Tender For providing Of Central Engineering Services At Barrackpore Under Ge Barrackpore-- 1 Note:- (Applicable for all parts/items/):- The bidders/contractorsare advised to read tender document, all drawings & all corrigendum / amendments and General conditions of contracts before entry/quoting the rates.SCHEDULE A PART-I (SMC/ GRP PANEL OVERHEAD WATER TANK 01 (ONE) LAKH GALLON CAPACITY WITH STRUCTURAL STEEL STAGING 16 M HEIGHT WITH RCC FOUNDATION)Note :- This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs. 0.00 under Col - 5 signifies this fact only. 2 Design, supply and errect/ construction SMC/ GRP PANEL OVERHEAD WATER TANK 01 (ONE) LAKH GALLON CAPACITY WITH STRUCTURAL STEEL STAGING 16 M HEIGHT WITH RCC FOUNDATION, anchor bolts, base plates and all structural steel items & all necessary civil works as required with all fittings, fixtures etc. complete allas specified.Note :- (i) The vetting of design and drawings of all structures shall be got done only from any one of the IITs and the quoted rate shall deemed to be included the cost of the same.(ii) The provision of GRP PANEL OVERHEAD WATER TANK 01 (ONE) LAKH GALLON CAPACITY mentioned above is deemed to be included in quoted rate of this item. 3 Lumpsum price workedout by the tenderer for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK AND EXCAVATION as listed in Schedule ‘A’ Part-II. 4 Lumpsum price workedout by the tenderer for ROAD, PATH, HARDSTANDING AND CULVERT as listed in Schedule ‘A’ Part-III. 5 Lumpsum price workedout by the tenderer for COMPOUND WALL as listed in Schedule ‘A’ Part-IV. 6 Lumpsum price workedout by the tenderer for CHAIN LINK FENCING AND GATE as listed in Schedule ‘A’ Part-V. 7 Lumpsum price workedout by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI. 8 Lumpsum price workedout by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VII. 9 Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VIII. 10 Lumpsum price workedout by the tenderer for DEMOLITION & DISMANTLING as listed in Schedule ‘A’ Part-IX. 11 Subtotal of Schedule A Part-I to Part-IX 12 NOTE:Schedule A Part-X (MISC B/R & E/M SERVICES) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under Col. 5 siginifies this fact only. 13 Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes if any etc.and Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed.Notes :(i)Earth required for the item, shall be supplied by contractor, from out side MOD landof any lead, at his own arrangement. (ii)All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.(iii)With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment / traverse of filled earth after consolidation / compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk.(iv) Total quantity / partial quantity of earth may not be available in Dinjan area. The contractor shall bring the earth outside area and it is advised to quoted the rate considering availability of soil and its lead involved. 14 Taking up or down lightening arrestor, grid system alongwith 4 Nos earthing including strips, rods, etc. 15 S & F convex mirror of 80 cm dia with SS poles of 50-60mm bore (length of poles is 2.00m) fixed with cleats and hooks including nuts, embedded in post holes of size (40cm x 40cm x 60cm) in PCC 1:2:4 Type B1 using 20mm graded aggregate including earth work, etc. complete all as specified and directed. 16 M & Lfor outdoor endura floor tiles of size exc 0.11 Sqm but n exc 0.22 Sqm, thickness 9-10mmof set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed. 17 M & LSuper Razor Punched Barb Tape (SRPBT) Aluminium base helix concertina coil with 9 numbers SRPBT Aluminium base Horizontal Runner Wire and including necessary GI fixing clips for securing and tied to Y angle iron post and strut laid over boundary wall complete all as specified and as directed with following specifications :-(i) Dia of Coil (unstretched) - 610 mm(ii) 6 Spirals per Running Meter(iii) Weight of each coil with hessian pack - 8.5 Kg (+0.5)(iv) Central Core Wire - Made from 2.60 (+0.5) mm dia G.I High Carbon Wire as per IS - 4454, galvanised as per IS 2629(v) Razor Punched Strip - comprising of aluminium base with Zinc alloy @ 150 gm/Sqm conforming to ASTM A-792/A-792M and Barb Tape length - 23.50 mm. Flatten Strip Barb Width- 18.60 mm, Barb Spacing - 36.00 mm, Centre Width - 7.40 mm. 18 Material and Labour for fittings for DI pipe of any description any size. 19 Supply and laying, jointing and testingof ductile iron pipe 150mm dia Double Flaged Type of class K-7 laid in trenches complete all as specified and as directed. 20 Supply and laying, jointing and testingof ductile iron pipe 200mm dia Double Flaged Type of class K-7 laid in trenches complete all as specified and as directed. 21 Supply, install, testing & commissioning three phase monobloc Pump set,gland pack type,cast iron impeller,having 150 x 150 mm Suction and delivery,and pump should have capability of pumping min 100000 L/Hour at a head of 40 meter.power rating: 30 H.P,3 phase, capable of operating in voltage range of300-440 V , Material of Construction: Casing: Cast Iron, Shaft: Carbon Steel, Impeller: Cast Iron Shaft Sealing: Gland Packing. 22 Supply and fixing of polished copper air termination base including four fixinng screwfor holding Copper rods of 15 mm dia 1 mtr length ,base should be four way accessible for terminal connection of aluminium strip of 25 mm size and providing support to Air termination rod.rate quoted is including air termination copper rod of size 15 mm dia and 1tr lenth. 23 Material and labour for fixing ofaviation light ofaluminium body LED 6 W on Over head tank at top of tank including base clamp,post lamp cable appx 30 rm and other connected accessories as directed. 24 Supply and fix Foot Valve conforming to IS 4038, 150 mm (6”) dia. 25 Material and labour for water level sensor and indicator automatic type plc controlled along with displayfor OHT of appx height 24 rm PLC controlled. 26 Supply, installation, testing and commissinoningLT Feeder Panel(CPRI approved) of size 1500 x 1500 x 400, 3 phase ,4 wire ,415 volts, AC ,50Hz ,indoor type, floor mounted, free standing, dust and vermin proof, air ventilationmade out of 2 mm thick CRCA sheet and suitable sizedangle iron and flat duly powder coated and any manufacturer shall befollowed CPRI norms and as approved by GE.Panel shall have front opening,locking arrangement, cable alleys, bus bar chamber and switch gear compartment ,hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, including civil work/PCC foundation as per site requirement complete all as specified and directed including comprising of following:- Incoming:(a) MCCB 400 Amps, FP,50 KA,415 volts,50Hz- 01 Nos(B)Onload manual changeover 250 AOut going:MCCB 160Amps, TP 36 KA 415 volts, 50 Hz-01NoMCCB 100Amps, TP 36 KA 415 volts, 50 Hz-02NoMCB 63Amps, TP 10 KA 415 volts, 50 Hz-03NosFASDstarter, 30 HP- 2 NosSingle phasing preventor -2 setDigital voltmeter,amp meter,selector switch incoming -1 SetDigital voltmeter,amp meter,selector switch out going - 1 SetLED phase indication lamps RYB-01 set Aluminium bus bar TPN 250 Amps rating -01 setCT,s 400/5- 3 setMCB 6 A SP 10 KA for protection.-3 nosPush buttons -1 Set 27 Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 200 mm dia bore and fixing up in Cast Iron Water supply mains of size 200 mm dia. 28 Supply and fixing Octagonal steel pole of 6 Mtr height, taper type with top dia 70 mm and bottom dia 130 mm factory made with 3 mm thick sheet including base plate of size 200x200x12mm and 4 Nos bolt of size 20 mm dia and 600 mm length complete with single armed bracket of length 1 Mtr. 29 Supply installation and testing of analog type time line distribution board of 16 A ,3 pole/230 V with analog time switches for street light having100 hrs battery backup,1 P module type. 30 Material and labour for taking down Steel tubular pole, street light fitting and keeping aside the fittings for re using of street light fittings in new pole. 31 Material and labour for fixing FRLSH cable pvc insulated 3 core 1.5 sqmm for connection of street light from junction box to fittings including jointing clip and other minor connected items required for the same. 32 Material and labour for taking down cable of any description and any sizes and keeping aside ,cheeking wheather any damage is there ,taking out the bricks and keeping aside after cleaning for re use.Rate quoted is including excavation ,returning filling,removing as required. 33 Material and labour for re layingcable of any description and any sizes in new route including excavation ,re use of old bricks,returning filling ,removing .Note:Sand is consider seperately for supply and fixing. 34 Supply, errect, install Solar LED light fittings with Extruded Aluminium Housing corrosion proof, Solar panel (Mono Crystalline Solar PV module) 70 W , LED power 30 W, Lumen/Watt > 125, Solar Charge Controller - MPPT, Battery capacity - Maintenance free Lithium Ferro Phosphate battery 12.8V - 36 Ah, BIS Approved Cells, Inbuilt BMS for Battery Safety & Enhanced battery life,Operating temperature -20 Degree to + 55 Degree, Designed for 2000 life cycle : > 5yrs life, Faster Charging,Maintenance free Backup for 2 days, PIR Motion Sensor for Automatic brightening & dimming,Lumen(LM)>3800lm, LED life time - 50000hrs, Viewing angle - 120°, Charging time - 1 day, Autonomy2 days, CCT(K) - 5700K, Mounting height5-6m, Working temp.-10-+55C, Dimension(mm)1320*382*55, Net weight 19 Kg, including earthwork, PCC foundation as per site requirement and necessary mounting ERW pole of 50 - 100 mm dia heavy grade min 4 Mtr long with all accessories, cables complete all as specified and directed 35 Subtotal of Schedule A Part-X
