Provision of drainage line with grilling at kohima line (Block No. 83,84,85 & 86) , Provn of view cutter and connected works at 19 QG and Special repair to Kota stone flooring in Necessary Shed ( Building Number 4) at 64 Coy ASC (Sup) Type C under GE (North) Pune.; 1 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, manholes etc and getting out in any type of soil complete all as specified & as directed. 2 M&L PCC (1:4:8) type D-2 as mass concrete as in foundation, mass concrete work complete all as specified & as directed. 3 M&L for PCC soild block masonry exeeding 10 cm in width built in CM (1:6) of Gde C-1 type 1:3:6 (20mm graded aggregate) complete all as specified & as directed. 4 Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concretesurfaces finished even and smooth without using extra cement all as specified and as directed. 5 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed. 6 Removing the excavated surplus soil exceeding 200m m but n exc. 500 m and depositing out of MoD Land complete all as specified & as directed. 7 Material and labour for Cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping, benching, bed blocks, lintels upto 1.5m clear span and the like including including weathering, slightly rounded or chamfered angles and throating, using necessary form work concrete all as specified and as directed. 8 Material and labour for PCC (1:2:4) type B1 (using 20mm graded broken stone aggregates) as in surface channel and drain complete all as specified and as directed. 9 M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & as directed. 10 M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing;frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. 11 M & L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 12 M & L for designer coloured glossy chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set , jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6)complete all as specified and as directed. 13 Machine pressed precast coloured glossy rubber moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness,of M-35 Grade including 15 mm thick screed bed or bedding layer of cement mortar (1:6)for laying interlocking tiles complete all as specified & as directed. 14 Ditto item no. 13 but except tiles complete all as specified & as directed. 15 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed. 16 Supply and fix tubular Rolled sections as in framing for cladding, glazing and the similar work fixed as columns, posts etc., for structural workcomplete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 gradeSt.-240 Fe 410-W (Gde- - 250)quality-A fixed with cleats/welding/connecting plates complete all as specified and as directed. 17 S&F 50 mm wide and 4-5 mm thick designer aluminium flat patti fixed to iron frame work with coach screw and washer to hold the cladding sheets complete all as per specified and as directed 18 S&F 6 mm thick polycarbonate fibre glass plain sheethollow section fixed with coach screw and washer fixed to iron frame work complete all as per specified and as directed 19 M&L for framed work such asside hung gates, grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walkways; railings; framework ofwater tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed 20 Demolition of cement concrete in ground floors , pavings, sunken floor n exc 15 cm thickness etc (below or above ground level) and rubbish off from the premises complete all as directed. 21 M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dence soil all as specified and as directed. 22 M & L for Hardcore of broken stones or boulders of guage not exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface 23 Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub basecomplete all as specified and as directed. 24 Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed. 25 M&L forMachine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4)laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/steps /slabs complete all as specified and as directed. 26 M&L forMachine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4)laid and jointed with grey cement paste and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillarcomplete all as specified and as directed. 27 M & L for Machine pressed rubber moulded glossy finish precast concrete interlocking paver blockwith gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade in floor/ pavment laid over and including 25 mm thick Crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed.Note:manufacturer test cerificate shall be submitted along with sample. 28 Dismantling of stone masonry in cement mortarand in any position all as directed. 29 M & L stone walling of Random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. 30 - Do- all as per Srl item No. 29 above but except stones 31 Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed 32 Supply and fix aluminium powder coated louvered ventilator with provision of space for exhaust fan using Jindal aluminium section - 20604 or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire an d1.40mm qperture etccomplete all asspecified and directed. 33 Supply and fix aluminiumpowder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutterincludingstainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. 34 Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. 35 Material and labour for preparation of New plastered wall surface and applyingtwo coats of oil emulsion distemper over a coat of alkali reistant primer over a thin layer (1 to 1.5mm) complete all as specified and as directed. 36 M&L for preparation of old plastered surfaces and applying two coats of weather proof exterior emulsion paint (APEX brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge. 37 M & L for cutting of existing 25 mm dia GI water tubing in position for alteration or insertion of booster pump complete all as directed 38 Supply and fix water lifting pump 0.5 Hp single phase suction and discharge, copper wounded stator ( 25 mm x 25 mm ) total head upto 6- 42 mtr, capcity upto 2120 LPH monoblock pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including pressure control switch having ,IP 65 rating,dry running protection with automatic reset NoiselessDesigned for high start/stop per hour Built in thermal protection Make of pressure controller :Btalli,V guard,CRI.Make pumpset Kirolsakar model Jalraj 2 Ultra, Texmo Model SHR2, Wilo Model Mini Prince as approved including necessary electrical connections, GI fittings,GI sheet cover complete all as specified and as directed. 39 Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor2.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts gradeISI-694 markedthrough and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc.for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed. 40 M & L for supply and fixing of 20 amp modular startercomplete with modular plate all as specified and directed.MakeHavells Coral,anchor Penta,Legrand Myrius 41 Supply and fix for 25 mm dia gun metal gate valvewith iron wheel head screwed both ends, ISI marked, fixed to GI pipe complete all as specified and as directed 42 Supply and fix 25 mm GI pipe medium grade including necessary special GI fittings as required at site Make:Tata,Jindal,Zenith 43 M & L for cutting of existing 25 mm dia GI water tubing in position for alteration or insertion of booster pump complete all as specified and as directed 44 Supply and fix water lifting pump 0.5 Hp single phase suction and discharge, copper wounded stator ( 25 mm x 25 mm ) total head upto 6- 42 mtr, capcity upto 2120 LPH monoblock pump type suitable for 230 volts with all necessary fittings including copper cable upto 5mtr.Including pressure control switch having ,IP 65 rating,dry running protection with automatic reset NoiselessDesigned for high start/stop per hour Built in thermal protection Make of pressure controller :Btalli,V guard,CRI.Make pumpset Kirolsakar model Jalraj 2 Ultra, Texmo Model SHR2, Wilo Model Mini Prince as approved including necessary electrical connections, GI fittings,GI sheet covercomplete all as specified and as directed 45 Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor2.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts gradeISI-694 markedthrough and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc.for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed. 46 M & L for supply and fixing of 20 amp modular startercomplete with modular plate complete all as specified and as directed.MakeHavells Coral,anchor Penta,Legrand Myrius 47 Supply and fix for 25 mm dia gun metal gate valvewith iron wheel head screwed both ends, ISI marked, fixed to GI pipe complete all as specified and as directed 48 Supply and fix 25 mm GI pipe medium grade including necessary special GI fittings as required at site complete all as specified and as directed Make:Tata,Jindal,Zenith
