Tender For Miscellaneous Works Of Smashanbhum At Umrale Kh Tal Dindori Dist Nashik-1 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means 2 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor 3 Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding 4 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering. formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with 6 Providing and fixing in position TMTFE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis. copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires Providing second class Burnt Brick masonry with conventional/ 1.S. type bricks in cement mortar I:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out Providing and erecting chain link fencing 1.6 M. height with G.l. chain link of size S0 x S0 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for |foundation and embedded in C.C. block of l:4:8 mix of size 450 x 450 x Providing and fixing 50 mm. dia. medium class G.l.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with |locking arrangement including cutting. bending, making holes and with one Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper |cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white- wash) etc. complete. | Providing and fixing Name board displaying information, such as Name of work, Tender cost, Name of Contractor Shooting of still photographs
