Tender For Repair To Wooden And Steel Furniture At Sri Ganganagar Mil Stn; 1 WOODEN FURNITUREBED PLY WOODS&F in replacement long rail made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 2 S&F in replacement short rail after making the same from long rail complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable Note:- Short shall be from with long rail obtained from srl item No 3 . 3 S&F in replacementLegs made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge.Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 4 M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface ofbed ply wood top complete all as specified & directed by Engineer-in-Charge. Drg : FD-214, FD-215, FD-245, FD-246, 5 TABLE DINING 6 PERSS&F in replacement front rail of dining 6 persons made out of Ist class Hard Wood .complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 6 S&F in replacement side rail oftable dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 7 S&F in replacement Legs oftable dining 6 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 8 M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface oftable dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 9 TABLE DINING 8 PERSS&F in replacement front rail of dining 8 persons made out of Ist class Hard Wood .complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 10 S&F in replacement side rail oftable dining 8 persons made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 11 S&F in replacement Legs oftable dining 8 persons made out of Ist class Hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No. FD-239, FD-273 12 M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface oftable dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 13 TABLE WRITINGS&F in replacementshutter of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg No.FD-275 14 S&F in replacement side and back of cup board of the table writing made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge.Drg No.FD-275 15 S&F in replacementdrawer table writing made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No.FD-275 16 S&F in replacementlegtable writing made out of Ist class hard wood .complete all as specified and directed by Engineer - in – Charge. Drg No.FD-275 17 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable writing complete all as specified and directed by Engineer - in – Charge. Drg : FD – 275 18 SIDE BOARDS&F in replacement Top of side boardmade out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : F-241 19 S&F in replacementSide of side boardmade out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer -in – Charge. Drg : F-241 20 S&F in replacementBackof side board made out of 6mm thick ply wood commercial face both sides ISI markedcomplete all as specified and directed by Engineer - in – Charge. Drg : F-241 21 S&F in replacementDrawerof side board made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg : F-241 22 S&F in replacement legof side board made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : F-241 23 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofside board complete all as specified and directed by Engineer - in – Charge Drg : FD – 241 24 PEG TABLES&F in replacement Top of peg table made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384 25 S&F in replacement leg of peg table made out of Ist class hard wood .complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384 26 S&F in replacement Long rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-236, FD-277, FD-255, FD-383, FD-384 27 S&F in replacementshort rail of peg table made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge.Drg : FD-236, FD-277, FD-255, FD-383, FD-384 28 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable peg complete all as specified and directed by Engineer - in – Charge Drg : FD – 236, FD – 277, FD – 284, FD-383 & 384 29 TEAPOY VERANDAHS&F in replacement Top of Teapoy verandah made out of 18mm thickprelaminated partical board ISI markedcomplete all as specified and directed by Engineer - in – Charge 30 M & L for applying two coat of synthic enamel paint wihite to teapoy Verandha including preparation of surfaces complete all as specified and directedby Engr-in-Change 31 TABLE DRESSING GENTSS&F in replacement mirror of table dressing Gentscomplete all as specified and directed by Engineer-in-Charge. Drg No -FD-230, FD-379 FD/E6/MAP /16 32 S&F in replacementback ply of table dressing gents made out of 6mm thick ply wood ISI marked commercial face both sidecomplete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 33 S&F in replacementTop of table dressing gents made out of 12mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 34 S&F in replacement drawer of table dressing gents made out of 6mm thick plywood commercial face both side ISI marked at bottom & 12mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge.Drg No -FD-230, FD-379 35 S&F in replacement mirror frame of table dressing gents made out of Ist class hard . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-230, FD-379 36 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable dressing gents complete all as specified and directed by Engineer - in – Charge Drg : FD – 230, FD-379 37 TABLE DRESSING LADIESS&F in replacement mirror of table dressing ladies complete all as specified & directed by Engineer-in-Charge. Drg : FD-251, FD-378 38 S&F in replacement 5mm thick sliding glass with aluminium channel (anodised) of table dressing ladies complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 39 S&F in replacementDrawer of table dressing ladies,made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 40 S&F in replacementback plyof table dressing ladies 12mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 41 S&F in replacementmirror frame of table dressing ladies, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 42 S&F in replacementback ply of mirror table dressing ladies 6mm thick ISI marked commercial face both side complete all as specified and directed by Engineer - in – Charge. Drg No -FD-251, FD-378 43 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable dressing ladies complete all as specified and directed by Engineer - in – ChargeDrg : FD – FD – 251, FD-378 44 TABLE CENTRES&F in replacement top of table centre,made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg :FD-231, FD-274, FD-232, FD-278, FD-382 45 S&F in replacement Leg of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge 46 S&F in replacementLong rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278,FD-382 47 S&F in replacement Short rail of table centre, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-231, FD-274, FD-232, FD-278,FD-382 48 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table centre complete all as specified and directed by Engineer - in – ChargeDrg : FD – 232, FD – 278. FD – 235, FD-382 49 TEAPOYS&F in replacement Top of Teapoy made out of 18mm thick prelaminated partical board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified and directed by Engineer - in – Charge. Drg :FD – 235, FD-382 50 S&F in replacement Leg of teapoy, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg :FD – 235, FD-382 51 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface of table teapoy complete all as specified and directed by Engineer - in – ChargeDrg : FD – 232, FD – 278. FD – 235, FD-382 52 TABLE 900X600 with/without drawerS&F in replacement Top of table size 900 x 600 x 760 mm, made out of 18mm thick prelaminated particle board ISI marked alongwith 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge. Drg : FD-223,FD-224, FD-283, FD-284 53 S&F in replacement legand stiffener of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 54 S&F in replacement Drawer of table size 900 x 600 x 760 mm, made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated partical board ISI marked at sides complete all as specified and directed by Engineer - in – Charge.Drg : FD-223,FD-224, FD-283, FD-284 55 S&F in replacement long rail of table size 900 x 600 x 760 mm, made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-223,FD-224, FD-283, FD-284 56 S&F in replacement shortrail of table size 900 x 600 x 760 mm,made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge.Drg : FD-223,FD-224, FD-283, FD-284 57 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable 900 x 600 X 760 MM with or without drawer complete all as specified and directed by Engineer - in – Charge Drg : FD – 223, FD – 224, FD – 283, FD – 284 58 TABLE BED SIDES&F in replacement Top of table bed side, made out of 18mm thick prelaminated partical beading board ISI marked alongwith 4mm Teak wood beading all around complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 59 S&F in replacement Side of table bed side, made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276, FD-248 60 S&F in replacement shelf of table bed side, made out of 12mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276,FD-248 61 S&F in replacement back ply of table bed side made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-276,FD-248 62 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable bed side complete all as specified and directed by Engineer - in – Charge Drg : FD – 276, FD-248 63 TABLE 900X900S&F in replacement legof table size 900 x 900 x 760 mm,made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD-291 64 S&F in replacement rails of table size 900 x 900 x 760 mm,made out of Ist class hard wood .complete all as specified and directed by Engineer - in – Charge. Drg : FD-291 65 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface oftable 900 X 900 X 760 MM compl ete all as specified and directed by Engineer - in – ChargeDrg :FD – 291 66 HAT STANDS&F in replacement mirror of Hat Stand complete all as specified & directed by Engineer-in-Charge.Drg : FD-235, FD-361 67 S&F in replacement Front teak face ply of Hat Stand made out of 4mm thick plywood teak face at one side and commercial face at other side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 68 S&F in replacement Back Ply of Hat Stand made out of 4mm thick ply wood commercial face both side ISI markedcomplete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 69 S&F in replacementBeading 35mm wide, 6 mm thick alround the hat stand made out of teak wood complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 70 S&F in replacement Copper oxide steel pegs 120 mm long of Hat Stand complete all as specified and directed by Engineer - in – Charge. Drg : FD-235, FD-361 71 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofHat Stand complete all as specified and directed by Engineer - in – ChargeDrg : FD – 233 FD-361 72 BOOK CASES&F in replacement Top of Book case size 1065x300x19mm, made out of 19mm thick block board ISI marked with 1mm thick laminated sheet and complete all as specified & directed by Engineer-in-Charge.Drg : FD-45(m), FD-237 73 S&F in replacementshutter of Book case size 1065x300x19mm,made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 74 S&F in replacement shelf of size 380x205x18mm /shelf (size 735x275x18mm) of Book case made out of 18mm thick prelaminated partical board ISI marked complete all as specified and directed by Engineer - in – Charge.Drg : FD-45(m), FD-237 75 S&F in replacement back ply of Book case made out of 6mm thick ply wood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 76 S&F in replacementLeg of Book case made out of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge.Drg : FD-45(m), FD-237 77 S&F in replacement MS Hinges medium weight cold rolled of size 50mm long of book case complete all as specified and directed by Engineer - in – Charge. Drg : FD-45(m), FD-237 78 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofBook Case complete all as specified and directed by Engineer - in – Charge Drg : FD – 45 (M) , FD-237 79 TABLE COMPUTERS & F in replacement of key board fitted with telescopic channelMS drawer slides all shown on drawing . FD/E6/ MAP/03 80 S & F in replacement of Drawer with lock made out of 6mm thick plywood commercial face both side at bottom and 18mm thick pre-leminated particla board at side front and back FD/E6/ MAP/03 81 S & F in replacement of 18mm thick prelaminated particle board pull out tray for mouse on telescopic channel FD/E6/ MAP/03 82 M & L for applying two coat of synthetic enamel paint including preparation of previously treated/oldsteel surface of table conputer complete all as specified and directed by Engineer -in- Charge. 83 S&F in replacementofNylon buffers and PVC Shoes of table computer complete all as specified and directedby Engr-in-Change. FD/E6/ MAP/03 84 ALMIRAH MESS UTENSILS&F in replacement Topof Almirah Mess utensils size 1065x434x19mm, made out of block board ISI marked covered with 1mm thick laminated sheet along with 4mm thick Teak wood beading alround complete all as specified & directed by Engineer-in-Charge.Drg : FD-93 85 S&F in replacement Shelfof Almirah Mess utensilssize 1025x420x 19mm, made out of planks of Ist class hard wood . complete all as specified and directed by Engineer - in – Charge.Drg : FD-93 86 S&F in replacement Back Plyof Almirah Mess utensils size 1065x1570x10mm, made out of 10mm thick plywood commercial face both sides ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD-93 87 S&F in replacementShutter of Almirah Mess utensilsmade out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet comp lete all as specified and directed by Engineer - in – Charge. Drg : FD-93 88 S&F in replacementAluminium handle anodised 100mm long and hasp & staple 75mm long of aluminium anodised complete of Almirah Mess utensils complete all as specified and directed by Engineer - in – Charge. Drg : FD-93 89 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofAlmirah Mess Utensils complete all as specified and directed by Engineer - in – Charge Drg : FD – 93 90 S&F in replacement knob of CP Brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by Engineer - in – Charge 91 PVC RECEPTACLES&F in replacementreceptacle PVC made out of 22 gauge PVCsheet complete all as per drawing complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/13 92 SOFA CUSHIONS&F in replacementof 100 mm thick foam rubber cushion of size 530x560 mm , 32 density duly covered with tapestry cloth for seat and back complete all as specified and directed by Engineer-in-Charge. Note : Tapestry cloth should not be not less than the rate of Rs 300/- per mtr Drg : FD-258 , FD-281 and FD -373, FD-MAP-II Note:- Sample of cloth should be approved by BSO/GE 93 SOFA SET SINGLE SEATS&F in replacement of arm of sofa set single seat made out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II 94 S&F in replacement leg of sofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directedby Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II 95 S&F in replacementside rail (size 100 mm x 35 mm) ofsofa set single seat made out of 1st class hard wood (.) duly melamine polished complete all as specified and directedby Engr-in-Change Drg : FD-258 , FD-281 and FD -373 96 S&F in replacement front railsof sofa set seat made out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II 97 S&F in replacement (seat and back) batten of sofa set single seat made out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-ChangeDrg : FD-258 , FD-281 and FD -373 and FD Map-II 98 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofSofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II 99 SOFA SET THREE SEATERS&F in replacement of arm of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-Change .Drg : FD-258 , FD-281 and FD -373 and FD Map-II 100 S&F in replacement leg of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directedby Engr-in-Change Drg : FD-258 , FD-281 and FD -373 and FD Map-II 101 S&F in replacementside rail (size 100 mm x 35 mm) ofsofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directedby Engr-in-Change Drg : FD-258 , FD-281 and FD -373 102 S&F in replacement front railsof sofa set 3 seatermade out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-Change . Drg : FD-258 , FD-281 and FD -373 and FD Map-II 103 S&F in replacement (seat and back) batten of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polishedcomplete all as specified and directedby Engr-in-ChangeDrg : FD-258 , FD-281 and FD -373 and FD Map-II 104 S&F in replacement bottom rail of seat and back of sofa set 3 seater made out of 1st class hard wood (.) duly melamine polished complete all as specified and directedby Engr-in-ChangeDrg : FD-258, FD-281 and FD-373 and FD Map-II 105 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofSofa set single seater complete all as specified and directed by Engineer - in – Charge Drg : FD-258 , FD-281 and FD -373 and FD Map-II 106 TABLE DINING ORsS&F in replacementmembers of frameof table dining ORs/Forms with or without back such as legs, stiffeners etc made out of M.S. pipe 25 Sqmm (16 gauge wall thickness) including cutting, welding, bending etc providing one coat of red oxide primercomplete all as specified and directedby Engr-in-ChangeDrg : FD-165 (M) 77 (M) 78 (M) 107 M & L for applying two coat of synthetic enamel paint including preparation of previously treated/oldsteel surface of mild steel tube frame of table dining ORs complete all as specified and directed by Engineer -in- Charge. Drg : FD-165 (M) 108 Chair dining cushioned MAPS&F in replacement of Seat cushion of chair dining cushioned, 75mm thick of 32 density duly covered with tapestry cloth complete all as specified and directed by Engr-in-charge.Drg : FD/E6/MAP-II/04 Note :- Tapestry cloth should not be less than the rate of Rs. 300/- per RM. 109 S&F in replacementFront leg and rear leg each of chair diningmade out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04 110 S&F in replacementFront/side/back rail/Stiffener of chair diningmade out of 1st class hard wood . complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP-II/04 111 M & L for melamine polishing on Teak wood, two coats to exposed surface including preparing the surface ofBook Case complete all as specified and directed by Engineer - in – Charge Drg : FD/E6/MAP-II/04 112 Canning of Chair Dining, Chair Easy, Chair Writing and Stool DressingTaking down un-serviceable plastic cane and re-canning with new 2mm wide half round plastic cane except that of border which shall be 3 mm flat superior quality cream / white colour and weaving in accordance to Godrej pattern as shown onDRG NO.FD-03(M),FD-279,FD-229,FD-280 and as applicable complete all as specified and directed by Engineer – in - Charge.(Make of cane : Shah & shah / M/s Premier/Indian Plastic) 113 Chair Wooden BottomS&Fin replacementFront leg and rear leg each of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285 114 S&Fin replacementFront rail/back rail/side rail /stiffener of chair wooden Bottomusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 115 S&Fin replacementback rest of chair wooden Bottom using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 116 S&Fin replacementSeat (Made out of BWR plywood commercial type 6 mm thick ISI marked) of chair wooden Bottomcomplete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 117 M & L forpreparing of all exposed wooden or wood based surfaces of chair woodenwithout arms and applying two coats of Melamine polishcomplete all as specified and directed by Engineer – in - Charge DRG NO.FD-56,FD-285 118 Chair DiningS&Fin replacementFront leg and rear leg of chairdiningusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-279,FD-16 119 S&Fin replacementFront rail/back rail/side rail/stiffener of chair diningusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16 120 S&Fin replacementback rest of chair diningusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-279,FD-16 121 M & L forpreparing of all exposed wooden or wood based surfaces of chair diningand applying two coats of Melamine polishcomplete all as specified and directed by Engineer – in - Charge. DRG NO. FD-16,FD-228,FD-279 122 Chair WritingS&Fin replacementFront leg/rear leg of chair writingusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280 123 S&Fin replacementFront rail/back rail/side rail/stiffener of chair writingusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280 124 S&Fin replacementBack rest of chair writingusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280 125 M & L forpreparing of all exposed wooden or wood based surfaces ofchair writingand applying two coats of Melamine polishcomplete all as specified and directed by Engineer – in - Charge. DRG NO. FD-250,FD-280 126 Chair EasyS&Fin replacementFront leg /Rear leg of chair easyusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201 127 S&Fin replacementArms of chair easy using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201 128 S&Fin replacementRail of seat frame/back frame of chair easy with triangular shape in supporing using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-229,FD-201 129 M & L forpreparing of all exposed wooden or wood based surfaces ofchair easyand applying two coats of Melamine polish complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-229,FD-201 130 Stool Dressing CushionedS&Fin replacementCushion (50mm thick of 32 denasity) with tepastry cloth cover as per existing design of Stool dressing cushionedcomplete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP Note:- Tapestry cloth shall beof superior cloth of costing not less than Rs 275 per meter with 1.25 meter width as apptoved by BSO 131 S&Fin replacementleg/front rail/side railof Stool dressing cushioned using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-282&TP 132 M & L forpreparing of all exposed wooden or wood based surfaces ofstool dressingcushioned and applying two coats of Melamine polish complete all as specified and directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP/14 133 Table dining 1200mm x 900mm x 760mmS&F in replacement leg of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273 134 S&F in replacement Long railand short rail each of table dining, (size 1200mmx900mmx760mm) made out of 1st Class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-273 135 M & L for melamine polishing on Teak wood two coats to exposed surface including preparing the surface oftable dining 6 / 8 persons complete all as specified and directed by Engineer - in – Charge.Drg : FD – 273/ 239 136 DeskS&F in replacementBox of desk made out of 18 mm thick pre-laminated partical board including 4mm thick teak wood beading completeall as specified and directed by Engineer-in-Charge Drg : FD-107 (M) & FD-1021 137 M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk completeall as specified and directed by Engineer-in-Charge. Drg : FD-107 138 Bin MultipurposeS&F in replacement Shutter made out of 18 mm thick prelaminated particle board with piano type hinges as per existing to Bin multipurposeMAP with handle 10mm long complete all as specified and as directed by Engineer-in-Charge Drg : FD/E6/MAP/09 139 S&F in replacementdrawer as per existing and as shown on drg to Bin multipurposeMAP complete all as specified and directed by Engineer - in – Charge.Note :- Tapestry Cloth should not be less than the rate of Rs. 200/-per RM. Drg : FD/E6/MAP/09 140 M&L for applying two coat of synthetic enamel paint (existing paint/silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk completeall as specified and directed by Engineer-in-Charge. Drg : FD-107 141 Form with back/Form without backS&F in replacementseatplank of form without back and form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directedby Engr-in-ChangeDrg : FD-77(M) 142 S&F in replacementback plank of form with back made out of 1st class hard wood including GI nuts, bolts and washers etc and melamine polishing complete all as specified and directedby Engr-in-ChangeDrg : FD-77(M) 143 M & L for applying one coat of synthetic enamel paint including preparation of previously treated/oldsteel surface on frame of form with back complete all as specified and directed by Engineer -in- Charge.Drg : FD-77M) 144 STEEL FURNTIUREAlmirah large steelS&F in replacementlocking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel large complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M)as applicable 145 S&F in replacement3 way locking system made out of 10mm dia Mild steelRod to almirah large steel complete all as specified and directed by Engineer- in- charge. Drg No. FD-67(M) 146 S&F in replacementhandles steel chromium plated suitable for almirah Large steel completeall as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable 147 S&F in replacement G clamps suitablefor re-fixing of shelves of almirah large steel with machine screws complete all as specified and directed by Engineer- in- charge. 148 S&F in replacementshelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of syntheticenamel paint (silver grey) over a coat of red oxide primer of almirah large Steel completeall as specified and directed by Engineer-in-Charge. Drg : FD-67M 149 S&F in replacementPedestals locker steel made out of 1.00mm thick plain blackiron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to almirah large steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M) 150 M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah large steel/almirah steel large MAP inside and outside complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M) 151 Almirah Med steelS&F in replacementlocking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel Med complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M)as applicable 152 S&F in replacement3 way locking system made out of 10mm dia Mild steelRod to almirah mediumsteel complete all as specified and directed by Engineer - in – Charge. Drg : FD-243(M),67 (M) as applicable 153 S&F in replacementhandles steel chromium plated suitable for almirah medium/Large steel completeall as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable 154 S&F in replacementPedestals locker steel made out of 1.00mm thick plain blackiron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to almirah medium steel completeall as specified and directed by Engineer- in- charge.Drg : FD-243(M) 155 S&F in replacement G clamps suitablefor re-fixing of shelves of Medsteel with machine screws complete all as specified and directed by Engineer- in- charge. 156 S&F in replacementshelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of syntheticenamel paint (silver grey) over a coat of red oxide primer of almirah medium steel completeall asas specified and directed by Engineer-in-Charge. Drg : FD-243 157 M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces ofalmirah steel medium completeall as specified and directed by Engineer-in-Charge.Drg : FD-67(M) 158 Locker Bed side steelS&F in replacementPedestals locker steel made out of 1.00mm thick plain blackiron sheet including two coats of synthetic enamel (silver grey) paint over two coats of red oxide primer to locker steel complete all as specified and directed by Engineer - in – Charge.Drg : FD-257 159 S&F in replacementshelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of syntheticenamel paint (silver grey) over a coat of red oxide primer of Locker completeall asas specified and directed by Engineer-in-Charge. Drg : FD-243, FD-257 (M) 160 S&F in replacementhandles alluminium anodised 100mm long D type of locker steel complete all as specified and directed by Engineer- in charge. Drg : FD-257 (M) 161 S&F in replacementhasp & staplealuminium anodised 75mm x 40mm x 3mm thick safety type of locker steel complete all as specified and directed by Engineer-in-Charge. Drg No. FD-257(M) 162 M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of lockersteel completeall as specified and directed by Engineer-in-Charge.Drg : FD-257 163 Table office officer and clerk steelS&F in replacementlocking device of brass bright finish, six lever with keys in duplicate for each lock to drawers/lockers to table office (Officer/Clerk) complete all as specified and directed by Engineer - in – Charge. Drg No. FD-84(M) 164 S&F in replacement drawer of table office (officer) steel made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifiedand directed by Engineer-in-Charge. Drg : FD-84(M) 165 S&F in replacement drawer of table office (clerk) made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primercomplete all asspecified and directed by Engineer-in-Charge. Drg No.FD-84(M) 166 M&L for repairing such as welding, lapping, turning, riveting bolting etc to drawers of table office steel (Officer/ clerk) to make them in serviceable condition complete all as specified and directed by Engineer-in-Charge.Drg : FD-84(M) 167 M&L for running welding in repairs to the steel furniture having thickness 3mm and 25mm to 30 mm in length with gas welding including preparing the surfaces beveling etc as required complete all as specified and directedby Engineer-in-Charge Drg : FD-84(M) 168 M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (officer) steel/ table office clerk steel completeall as specified and directed by Engineer-in-Charge. Drg : FD-84 169 Table 900 x 900 x 760mm M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 900x 760mm) completeall as specified and directed by Engineer-in- Charge Drg : FD-1009 170 Table 900 x 600 x 760mm with & w/o drawerS&F in replacementDrawer of table size 900mmx600mm,made out of 1mm thick PBI sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007 171 S&F in replacement Lock device of table size 900mmx600mm complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007 172 S&F in replacement members of frames of table size 900mmx600mm, made out of mild steel 25mm square tube 16 gauge wall thickness including cutting welding bending etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed by Engineer-in-Charge. Drg : FD-1008 & FD-1007 173 M&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 600) with/with out drawer completeall as specified and directed by Engineer-in- Charge . Drg : FD-1007 & FD-1008 174 Book Shelf Open large/Book case steelM&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of Book shelf open large steel and rack steel adjustable 6 tiers (305mm width) completeall as specified and directed by Engineer-in-Charge.Drg : FD-106 & FD-69as applicable 175 Shoe Rack SteelM&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification, welding of rack and denting etc. of steel surfaces of rack shoe steel completeall as specified and directed by Engineer-in- Charge.Drg : FD/E6/MAP/02 176 Rack 1830 x 760 x 1905mmM&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of rack steel (1830 x 760mmx1905mm ) completeall as specified and directed by Engineer-in- Charge . Drg : FD-129(M) 177 Chair Verandah MAPM&L for applying two coats of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of chair verandah MAP completeall as specified and directed by Engineer-in- Charge Drg : FD/E6/MA P/11 178 Chair CB with and without ArmS & F in replacement seat & backeach ofchair CB steel with arms, made out of Ist class Hard Wood . duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing dulymelamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) 179 S & F in replacement seat & backeach ofchair CB steel without arms, made out of Ist class Hard Wood . duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing dulymelamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) 180 S & F in replacementmild steel flat iron size 25mm x 3mm as in stiffener and welded to frame of chair CB steel with/without armsincluding two coats of red oxide primercomplete all as specified and directed by Engineer - in - Charge. Drg : FD-75(M) 181 S & F in replacement arms ofchair CB steel made to shape as per existing pattern of Ist class Hard Wood . duly black melamine polished and fixed to chair CB steel with arms withsteel screws, 3mm dia complete all as specified and directed by Engineer - in – Charge. Drg : FD – 75 (M) 182 M & L for welding alround to broken MS steel frames of chair CB steel with arm & w/o arm and applying two coats of red oxide primer to the welding point complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) &TP 183 M & L for applying two coats of synthetic enamel paint (silver grey) to steel frame of chair CB steel with arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) 184 M & L for applying two coats of synthetic enamel paint (silver grey) to steel frame of chair CB steel without arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) 185 BED HARDS&F in replacement Head board made out of 18 thick prelaminated particle boardISI marked alongwith PVC beading to sides and top of head board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 186 S&F in replacement Footboard made out of 18mm thick prelaminated particle boardISI marked alongwith PVC beading to sides and top of foot board complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 187 S&F in replacementPVC Shoes for legs of bed hard map complete all as specified and directed by Engineer - in – Charge. Drg No. FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 188 M&L as in replacement of gusset duly riveted with pipe and legs andleg as per existing design with two coats of synthetic enamel paint over a coats ofred oxide primer all as specified and directed by Engineer-in-ChargeDrg FD – 245, FD – 214 , FD – 246, FD/E6/MAP/8(R) as applicable 189 M&L for applying two coats of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of bed hard map completeall as specified and directed by Engineer-in- Charge. Drg : FD/MAP/11/01 190 Charpoy IP Hard TopM&L as in replacement of gusset duly riveted with pipe and legs andleg as per existing design with two coats of synthetic enamel paint over a coats ofred oxide primer all as specified and directed by Engineer-in-Charge Drg : FD/MAP/11/01 as applicable 191 M&L for applying two coats of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of Charpoy IP hard Top completeall as specified and directed by Engineer-in- Charge. Drg : FD/MAP/11/01 192 Charpoy IP folding Hard TopM&L forwelding to broken/craked joint of charpoy IP folding up to 32mm dia x3mm thick by gas welding as per exising design and making good with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer-in-ChargeDrg FD-388(R) 193 M&L charpai IP folding hard top and as in replacement of gusset duly riveted with pipe and legs andleg as per existing design with two coats of synthetic enamel paint over a coats ofred oxide primer all as specified and directed by Engineer-in-ChargeDrg FD-388® 194 Chair ComputerS&F in replacement Seatcushion 75mm thick, 32 density covered with approved quality tapestry cloth of chair computercomplete all as specified and as directed by Engineer-in-ChargeDrg : TP/FD/E6/MAP/01 195 S&F in replacement Back cushion 50mm thick 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01 196 S&F in replacementPedestal assembly as per existing designof chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01 197 S&F in replacement Caster wheel as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01 198 S&F in replacement Hydraulic systemas per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg TP/FD/E6/MAP/01 199 S&F in replacement Arms/Handle as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01 200 Table Bed side MAPS&F in replacementTop of table bed side MAP made out of 18 mm thick prelaminated particle board along with 4mm thick TW beading alround complete all as specified and as directed by Engineer-in-Charge. Drg : FD/E6/MAP/15 201 S&F in replacement back Ply of table bed side MAP made out of 12mm thick plywood commercial face both side ISI markedcomplete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15 202 S&F in replacement upper drawer/lower drawer as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15 203 S&F in replacementSide made out of 18mm thick pre-laminated particle board as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15 204 S&F in replacement mild steel Handle 100 mm long with 02 Nos screw as per existing design of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15 205 Teapoy Verandah MAPS&F in replacement of Top of teapay varandah MAP made out of 18 mm thick prelaminated particle boardalong with 4 mm thick teak wood beading alroundand paint all over the teapoy as per FD complete all as specified and directed by Engineer-in-Charge. Drg : FD/E6/MAP/ 206 S&F in replacement PVC shoeof teapay varandah MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/ 207 Chair Dining JCO/ORsS&F in replacementseat of chair dining JCO/Ors made out of PVCsheet, 4mm thick and weight not less than 0.50 Kg of each seat all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05 208 S&Fin replacementFront leg /Rear leg of chair wooden using 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225, FD-285 209 S&Fin replacementFront rail/back rail/side rail/Stiffener of chair woodenusing 1st class hard wood complete all as specified and directed by Engineer – in - Charge. DRG NO.FD-16,FD-56, FD-225,FD-285 210 M & L forpreparing of all exposed wooden or wood based surfaces of chair dining and applying two coats of Melamine polishcomplete all as specified and directed by Engineer – in - Charge. DRG NO.DRG NO. FD-16,FD-56, FD-225,FD-285 211 Chair Verandah JCO/ORsS&F in replacementseat & back of chair verandah JCO/Ors made out of PVCsheet, 4mm thick and weight not less than 1.850 Kg of each seat and back grooves 90 x 10 mm, 10 Nos. on seat & back all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05 212 M&L for applying two coats of synthetic enamel paint (White) with spray machine including preparation, rectification and denting etc. of steel surfaces of Chair Verandah JCO/OR complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M) and as applicable 213 Chair VerandahTaking down un-serviceable plastic cane and re-canning/ re-weaving with 4mm wide flat plastic cane as shown on DRG NO.FD-19(M),FD-359, FD-256for chair verandah complete all as specified and directed by Engineer – in - Charge. (Make of cane : Shah & shah / M/s Premier/Indian Plastic superior quality) 214 M & L for 3mm thick gas welding to mild steel tubing 19/20mm dia broken leg / frame of chair verandah as shown onDRG NO.FD-19(M),FD-359, FD-256 complete all as specified and directed by Engineer – in - Charge. 215 M & L for preparation of old painted steel surfaces of chair verandah and applying two coats of synthetic enamel paint (As per existing colour) complete all as specified and directed by Engineer – in - Charge.DRG NO. FD-19(M),FD-359, FD-256 216 S & Fin replacementPVC shoe of best qualitycomplete all as specified and directed by Engineer – in - Charge. DRG NO.FD-19(M),FD-359, FD-256 217 S&Fin replacement 10 mm dia mild steel round bar of chair verandahas per existing design complete all as specified and directed by Engineer – in - Charge. DRG NO. FD-19(M) FD-359,FD-256 218 Chair Writing MapS&F in replacement handle with two Nos of nuts and bolts as per existing design of chair writing MAP/Chairconference/ chair visitorcomplete all as specified and directed by Engineer – in - Charge.DRG NO. FD/E6/MAP/12&TP 219 S&F in replacement seat cushion 50 mm thick of 32 density with Tapestry Cloth cover of chair writing MAP/Chair conference/ chair visitorcomplete all as specified and directed by Engineer – in - Charge.DRG NO.FD/E6/MAP/12&TP.Note : Tapestry cloth should not be not less than the rate of Rs 275/- per mtr , Sample of cloth should be approved by BSO/GE 220 S&F in replacementback cushion of chair writing MAP/Chairconference/ chair visitor complete all as specified & directed by Engineer-in-Charge.DRG NO. FD-282&TP,FDE6/MAP 221 Charpoy GI pipe ply topAssembling / tightening of loose socket of charpoy frames with minor repairs complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 222 S&F in replacement galvanized iron elbow(ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 223 S&F in replacement galvanized iron check nut6mm thick (ISI marked) suitable for 32mm bore galvanized iron pipe of Charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 224 S&F in replacement long railmade out of galvanized iron pipe 32mm bore medium grade ISI marked and fixing duly threaded / weldedtogalvanized iron pipe of charpoy complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 225 S&F in replacement short railmade out of32mm bore galvanized iron pipe long railobtained from long railand fixing duly threaded/welded to Charpoy GI pipecomplete all as specified and directed by Engineer-in-Charge.DRG NO. FD-220 226 S&F in replacement leg made out of32mm bore galvanized iron pipe long railobtained from short railand fixing duly threaded/welded to Charpoy GI pipecomplete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 227 M & L for weldingbroken / cracked joints of charpoy galvanized iron pipe 32mm bore (i.e. short rail, long rail, leg etc.) upto 32mm dia x 3mm thick by gas welding as per existing design complete all as specified and directed by Engineer-in-Charge. DRG NO. FD-220 228 S&F in replacement 25 x 3mm flat iron clamp including joint Pati 02 Nos nut each within charpoy with washer made to shape as per existing design and welded to Charpoy GI pipe complete all as specified and directed by Engineer-in-Charge.DRG NO. FD-220 229 School Chair with Hand BoardS&F in replacement seat and back low plast of chairs school with hand board all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05 230 S&F in replacement hand board of chair schoolmade out of 18 mm prelaminated partical board Top openable PVC edging screwed to 25 mm dia holow steel pipe inserted in 20 mmdia MS Rod welded to frame all as specified and shown on drawing and directed by Engineer-in-Charge. DRG NO. FD/E6/MAP/05 231 M&L for frame of school chair and weldingbroken/craked joints of chair school by Gas welding as per existing designcomplete all as specified and directed by Engineer-in-Charge.DRG NO. FD/E6/MAP/05
