|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | 15 mm cement plaster on rough side of single or half brick wall of mix : a) 1:6 (1 cement: 6 coarse sand) |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (a) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 4 | Finishing walls with Acrylic Smooth exterior paint of required shade : (a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 110 mm diameter |
| 6 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.wall. (a) Single tee with door (i) 110x110x110 mm |
| 7 | (b) Single tee without door (i) 110x110x110 mm |
| 8 | (C) Bend 87.5°(i)110 mm bend |
| 9 | (d) Shoe (Plain)(i) 110 mm Shoe |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall (a) 40 mm nominal outer dia. Pipes. |
| 11 | Providing and fixing unplasticised -M.S/PVC pipe clips of approved design to unplasticised - PVC rain water pipes screwed with M.S. screws of required length including cutting brick work if required and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (a) 110 mm |
| 12 | Cutting of suspended C.I pipe cover for cable duct from parapet wall to 3rd floor by cutter machine or other tools etc. all complete as per direction of Engineer-charge. |
| 13 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with bamboos 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with bamboos, bamboo challies, clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 14 | Credit of unserviceable C.I Pipe as obtained from cutting as per direction of Engineer-in-charge. |
