Tender For Special Repair To Building No P-269, P-160 And P-64And Laboratory At Rts And Depot Hempur Under Ge (East) Bareilly; 1 Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 2 M&L for PCC type D2 1:4:8 (40 mm greaded stone aggregate)in foundations, filling and mass concrete complete all as specified and directed. 3 M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stoneaggregate) 40mm thick as in floor finishing surfaces of conc topping even and smooth with using extra cement complete all as specified and directed. 4 Supply onlyglass dividing strips ,3mm thick, 38 mm wide laid in position conforming to design pattern complete all as specified and directed. 5 M&L for PCCtype 1:1.5:3 (using 20mm graded stone aggregate) as in flooring complete all specified incorporating an approval metallic floor hardener 4% by weight of cement even and fair laid in panels finished (except metallic hardner) complete all as specified and directed.(Note: Metallic floor hardner will be measured & paid separataly) 6 M&L for 20mm thick wearproof topping as specified incorporating an approval mentalic floor hardener 4% by even and smooth without using extra cement (except metallic hardner), with spike rolling to surface or making expended metal whilst the concrete is green complete all as specified and directed.(Note:Metallic floor hardner will be measured & paid separataly) 7 Supply only metallic floor hardner complete all as specified and directed. 8 M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade A Thickness of concrete slab 100mm complete all as specified and directed. 9 M&L for hardcore of broken stones gauge not exceeding63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including removal of existing loose soil complete all as specified and directed. 10 Dismantling of plain or corrugated Asbestos cement including Nanital or similar pattern roof covering complete all as specified and directed. 11 S&F 6 mm thick Asbestos cementcorrugated for semi corrugated sheetsin roofsfixed with L type and J type hook bolts etc complete all as specified and directed. 12 M&L for asbestos cement two piece adjustable plain wing ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed. 13 Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and directed. 14 S&F rolled mild steel roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. 15 M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 16 M&L for preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described including for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and directed. 17 Dismantling of reinforced concrete in roofs, floors (other than groundfloors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. 18 M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent complete all as specified and directed. 19 M&L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed. 20 M&L for form work to faces of walls retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter for flat surface and rugh finished surfaces of concrete complete all as specified and directed. 21 M&L mild steelTMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming toGrade-I IS-432 (Part -I), including welding new to old (if required) complete all as specified and directed. 22 M&L mild steelstirrups ,5mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming toGrade-I IS-432 (Part -I), including welding new to old (if required) complete all as specified and directed. 23 Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed. 24 M&L for brick work with sub class B bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed. 25 Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and directed. 26 M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or cement concrete surfacesfinishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. 27 M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work finishing the surface even and smooth without using extra cement complete all as specified and directed. 28 M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work finished fair and even using integral waterproofing compound including Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.Note:-Supply only of WPC shall be measured and paid separately. 29 Supply only integral water proofing compound complete all as specified and directed. 30 M&L for three coat of white wash on new plaster surface after necessary preparation of surface complete all as specified and directed. 31 M&L for preparation of newly plastered surfaces of walls priming plastered and other surfaces with alkali-resitant priming paint and applying two coats of cement base paint complete all as specified and directed. 32 Chipping and removal of spalled concrete, cracked, porous and weak concrete up to aa depth of the reinforcement rods or dpht of carbonation whichever is deeper and cleaning of the reinforcement bars and exposed concrete to remove scales by chipping, wire brushing, emery sheets etc to enable the all ides of the reinforcement and application of epoxy bonding agent to exposed old concrete surfaces,. the job shall be carried with contractors own pneumatic chipper/ manually with all required resources, tools and tackel up to the satisfaction of GE complete all as specified and directed.Note:- Payment towards application of epoxy bonding agent shall be paid under respective item. 33 Providing, mixing applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-in-charge, epoxy bonding adhesive having coverage 2.20 Sqm/Kg complete all as specified and directed. 34 Providing and plaing in position mirco concrete as per relevant ASTM/ BS/ IS having comp. strength of min. 45 mpa at 2 days of make PIDILITE/ BASF/ SIKA/ FOSROC or equivalent in coloumns and beams, which shall be pre- packed single component, chloride free, non shrink, free flow, self compacing and mixed as per manufacturers spacification, including required leak proof shuttering, pre-soaking of substrate, manual application or pumping, manpower and tools and tackles complete all as specified and as directed. 35 Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. 36 M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor fininshes completed all as specified and directed. 37 M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded complete all as specified and directed. 38 M&L for machine cut Kota stone as in vertical surfaces such as dado/ skirting, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded over and including 15 mm thick rendering in CM 1:4 finish even and rough complete all as specified and directed. 39 M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work finished even and smooth without using extra cement with using integral waterproofing liquid @ 0.15 Lrtr per bag complete all as specified and directed.Note:-Supply only of WPC shall be measured and paid separately. 40 M&L for rendering 10mm thick in cement mortar 1:4 on concrte surface on ceiling finished even and smooth without using extra cement complete all as specified and directed. 41 Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. 42 Material and labour roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust incl. brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed 43 M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.06 sqm but not exc. 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to matchover and including 15 mm thick screed bed in cement Mortar 1:6 complete all as specified and directed 44 M&L for glazed ceramic tiles coloured of size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to matchthe colour of tiles over and including 10mm thick rendring in CM 1:4 complete all as specified and directed. 45 M&L for light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement Mortar 1:6 complete all as specified and directed 46 M&L for light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in skirting, vertical surface dado and riser etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendring in CM 1:4 complete all as specified and directed. 47 M&L 18-20 mm thick granite of black colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. 48 M&L for 25 mm thick PCC 1:2:4type B0, (using 12.5mm graded stone aggregate) as in floors toreceive surface of tile complete all as specified and directed. 49 M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. 50 M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed. 51 M&L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. 52 M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of60mm thickness, M-35 GradeApproved design, shape, size and colour of top layer complete all as specified and directed. 53 Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqmand removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. 54 Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. 55 S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. 56 S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 57 S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug(b) Middle/style rail : 85x44x1.20mm thick(c) Bottom/top rail : 114x44x1.20mm thick(d) Aluminium beading : 0.7mm thick(e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty(f) Making good of wall surface to match with existing surface complete. 58 S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size.(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 59 S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :45.2x35mm X 1.15 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 60 M&L for powder coated aluminumwindow/ doors grills fixingalong with frame of following specification, grills with opening 69.4mm x 78.2mm grills thickness shall be of 6.4mm x 5.8mm having weight not less than 2.306 Kg/per sqmshape as ordered with frame channel of 34 x 11mm x 1.7mm thick fixed with screw inside of the window complete all as specified and directed. 61 S&F powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i)frame :45.2mm x35mm X 1.15 mm(ii) Aluminium beading - 0.7mm thick(iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. 62 S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy complete all as specified and directed. 63 S&F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. 64 S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. 65 Taking up or down 15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 66 Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. 67 Dismantling of water tanks500 & n exc 1000 and removing to store of all retrieved material complete all as specified and directed. 68 S&F rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe complete all as specified and directed. 69 S&F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe20 mm dia (minimum weight 210 gms) complete all as specified and directed. 70 S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed. 71 S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed. 72 S&F in repair vitreous chinawash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete all as specified and directed. 73 S&F in repair light coloured vitreous china counter top oval shape wash basin white available shape as approvedof550mmx400mm (minimun)on new pre-painted brackets excluding taps but including 32 mm bore waste fittings, brass, chromium plated etc complete all as specified and directed. 74 S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10ltrs capacity complete all as specified and directed. 75 S&F in repair Vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. 76 S&F 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 77 S&F in repair 15 mm bore dia of pipe fancy type, pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipecomplete all as specified and directed. 78 S&F in repair 15mm bore dia of pipe fancy type chromium plated Bib tap complete all as specified and directed. 79 S&F in repair 15 mm bor dia of pipe ,CP brass fancy type, stop cock with long shank & as concealed type/ angular type complete all as specified and directed. 80 S&F in repair 15 mm bore dia of pipe CP two way bib tap complete all as specified and directed. 81 S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified and directed. 82 S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. 83 S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. 84 S&F PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls and replacement old pipe complete all as specified and directed. 85 S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor and replacement old pipe complete all as specified and directed. 86 S&F PVC (SWR) bends of 110 mm bore and any radius complete all as specified and directed. 87 S&F 75mm bore PVC (SWR) bend in any radius complete all as specified and directed. 88 S&F in repair 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. 89 S&F 75mm bore PVC (SWR) junction (single ‘T’) equal or unequal complete all as specified and directed. 90 S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal complete all as specified and directed. 91 Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and complete all as specified and directed. 92 M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed. 93 M&L for 10mm thick plastering in CM(1:4) on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane complete all as specified and directed.Note :- WPC shall be measured and paid separately. 94 M&L for PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) 40mm thick as in padding finishing surface of concrete topping even and smooth with using extra cement complete all as specified and directed. 95 M&L for APP polymeric water proofing membrane, minimum 3mm thick and weighing above 3.0 Kg/Sqm with rich bitumen and select polymers blended to obtain excellent heat resistant& cold resistant , black finish reinforced with non-wovenpolyester matt, with a thermo fusable finish laid over compatible bitumen primer torching overlaps with a propane or a butane gas torch, with a overlap of 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions completed including removal of existing treatment all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, applied@1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. 96 Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed 97 M&L forreinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items). 98 M&L form work to chajja, weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat, complete all as specified. 99 M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified. 100 S&F in repair20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and directed. 101 M&L for complete removal of existing treatmentfrom old brick/concrete surface on wallsandapplying two coat of Oil bound distemper using roller, brushes including in patches over a coat of alkali resistant primerand including 1.50 mm thick cement based wall care putty in two layers with making the surface complete smooth by rubbing etcwith minimum 6 hr interval between any two coatscomplete all as specified and directed. 102 M&L for complete removal of existing treatment on old surfaces by vacuume based sanding machine; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc,and applying Two coats of exterior Acrylic emulsion (Apex)/Equivalent of any colour over one coat of exterior water based wall priming on walls with and including provision of scaffolding required for the treatment to external surfaces of buildingwith required safety measures etc complete all as specified and as directedby Engineer in charge.Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge.Stage 1 : Complete removal of existing treatment.Stage 2 :Priming with exterior water based wall primingStage 3 :1st coat ofexterior Acrylic emulsionStage 4 : 2nd coat of exterior Acrylic emulsion 103 M&L for applying 1mm thick putty for smooth finish on prepared surface complete all as specified and directed. 104 M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. 105 Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/pointscomplete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed. 106 Taking down main switch / MCB DBs including MCBs etc of any size and making good distrbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and as directed. 107 Taking down Geysers and disconnecting water & electric connections, removing to store for keeping in safe custody for BER complete all as specified and directed. 108 Taking down Ceiling fan/Exhaust fan, sealing cable end,dismantling blades and removing fan and blades to store for keeping in safe custody for BER Board complete all as specified and directed. 109 Taking down sub main wiring /service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed. 110 M&L for point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and includingnon metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with frame plate with cover for 01 to 16ways suitable for modular fittings including 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:- (a) One light/fan/exhaust fan/bell point controlled by one modular switch/bell push. 111 All as per above Sch A Item No. 110 but one 3 pin modular socket outlet 5 Amp on the same board with other switch complete all as specified and directed. 112 All as per above Sch A Item No. 110 one 3 pin modular socket outlet 5 Amp independent board complete all as specified and directed. 113 All as per above Sch A Item No. 110 but one 3 pin socket outlet 15 Amp independent board with 2.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor single core cable (Red, Black and green colour) confirming to IS 694:1990 Part-II complete all as specified and directed. 114 M&L for modular switch, 1 way 6 Amp, 1 module complete all as specified and directed. 115 M&L for modular switch, 1 way 16 Amp, 1 module complete all as specified and directed. 116 M&L for modular bell switch 6Amp, 1 module complete all as specified and directed. 117 S&F modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed. 118 S&F modular socket6A/16A, 2/3 pin combined 2 module complete all as specified and directed. 119 M&L for buzzer, ding dong, AC, 230V single pole complete all as specified and directed. 120 M&L for modular stepped type fan regulator, 120Watts - 2 module complete all as specified and directed. 121 S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size complete all as specified and directed. 122 S&F lamp holder (Batten/Angle) PVC/Polycarbonate type with back plate for batten/angle fittings, complete all as specified and directed. 123 S&F for Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating,heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed. 124 S&F LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings complete all as specified and directed. 125 S&F LED light fitting 1 x 10 Watts (T-8), Mirror type with high out put diffuser 2 feet long, 220 Volts, AC decorative type with driver holder and LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and directed. 126 S&F LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts, complete all as specified and directed. 127 S&F decorative wall light fixture made up of Polycarbonate, suitable for 1 x 9 Watts, retrofit LED lamp, B22 base, CITY-2, 220 Volts, AC, complete all as specified and directed. 128 S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. 129 S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 130 S&F GI Bracket made out from GI pipe 25/32mm dia bend to shape as required, 1.2Mtr long fixed on wall with flat iron clamps of size 25 x 4mm - 2 Nos with the help of bolts, nuts, washers etc for fixing of security light fitting complete all as specified and directed. 131 S&F LED flood light fittings 210 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size & IP 65/66 protection complete all as specified and directed. 132 S&F sheet metal enclosures MCB SPN DBs 8 Way, 240 Volts, 50Hz, AC, double door (12) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 200 Amp copper bus bar for phase, complete with din rail, Neutral and Earthing bar, including connection, testing and making good the disturbed surfaces complete all as specified and as directed. 133 S&F miniature circuit breaker (MCB), Single Pole & Neutral 40 to 63 Amp, rating 240V, 10 KA current carrying capacity, C curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. 134 S&F miniature circuit breaker (MCB), Single Pole 6 to 32 Amp, rating 240V, 10 KA current carrying capacity, B curve fixing in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 135 M&L for sub main wiring with two run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 4.0 sqmm (Red and Black colour) and incl drawn through Rigid non-metallic PVC conduit 25mm dia (ISI Marks) including accesssories, one run of single core PVC insulated unsheathed FRLS copper conductor cable 1100 volt grade multistandard of size 4.0 sqmm (green colour) for earth continuity wire and connected of common earth dolly complete all as specified and directed.Note:- One run of Rigid non-metallic PVC conduit 25mm dia, three run of 4.0 sq mm copper conductor cable is measured as one unit. 136 S&F in replacement of wall mounting fans 230 volts. single phase, 50 Hz, 1450 RPM, Oscillating 400 mm sweep suitable for wall mounting, made of metal body, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed. 137 S&F sheet metal enclosure 20Amp SP (2P+E) with Metal plug and socket DBs suitable for protection of appliances like AC/Geysers etc complete with one MCB single pole 20Amps, 240Volts including connection, testing and making good the disturbed surfaces, complete all as specified and directed. 138 S&F sheet metal enclosures MCB SPN DBs 12 Way, 240 Volts, 50Hz, AC, double door (12) suitable for flush mounting and surface mounting, conforming to IP 43 - IK 09 with acrylic door with 200 Amp copper bus bar for phase, complete with din rail, Neutral and Earthing bar, including connection, testing and making good the disturbed surfaces complete all as specified and directed. 139 S&F ceiling fan 1200mm sweep, complete with blades, down rods and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and directed. 140 S&F heavy duty exhaust fan 300mm sweep, made of metal body complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed. 141 S&F water heater storage type, electric,capacity 25 litres.BEE 5 star rated, voltage 230V, 50 Hz, Copper tank including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt, nuts & washers etc, complete all as specified and directed. 142 Taking down old service connection/ UG Cable removing of site complete all as specified and directed. 143 Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc complete all as specified and directed. 144 Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 16 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc complete all as specified and directed. 145 Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables . 146 Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. 147 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 148 M&L for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed.Note :-Only compacted thickness of sand will be measured and paid separately. 149 S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade not less than 0.45 mtr wide for repairing road cut/ footpath complete all as specified and directed. 150 Supply, laying un-reinforced precast concrete cable cover class LV type 1flat size 250mm x 150 mmx 40 mm complete all as specified and directed. 151 M&L for Horizontal directional drilling (HDD) is a streeable trenchless method of Laying (installing) underground cables in a shallow arc along a 40mm/ 50mm bore path by using a surface-launched drilling rig, with minimal impact on the sorrounding area complete all as specified and directed. 152 M&L for GI pipe, light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface complete all as specified and directed. 153 M&L for earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore lightgrade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and directed. 154 Supply, laying, conecting and testing of ISI marked 50 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. 155 Supply, laying, conecting and testing of ISI marked 40 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. 156 Supply, laying, conecting and testing of ISI marked 25 mm bore GI steel water tubing medium grade Including S & F all fittings and fixed complete to walls and celling or laid in floors complete all as specified and directed. 157 S&F 25 mm bore Gun metal globe valve or gate valve with iron wheel head , screwed both ends with 01 No union for iron pipe heavy duty with ISI marked complete all as specified and directed. 158 S&F 50 mm bore Gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No Union for iron pipe heavy duty with ISI marked complete all as specified and directed.
