Tender For Repair/Replacement Of Furniture Against Ber Furniture At Hq Eac (U) Af Under Ge (I) Af Shillong, shillong-Meghalaya

Repair/Replacement Of Furniture Against Ber Furniture At Hq Eac (U) Af Under Ge (I) Af Shillong--- 1 Almirah Large Steel 1/2 Hanging 1/2 Shelves-TP Overall size shall be 1950mm x 900mm x 507mm.It should come with a drawer, locker and superior quality digital prints for bright colours and a clear and sharp finish.Material - CRCA steel Net weight- 66 KgsMake Godrej Slimline 2 Door Digital Printed 2 Almirah Large Steel with shelves-TPOverall Size shall be 1950mm x 900mm x 507mm.It shall come with four shelves and of superior quality with bright colours and a clear and sharp finish.Material - CRCA steel Net weight- 71.3 KgsMake- Godrej Slimline 4SH 3 Almirah Med Steel with adjustable shelves-TPOverall size shall be 1270mm x 765mm x 440mm.It shall come with a 3-way locking mechanism and a 6 lever lockMaterial - CRCA steel Make- Godrej Storwel Minor Plain 4 Bed Hard-Drawing No FD/E6/MAP/08 (R) Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board..25mmx65mm rectangular CR pipe shall be used to make the long railsand short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs ofheadboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved makefixed over the four equidistantstiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section.PVC shoes shall be provided to legs of bed. All metal /iron work shall be treated with synthetic enamel black after doing two coats of metal primer. Rest all as per drawing. 5 Chair dining JCO/ORs-Drawing No FD/MAP-II/05Overall size shall be 890mm high, 440mm wide and 430mm deep. The size of the legs shall be 30x55mm .Front and side rails shall be of size 30x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.One stiffener of size 40mmx40mm shall be fixed in between the two opp rails of the seat for providing extra support to PVC seat. PVC seat 4mm thick of PPCP material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws. The height of the seat shall be at 460mm high from ground. The size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.Timber species shall of super group as per IS 287:1993 with permissible moisture content. All wood surfaces shall be lacquer polished with high gloss finish of natural shade. Rest all as per drawing. 6 Chair dining Offrs-Drawing No FD/MAP-II/04Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixedwith main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be ofsection 40x50mm..Four teak wood vertical stiffenersof section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffersshall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg.Timber species shall of super group as per IS 287:1993 with permissible moisture content. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg. 7 Sofa Set 5 seater-Drawing No FD/MAP-II/02Sofa shall be manufactured to the shape, size and design as shown on drawing. The base of seats and back shall be provoded with 12mm thick BWR grade plywood conformng to IS-303. 100mm thick cushion of 40 density covered with best quality tapestry cloth (approved by GE, not less than Rs 350/meter) shall be provided at seat and back as directed by Engr-In-Charge. Make of cushion-kurlon/sleepwell/nindiya. Timber species shall of super group as per IS 287:1993 with permissible moisture content.All wooden surfaces internally and externally shall be melamine polished with high lacquer finish of walnut shade after properly smoothened the surface with sand emery paper.Rest all specifications areas per drg. 8 Chair executive high back revolving-TPChair executive high back revolving with wooden arm rest, wooden base and torsion bar recliner mechanism.Make EEZY Model - EEZY209N 9 Chair low back revolving-TPOverall size of the chair shall be 600 x 710 x 1214.1 mm.It shall be of leatherette with adjustable height and revolving mechanism. The base will be of nylon with castor wheels. Make -Royaloak Model CR7903

INR 500 /-

INR 35 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB