Certain repairs to sunken portion , flooring,plastering, joinery, sanitary fittings,perioidcals and internal water supply incl misc repair works to Md accn in Surakaksha Encalve and Safed Sagar atAFSSR Gurgaon under AGE B/R (A/F) Gurgaon ofGE A/F Gurgaon.; 1 Taking down Shutters of any description exc 1 sq. mand n exc 2 sqm each complete all as specified. 2 Taking down Chowkat or frames with shutters(without taking off shutters from the frames)exc 1.5 but n.exc 4.00 sqm each complete all as specified. 3 Taking down and removing Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames)complete all as specified. 4 Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.Note the area includes in this up to G+5 stories building complete all as specified and directed by Engr-in-Charge. 5 M&L for Brickwork with subclass B bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 incl demoltion of old bricks complete all as directed by Engr-in-Charge. 6 M&L Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished isurfaces even and smooth without using extra cement incl demoltion of existing damaged PCC complete all as spd and directed. 7 M & L forPCC 1:3:6 type C-1 (using 20mm grade stone agg) as in plinth protection even and smooth without using extra cementin ground floor and paving n. exc 5 cm thick c incl demoltion of existing damaged PCC complete all as spd and directed. 8 M&L Glazed coloured ceramic tiles in vertical surfaces 300x450x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface incl dismantling of existing tiles complete all as specified and as directed . 9 M&L 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed . 10 M&L Non skid coloured ceramic tiles 600x600area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4. incl dismantling of existing tiles complete all as specified and as directed . 11 M&L Non skid coloured ceramic tiles 300x450area of each tile not exceeding 0.11 Sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 incl dismantling of existing tiles complete all as specified and as directed . 12 M&L for Kota Stone 18-20mm thick (of any type) work(table rubbed and polished)in steps, jambs, floor, platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing incl dismantling of existing tiles complete all as specified and as directed . 13 M&L Machine cut Granite Stone Slab (Black in colour) 16-18mm thick, fixed on Kitchen Platform, Floor or on Shelves,wall,laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, incl dismantling of existing tiles complete all as specified and as directed . 14 M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry,incl dismantling of existing tiles complete all as specified and as directed . 15 S&F roll formed galvanised prepainted steel section window/ventilater section of frame72x55 mmfixed to wall or concrete surface withMS hold fast (30X5mm section) 150 mm longmade, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 D quality galvanozed as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c Horizontal spacingfixed in MS flat frame (30x5mm) fixed to windows frame with screws,incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc. incl dismantling of old rusted windows complete all as specified and as directed type-4000 series ref drg noCEAF/STD-191/2014 SH1/2&2/2, Make : NCL or equivalent as approved by accepting officer 16 S & F in repairs 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified. 17 S & F in repairs 105x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified. 18 S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing. 19 S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall becovered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail.Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 20 S&F 30 mm thick 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats. 21 S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side. 22 S & F aluminium anodised, barrel tower bolts of extruded section 200mm long and fixed 23 S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed. 24 S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed. 25 S & F for Galvanised mildsteelwire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples 26 S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete 27 Taking up or down steel tubing 15mm / 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairscomplete all as specified. 28 S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge. 29 S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed by Engr-in-Charge. 30 S & F in repairs 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified and directed 31 S & F in repairs 16mm bore brass Elbow, Tee, Adaptor (Male/Female) for connection with CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as specified and directed 32 S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cupfor iron pipe or for brass ferrule and fixed complete all as specified and directed 33 S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and directed. 34 S&F in repair Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. 35 S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type,cast copper alloy,chromium complete all as specified and directed. 36 S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and directed. 37 M & L in repair for hand shower (PVC health faucet) with 8mm dia 1.20 mm lonf flexible tube and wall hook complete all as specified and directed. 38 S & F in repairfor PVC conection 15 mm size with PTMT nuts of length 450 mm long 39 S & F in repair Swivel shower of PTMT any colour forfixing with 15mm pipe. (Minimum weight 40gms complete all as specified and directed. 40 S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) size 350x460x390 with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. 41 S&F Plastic Water Closet SeatCover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. 42 S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. 43 S&F Vitreous China White Squatting Pan of size 580x400mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. 44 S&F PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. 45 S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 400mm x 330mm x 140mmcomplete all as specified and directed. 46 S&F in repairs stainless steel plate rack (wall mounted) of size 600mm x 750mm x 200mm of stainless steel 0.63mm thick with four shelves complete all as specified and directed. 47 S&F in repairs , PVC Cabinet mirror having size 350mmx450mmx120complete all as specified and directed. 48 M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified &directed by Engr-in-charge. 49 M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement.Note the area includs in this up to 4th stories building complete all as specified and directed by Engr-in-Charge. 50 M&L for applying two coat of water proofing compund Dr Fixit Sure Seal on wall without adding water.Apply second coat after 4/6 hrs of Ist Coat, complete all as manufacturer insturction and as directed by Engr-in-Charge 51 M&L for Non-asbestos fiber cement building Boards 6.0mm thick, fixed to walls with rawl plugs and steel screws, complete all as specified and as directed. 52 M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces upto double storey, mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. 53 Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified. 54 M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building complete all as specified and directed by Engr-in-Charge. 55 S&F in repair, Stainless Steel Curtain Rod 25mm dia/bore (as approved) including taking down old curtain rod of any description, complete all as specified and as directed. 56 S&F in repair, 25mm dia Stainless Steel knobs and bracketsnot less than 60mm longto wall with Screws/ securedwith stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old brackets rod of any description, complete all as specified and as directed. 57 S&F, in repair Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed. 58 S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n exc 0.5sqm each pane incl hacking out old broken glass (any thickness) complete all as spd and directed. 59 M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturers instructions), complete all as specified and as directed. 60 M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down andfilling the existing Nails/ Screw Holes, etc. and applying one Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed. 61 M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of white wash on old surface of ceiling complete all as specified and directed. 62 M & L for newplaster surface applying three coat white wash ceiling surface with roller brush complete all as specified and directed. 63 M&L preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface complete all as specified and as directed. 64 M&L preparing new Plastered surfaces of Walls and applying Two Coats of Distemper Oil Emulsion (as approved)complete all as specified and as directed. 65 M&L preparing newly Plastered surfaces of Walls and apply Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturers instructions), complete all as specified and as directed. 66 M&L preparing old Decorated/Treated Plastered surfaces of Wallsand applying one Coat of Weather Coat Exterior Paintwith approved Tint(as per Manufacturers instructions), complete all as specified and as directed. 67 M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. 68 M&L Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed. 69 M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and directed. 70 Taking down cast iron pipes any bore including fittings of anydia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed by Engineer-in-Charge. 71 S&F 75mm bore cast iron pipes single socketed/ ear in any length fixed to walls / trenches with MS Clamp complete all as specified and directed by Engineer-in-charge. 72 S & F 75mm dia CI Bendswith fixed as required complete all as specifiedand as directed 73 S&F 100mm bore cast iron pipes single socketed/ ear in any length fixed to walls / trenches with MS Clamp complete all as specified and directed by Engineer-in-charge. 74 S & F 100mm dia Cast Iron Bendswith fixed as required complete all as specifiedand as directed 75 Demoliation of PCC / sub base in sunken / toilet floor area and removing all WCs/WHB or other fittings carefully and keep it safe till refixing complete all as spd and directed. 76 M&L for 15mm average thick rendering in cement mortar 1:3mixed with WPC ( (Dr Fixit 101LW+ or equivalnet ) in the proportion and as recommned by the manufacturer on concerete surfaces including finishing the surfaces even and smooth without using extra cement andprovide necessary slope towards GI Spouts in CM 1:3 complete all as specified and as directed. (Note : Rate of WPC to be incl in quoted rate.) complete all as specified and directed by Engr-in-Charge. 77 M&L forapplying two layers WPC (Dr Fixit 301 or equivalent) as first layer of slurry @0.488 kg/sqm mixed with acrylic based polymer modified cementitious composite compund 0.253kg/sqmand the secondlayer (same as first layer) shall be applied after allowed to air cure for 4 hours to first layer compelete all as spd and directed. 78 S&F 50mm dia bore GI Pipe 450mm long (light grade) projecting 150mm from outer face of wall and the slope of sunken slab as spouts to drain out accumulated water complete all as spd and directed by Engr-in-Charge 79 M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed 80 Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete.The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts& grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured)complete all as specified and as directed. 81 M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters CLEANED ON DD.MM.YYYY (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed. 82 S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr.complete all as specified and directed by Engr-in-Charge. 83 S&F, in repair factory made PVC kitchen cabinetin required size and fabricated at site made out of 18mm thick having minimum density 600 Kg/ Cum,100% lead free board having one side prelaminated decorative lamination and other side plain sheet.All front edges shall be covered with 1/1.5 mm thick bending tapeas per manufacturer specification. Design / colour as per drawing provided / approved by Engr-in-Charge. All shutters are to be fixed with continous piano Hinges to cupboard. 01 x 100mm aluminum handle and 02 x magntic cathcer to be provided to each shutter using screw of size 35mm x 6mm to complete all as specified and as directed. (Note : :- (a) Rates of all fixing arragement / piano Hinges/ handles/ screws/ magnetic cathcersare to be included in quoted rates.(b) For the purpose of payment only area of board, used in sides, top , bottom, shelves and shutters to be measured. (Make : Ecocell, Rajshree or equvilant as approved by accepting officer). 84 M&L for mirror polishing on marble/ granite/Kota stone/ stone work on floors and skirting/dados or where ever required to give high gloss finish complete all as spd and directed by Engr-in-Charge. 85 Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed 86 Dismantling and refixing of existing PVC tank upto 500ltr capacity incl necessary fittings and arrangement , keep it safe till roof treatment and refix again complete all as spd and directed. (Note : rates are included for all necessary fitting and fixing arrragement of GI fittings ) complete all as specified and directed by Engr-in-Charge. 87 Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as specified and directed by Engr-in-Charge. 88 M&L forPCC type B-0, 1:3:6 (using 12.5 mm graded stone aggregate) as in laying on roof, coping, kerb, finishes complete all as spd and directed by Engr-in-Charge. (Note : Rates are included upto G+5 Storey) complete all as specified and directed by Engr-in-Charge. 89 M&L for 10mm thick rendering in cement mortar 1:3 on concrete surfaces of roof slab / conerete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. 90 M&L APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal&horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminousprimer 0.30 ltr per sqm as per APP manufacturerinstructionsetc complete all as specified and directed by Engr-in-Charge. 91 M&L for(300 mm x 300 mm x 20 mm) PCC roof tiles withon waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, complete all as specified and directed by Engr-in-Charge. (Note : Rates are included upto G+5 Storey) 92 M&L reparing of RCC projection, chajja, roof facia, cellingby scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster1:3 one or two layer as reqd and also used chicken wire mesh as reqdwith or without facia and smooth finishedincl two coats of finished to match with the existing surface at any height and in any situation including necessary form workcomplete all as specified and directed by Engr-in-Charge.. (Note : Rates are included upto G+5 Storey) 93 M&L washed stone grit plaster on exteriorwalls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cement per sqm, top layer 15mm cement plaster with GREY CEMENT 1:1/2:2 (1 GREY CEMENT :1/2 coarse sand : 2 Marble stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushed and water to expose the marble ston chipppings complete all as specified. The groove shall be 15 mm wide and 15 mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden batterns, repair to the edges of panels and finishing the groove complete as per specificatio and direction of the Engr-in- Charge.Note :Rates includes to carried out the workup to G+5 stories building nothing extra shall be admissible on this account. 94 S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified. Note :Rates includes to carried out the workup to G+5 stories building nothing extra shall be admissible on this account. 95 S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.andfixed with L-type or J-type or cranked hook bolts in lieu of screw. Note :Rates includes to carried out the workup to G+5 stories building nothing extra shall be admissible on this account.complete all as specified and directed by Engr-in-Charge. 96 M&L for preparation of newsurface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed.
