|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.5m as directed by Engineer-in- charge. DSR 2023 Vol-1 Code-2.1.1 |
| 2 | 1:4:8 (1 Cement:4 coarse sand (zone-III) derived from natural soures : 8 graded stone aggregate 40mm nominal size derived form natural sources)DSR 2023 Vol-1 Code-4.1.8 |
| 3 | Reinforced cement concrete work in wall (any thickness), including attached, plaster, buttresses, plinth and string courses, fillets, columns, pillers, piers, abutments, posts and struts etc above plinth level up to floor five level excluding cost of centering shuttering , finishing and reinforcement: DSR 2023 No. 5.2.2 |
| 4 | Reinforced cement concrete work in arches,archribs, domes,vaults,shells,folded plate and roof having slope more than 15 degree up to floor five level, excluding the cost of centering,shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand :3 grades stone aggregate 20 mm nominal size) (As per DSR-2023-5.5) |
| 5 | Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular, as per design and shape for floors and roofs in 1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 10 mm nominal size derived from natural sources), including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but, excluding the cost of reinforcement.as oer DSR 2023 5.36 |
| 6 | Centering and shutterng including stutting,propping etc. and removal of form work or Arches,domes,vaults up to 6m span (As per DSR-2023-5.9.9) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D as per DSR 2023 5.22.C.1 |
| 8 | Brick work with common burnt clay F.P.S. (Non modular) brick of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in(1:6) DSR 2023 No.6.4.2 |
| 9 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone - 30mm thick gang saw cut stone as per DSR 2023 8.20.1 |
| 10 | Providing and fixing expansion hold fasteners on CC/RCC/Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete Wedge expansion type fastener with threaded dia 10 mmincluding cost of materials, machinery,T&P, Labour etc complete as per direction pf E/I. As per DSR 2023 Item 8.8.1.2 |
| 11 | Providing and applying white cement based putty of average thickness1 mm of approved brand and manufacture over theplastered wall surface to prepare the surface even and smooth complete.(As per DSR-2023-13.80) |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (As per DSR-2023-13.46.1) |
| 13 | 12mm thick plaster with 1:4 ratio cement,sand mortar with finishing coat neat cement (As per DSR 2023 -13.1.1) |
| 14 | Provision for Lettering/ engraving matters at Gateway and at site as required |
| 15 | Supply & Fixing of Ornamental work complete as per direction of E/I. |
| 16 | Supply & Fixing of Electrification work complete as per direction of E/I. |
