|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixedwith earth around, in layers not exceeding 25 cm in hard/dense soil. |
| 2 | Surface dressing n exc 15 cm deep. |
| 3 | Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cm deep and getting out in hard/dense soil. |
| 4 | Providing PCC 1:1.5:3 type A-1 (20mm graded aggregate) |
| 5 | S & F joist, channel, angle or tee sections, fixed indipendently, without connecting plate etc. (cut to ordinary length i.e. within 20mm of the length indicated) |
| 6 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Fe 410-W(Gde-E-250)quality-A |
| 7 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m for foundation in hard/dense soil. |
| 8 | M/L Hardcore of gauge n.exc. 63mm deposited, spread and levelled n.exc. 15 cm thick of broken bricks. |
| 9 | M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar. |
| 10 | Providing RCC in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like M-20(20mm graded aggregates). |
| 11 | TMT mild steel bars 10mm dia and over, cut to length, bent to shape and binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 12 | Providing form work to sides and soffits of floor or roof beams, beamhaunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. & surface to be fair finished. |
| 13 | Preparation of new painted steel surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss) over one coat of red oxide primer. |
| 14 | S & F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with andprovision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 15 | M & L Boring 154mm dia and 21 m deep from floor of recharge pit with 110mm PVC pipe (15m) inclding slotted pipe (6m), bail plug at bottom end point, well cap with hole on top of PVC pipe, boulder 0.40m deep in recharge pit, gravel 0.30m deep in recharge pit including surrounding of pipe in bore well, coarse sand 0.30m deep in recharge pit, pea gravel 0.10m deep in recharge pit. Work will be carried out as per enclosed drawing. |
| 16 | Cleaning of area, uprooting small trees, shrubs, herbs etc. |
