4 Cement concrete 1:2:4 (a) With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type 5 Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. 6 20mm thick cement plaster 1:5 in two coat work 7 Cement pointing 1:2 deep variety 8 Steel work fixed independently without connecting plates including cutting hoisting and fixing in position ( C ) Tees angles & channels 9 Welding by gas or by electric plant, including carriage to and from workshop etc. 10 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 liter/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 11 Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. 12 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead 13 Dismantling concrete (d) Cement concrete plain1:2:4 mix 14 Dismantling brick work tile, masonry or tile lining (b)In cement 15 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m 16 Cement concrete 1:4:8 (a) with stone ballast20mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type 17 First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth 18 Cold twisted detormed (Ribbed/ Tor steel) Bars(Fe 500 grade as per IS 1786-2008) , for R.C.Cworks, where not including in the complete rate ofRCC including bending and binding placing inposition complete 19 centring and shuttering for columns (Square or rectangular or polygonal in plain) 20 centring and shuttering for sides and soffits of beam, beams, launching girders, bressummers, lintels. 21 Centring and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc. 22 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth 23 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in super structure 24 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure 25 Earth filling:-(ii) Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres 26 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish /Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shadecomplete. 27 Providing & fixing 16 gauge stainless steel pipe gate of grade 304 duly fixed at site with the help of M.S pivot & hinges grouted in cement concrete complete in all respect as per any kind of drawing & design. 28 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 29 Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b)Windowsof area 3 sqm and below 30 Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base 31 Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body (a) Size 600x600 mm 32 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. 33 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 34 Wire gauge Hollock wood door shutter without springs housed in chowkhat. (35 mm thick ) 35 Wire gauge fixed on chowkats with 25mm thick Hollock wood cover molding of full width. 36 Providing & fixing 100mm with Plate 150mm X 32 mm anodized aluminum Mat Finish handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 37 Providing & fixing 100 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 38 12mm thick cement plaster 1:5 39 Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete 40 Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade 41 White washing ( two or more coat) 42 DISMANTLING WIRING POINTS & FITTINGS:Dismantling old wiring points including necessary repairs to wall etc: 43 (i) Fan, light or call bell point 44 (ii) Wall socket, power plug point 45 (iii) Removal of existing Tube fitting etc. 46 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½ deep for walls and CI 3 deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):(CSR-2020 Ref-34.2)(i-a) (ii) (iv) (vi) 47 (i) a Wiring fan point (Without fan box) 48 (ii) Wiring light point 49 (iii) Wiring 6Amp. wall socket point 50 (iv) Wiring 16/20Amp. power plug control point 51 SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,: 52 (i) Modular MCB 20Amp. (Two Module) 53 (ii) Bakelite Batten Holder (Large Size) 54 Dismantling Sanitary fixtures such as European/ Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge 55 (a) Eurpoean/Indian/Orissa W.C., 56 (b) PVC /China ware cistern 57 (c ) Wash hand basin / urinal pot 58 Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. 59 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm 60 Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect. 61 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut 62 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.(i) C.P. brass Bib cock long nose/ long body foam flow without flange 63 Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) 64 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.(a) C.P.brass 15mm stop cock Male and female end 65 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 66 Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. 67 Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440 mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. 68 Dismantling concrete(b) Cement concrete plain 1:4:8 or 1:5:10 69 Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 70 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 meters. 71 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber molded smooth finish with strong vibratory process or withvibrio/hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for IS Code 15658(2006) 72 70% old paver used of Qty. as sr No.-3 (L/R only) 73 30% New paver used of Qty. as sr No.-8 (T/R) 74 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer- 1291 SUB HEAD : 16- ROAD WORK in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 75 Providing & fixing Acrylic 3D Letters with light module i.e. Samsung, Philips, Havel etc. Reputed make complete in all respect with 1year warranty (Height=8) 76 Providing &fixing 304 grade 3D Letters with module light including 1 year warranty complete in all respect (Height=8) 77 P/F of concealed box, Led Light=20Watt. and pillar gate Led Light complete in all respect upto satisfaction of officer in-charge

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 09-10-2025 Date Extension Corrigendum Date 29-10-2025
2 24-09-2025 Date Extension Date 08-10-2025

Key Value

Document Fees
INR 2360 /-
Tender Value
INR 41.76 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail