Supply Of Materials And Erection For Construction Of 33 Kv Line Handiya Gramind Distt. Prayagraj And 33 Kv Line Pahadganj From 132 Kv S/S Lalganj To 33/11 Kv S/S Lalganj Gramind Distt. Pratapgarh In Business Plan 2024-25 On Semi Turnkey Basis - Construction of a new 33 kV Feeder for 33/11kV Baraut from 132/33kV Handia (District- Prayagraj) and 33/11kV Pahadpur from 132/33kV Lalganj (District- Pratapgarh). The scope of work includes supply, safe carriage of material (wherever required) from store centre to site, erection, testing, and commissioning of all electrical equipment, line materials, structures, and accessories, as per UPPCL/REC specifications. The work shall comprehensively cover civil, electrical, and ancillary installations necessary to ensure reliable and safe operation of the substation and connected lines. The work will be carried out under the direct supervision of EE ESWD Prayagraj. 2 (Part-A)Supply of Materials as per RESSPO Technical Specification & Drawing. (Technical Specification & Drawing attached for materials not available in RESSPO) 3 PG (Parallel Groove) clamps suitable for DOG conductor 4 33 kV cross-arm holding clamps complete with nuts, bolts, and washers, fabricated from M.S. flat/plate, galvanized as per IS:2629 5 Heat-shrinkable Outdoor jointing kit for 33 kV, 3C × 300 sq.mm XLPE insulated, armored aluminum conductor power cable, suitable for straight through joints, complete with crimping lugs, sealing, and earthing provisions. 6 Straight-through jointing kit for 33 kV, 3C × 300 sq.mm XLPE cable, heat-shrinkable type, complete with proper preparation of insulation, crimping, sealing, and earthing as per IS:13573. 7 E-type brackets with bolts and nuts, suitable for 11 mtr. steel tubular poles, galvanized as per IS:2629 8 F-type brackets, galvanized iron, with necessary bolts and nuts 9 Galvanized nuts, bolts, and spring washers of standard sizes (as per IS:1363/1367) 10 G.I. pipe of 6 inch diameter, medium class, conforming to IS:1239 11 Bracing clamps with nut and bolts 12 Galvanized iron top channel clamp, suitable for 11 mtr. steel tubular poles, with nuts and bolts 13 PG clamps suitable for jointing DOG to Panther conductors, made of aluminum alloy with galvanized bolts, ensuring efficient electrical conductivity and reliable jointing. 14 Enamel painted mild steel danger boards with clamps, conforming to IS:2551, marked DANGER 33,000 VOLTS with skull and cross bones 15 Galvanized iron barbed wire, 2.5 mm dia with 2 mm barbs @ 75 mm spacing, conforming to IS:278 16 Aluminium paint (ready mixed), ISI marked 17 Red oxide zinc chromate primer, conforming to IS:2074 18 (Part-B)MOUNTING, FITTING & ERECTION OF WORK AS PER RESSPO NORM. 19 Carriage of 11/9 Mtr long STP and 8.5m PCC Pole from Store to dump store/work Siteincluding loading and unloading. 20 Carriage of 33 KV 3x 300 sq mm and 11 KV 3x185/120 sq mm XPLE cable from Store to dump store/work Site Including loading and unloading. 21 Erection of 11 mtr double ST pole support with fixing of necessary clamps, Cross Bracing angle and other accessories like channel, insulator etc..(as per RESSPO) All material provided by contractor except 11 M Long ST Pole ST Pole,Channel and Insulator.. 22 Erection of 9/11 mtr single ST pole support with fixing of necessary clamps, Cross Arm angle and other accessories like channel, insulator etc..(as per RESSPO)All material provided by contractor except ST Pole,Channel and Insulator. 23 Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nuzzling (All require materials will be arranged by contractor except Stay rod 16X1800mm, Stay wire 5 KG„ Stay clamp, Loop Insulator. 24 Grouting of ST Pole, grouting in ratio1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement sand & bricks Ballast in ratio 1:4:8 and 12 mm thick plastering around the plinth in ration 1:2:4 with 12 mm thickness curing of plinth should be done properly. (as per RESSPO) All material provided by contractor. 25 Earthing of support (ST/PCC Pole) complete with the help of M.S. rod 20 mm Dia and 2.54 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod.As per RESSPO and Electrical safety rules. (All Material Provided by Contractor except M.S. Earth Rod) 26 Painting of ST Pole and Channel & Clamps (double coat red oxide and double coat Alluminum paints. Painting materials provided by contractor.) 27 Laying of 33 KV 3 x 300 Sq mm. XLPE power cable by HDD Method at suitable depths such that maintenance is possible. (All the materials, except cable, will be provided by the contractor). 28 Laying of 33 KV 3 x 300 Sq mm. XLPE power cable by digging 0.75 Mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it RMT finally covering the same by earth and leveling of the same. (All the materials, except cable, will be provided by the contractor). 29 Outdoor jointing kit (Make Weasel/Raychem/3M) 3x 300 sq mm 33KV 30 Straight through jointing kit (Make Weasel/Raychem/3M) 3x 300 sq mm 33KV 31 Stringing, sagging, and binding of ACSR Dog conductor on already erected poles, including complete work of fixing and tightening of all associated line fittings such as galvanized steel cross-arms, F-clamps, 33 kV disc/pin insulators with hardware, suspension clamps, tension (dead-end) clamps, jumpers, and all required nuts, bolts, and washers. The work shall include handling and laying of conductor from drums, hoisting, stringing with proper sagging, jointing with compression-type mid-span joints, and termination as per REC/UPPCL construction standards. Carriage of conductor, fittings, and associated line material from the designated Store Centre to the work site shall be in the scope of the contractor. All labour, tools & plants (T&P), and consumables required for safe and reliable execution of the work are deemed to be included in the scope
