|
| 1 | Material to be carried out from Store centre, Mathura to work site. |
| 2 | ST Pole (13 mtr. Long) SP-70(Bottom Portion Galvanized) |
| 3 | 33/11 KV 10 MVA Power T/F. |
| 4 | 33 KV XLPE Cable 3x300 Sq.mm. |
| 5 | 33 KV 3x300 Sq.mm. Outdoor type cable Jointing kit |
| 6 | 33 KV 3x300 Sq.mm. Straight Through |
| 7 | 33 KV Pin insulator |
| 8 | 33 KV Pin with Nut |
| 9 | Polymeric 33 KV Pin insulator |
| 10 | 33 KV V-type Cross arm 100x50x6mm, MS Channel |
| 11 | ACSR Dog conductor |
| 12 | Cartage of above material like various size ST/PCC Poles, Distribution T/F. 33 KV, 11 kv, LT cable, dog/weasel conductor, Jointing kit, insulator, pin insulator, channel, clamps etc. from Store Center, Mathura to work site and dismentled material from site to dvvnl store. |
| 13 | Digging of pit & erection of new single support ST Pole (13 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support. |
| 14 | Providing & Fixing MS Angle 65x65x6 for Guarding of 33 KV Line |
| 15 | Laying of ACSR Dog conductor |
| 16 | Earthing of ST/PCC pole by MS Earth Rod |
| 17 | Laying of 3x300 Sqmm. XLPE Cable |
| 18 | Providing & Fixing of G.I. wire 6 SWG for Guarding of 33 KV Line |
| 19 | Providing & Fixing of G.I. wire 8 SWG for Guarding of 33 KV Line |
| 20 | Providing & fixing Holding clamp for guarding |
| 21 | Concreting of Pole (STP 13 Mtr./11 Mtr.)/8.5 Mtr. PCC Pole |
| 22 | Painting of ST pole |
| 23 | Painting of ST pole by Red Oxide |
| 24 | Providing & fixing of Danger Plate with clamp and Nut & Bolts |
| 25 | Providing & fixing of Danger Board with clamp |
| 26 | Providing & fixing of Barbed Wire |
| 27 | Providing & fixing of Stone Pad |
| 28 | Providing & fixing \"F\" Bracket |
| 29 | Providing & fixing \"E\" Bracket for 33 KV |
| 30 | Providing & fixing Number Plate with clamp and Nut & Bolts |
| 31 | Providing & Fixing 33 KV Cross arm Channel 100x50mm |
| 32 | Providing & Fixing 33 KV Cross arm holding clamp with Nut & Bolts |
| 33 | Fixing of 33 KV Pin Insulator |
| 34 | Fixing of 33 KV Pin with Nut |
| 35 | Fixing of Polymeric 33 KV Pin Insulator |
| 36 | Fixing of 33 KV V-type Cross arm 100x50x6mm, MS Channel |
| 37 | Providing & Fixing of clamp for 33 KV V-type Cross arm with Nut & Bolts |
| 38 | Providing & fixing MS Nut, Bolt & Washer |
| 39 | Providing & Fixing MS Nut, Bolt off size with washer |
| 40 | Digging of trench by Making pits/open trench method after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites departmentand laying, Testing, Commisiong & energization of 33 KV XLPE Cable of size 3x300 sqmm. XLPE by open trench Including all material Like brick & sand and Back filling and proper dresing. |
| 41 | Fixing of Outdoor type cable jointing kit for 33 KV 3x300 sqmm. XLPE cable |
| 42 | Fixing of Straight Through for 33 KV 3x300 sqmm. XLPE cable |
| 43 | Water Level T/F. Neutral and Body Earthing |
| 44 | Installation, Testing, commisioning & Enersization of new 10 MVA Power T/F.and 11 KV Feeders and connect it to existing system. (Carriage & Installation of T/F. at Plinth shall be done by the Contractor) |
| 45 | Repairing of Plinth for Power T/F. |
| 46 | Opening of Jumper & Connection & Earthing of Body & Neutral ofexisting 5 MVA T/F. and Dismantling of Neutral Earthing frame, cable frame and complete job of shifting of 5 MVA T/F. along with other associated items (if any) at S/S. Switchyard |
| 47 | Hiring D/G. Set 63 KVA 3 Phase for testing of Power T/F. |
| 48 | Dismantling existing line and Pole along with other associated accessories and cartage from work site to store center, mathura |
