Tender For Provision Of Attached Toilet In The Chamber Of Add. Dgt At First Floor And Miscellaneous Civil Work In Jhalana Building, Jaipur--- 1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 4 Thermo-Mechanically Treated bars of grade Fe-500D or more. 5 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6 Cement mortar 1:4 (1 cement :4 coarse sand) 7 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry. 8 Providing and fixing natural stone/sand stonefor lintel of minimum thickness 50 mm for half brick masonry. 9 Providing and fixing Ist quality ceramic glazed wall tilesSize of (600x1200mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 11 Granite stone slab colour Z black, Cherry/Ruby red 12 Area of slab over 0.50 sqm 13 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 14 Granite work 15 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 16 250x16 mm 17 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 18 150x10 mm 19 Providing and fixing bright finished brass handles with screws etc. complete: 20 125 mm 21 Providing and laying Ceramic glazed floor tiles of size 400x400 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. 22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, 23 (i)Single socketed pipes. 24 110 mm diameter 25 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 26 Single tee with door 27 110x110x110 mm 28 Bend 87.5° 29 110 mm bend 30 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 31 110 mm 32 12 mm cement plaster of mix : 33 1:4 (1 cement: 4 coarse sand) 34 15 mm cement plaster on rough side of single or half brick wall of mix : 35 1:4 (1 cement: 4 coarse sand) 36 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 38 Two coats. 39 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. 40 With cement mortar 1:4 (1cement: 4 coarse sand). 41 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 42 For thickness of tiles 10 mm to 25 mm 43 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 44 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 45 Providing and fixing wash basin size 500x450x150mmmake of JAQUAR (JDS-WHT-25909) all complete as per manufacturer specification. 46 White ceramic table top wash basin size 500x450x150mm 47 Providing and fixing bottle trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange make of Jaquar ( ALD-CHR-769L300X190) ,all complete as per the direction of Engineer-in-charge. 48 Providing and fixing In-wall Body of Single Lever Built-in Manual Valve for Wall Mounted Basin Mixer (Without Exposed Parts) make of jaquar ( ALD-CHR-233N), all complete as per direction of Engineer-in charge. 49 Providing and fixing of Angular Stop Cock with Wall Flange make of jaquar ( OPP-CH R-15053 PM), all complete as per direction of Engineer-in charge. 50 Providing and fixing Swivel mirror size of 630x445 mm rectangular Shap make of Jaquar (AKP-CHR-35795), all complete as per direction of Engineer-in charge 51 Providing and fixing wall mounted Bath Tub Spout with Wall Flange (SPJ-CHR-15429PM) Including Exposed Part Kit of Single Lever In-wall Manual Valve, 35 mm Cartridge (OPP-CHR-15227KPM) and Compatible In-wall partsALD-229 ) make of Jaquarall complete as per direction of Engineer-in charge 52 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 53 25 mm nominal outer dia .Pipes. 54 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 55 20 mm nominal outer dia .Pipes. 56 Providing and fixing uplasticised PVC connection pipe with brass unions : 57 45 cm length 58 15 mm nominal bore 59 Cutting holes up to 30x30 cm in walls including making good the same: 60 With common burnt clay F.P.S. (non modular) bricks. 61 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 62 25 to 40 mm nominal bore 63 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 64 Providing and fixing ball valve (CPVC) of approved quality, High or low pressure, with plastic floats complete : 65 20 mm nominal bore 66 25 mm nominal bore 67 Providing and fixing white vitreouswall mounting water closet CNS-WHT-963UFSM of Jaquar make including providing & fixing CONCEALED CISTERN (JCS-WHT-2400S), andFlush plate ( JCP-CHR-2415) including seat cover , and cistern fittings, nuts, bolts and gasket etc. all complete as per direction of engineer-in-charge. 68 Providing and fixing Two way Bib Cock of approved quality make JAQUAR (OPP- CH R-15041 PM) all complete as per manufacturer specification and as per direction of Engineer in charge. 69 Providing and fixing hand shower (HEALTH FAUCET) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook, make ofJAQUAR ( ALD-CHR-573)all complete as per manufacturer specification and as per direction of Engineer in charge. 70 Providing and fixing of PVC nahani trap size of 110mm dia. 71 Providing and fixing grab bar stainless steel make of Jaquar ( AHS-CHR-1503) 450mm long all complete as per manufacturer specification and as per direction of Engineer in charge. 72 ProvidingSoap Dispenser with Glass Bottle make of Jaquar( CPA-CHR-1135) and fixing on wall with screw, all complete as per direction of engineer-in-charge. 73 Cutting hole in brick wall upto size of 300mm with the help of core cutter machine , including cleaning of surface and repair as same, all complete as per direction of engineer-in charge. 74 Providing and fixing C.P. grating of approved quality and colour. 75 Circular type. 76 100 mm nominal dia. 77 Providing and fixing CPVC union in cpvc pipe including fixing the union in cpvc pipe etc.all complete as per direction of EIC.( NEW WORK) 78 20 mm nominal bore 79 25 mm nominal bore 80 Providing and fixing FBT with solvent, cutting in proper shape and joint tasted as per direction of engineer in charge. 81 20 mm nominal outer dia. Pipes. 82 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 83 150 x 100 mm size P type. 84 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 85 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 86 For pipes 100 to 250 mm diameter 87 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 88 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 89 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 90 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. 91 (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 92 Frame size 45 x 85 mm 93 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 94 (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 95 30 mm thick
