Tender for Supply of material, transportation ,design, erection, testing, commissioning for providing S.O.P toGovt. Degree College Matour Under Electrical Sub-Division No-1, HPSEBL Kangra. (SEOP 17/2025-26-250 KVA, 11/0.4 KVA DTR 2 Prov.Distribution Transformer (Ordinary) ,11/0.4 kV 250 KVA, 3 Prov.Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 4 Prov.Muffs with concerete filling Provided by HPSEBL 5 Prov.X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line 6 Prov.MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LAs 7 Prov.X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 8 CT-PT Unit Belting & Knee Bracing 9 X-Arm:[Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos]for CT-PT Unit 10 X-Arm [Channel Iron (100x50x5 mm), Length : (460mm) x 2 Nos for supporting Main Channel of CT-PT Unit] 11 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 12 MS Angle Iron (35X35x6 mm), Length : (460 ) x 2 Nos 13 MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing 14 Prov. CT-PT Combined Unit 11 KV 100/5 Amp 15 Prov.Energy Meter 11 KV HT -/5 Amps 16 PVC Multistrand 4 mm² copper wire with Φ-1 inch GI pipe for concealing 17 Transformer LT Distribution Box and GO Switch fixing Assembly 18 MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 19 MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos 20 GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm 21 GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D typeProvided by HPSEBL 22 D.O Fuse Unit 23 Surge Arrester, 9 kV Station Class(Porcelain Type) 24 Prov Disc insulator ,1 No Disc (12 kV, 90 kN) including Dead End Clamps etc. 25 Stay set complete Provided by HPSEBL 26 Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) 27 Pipe Earthing SetProvided by HPSEBL 28 LT Distribution Panel Box With MCCB(630A, 50KA,3P, 1No) & MCCB (250A, 36KA,3P, 3No) 29 Half Clamp (M.S. Flat 50X6 mm)Provided by HPSEBL 30 Full Clamps (M.S. Flat 50X6 mm) 31 Nuts and Bolts of Various Sizes(with flat and spring washers)] 32 Aluminium Thimble Provided by HPSEBL 33 Copper Thimble Provided by HPSEBL 34 Danger PlateProvided by HPSEBL 35 Barbed Wire 36 LT Cable (3.5 Core) 300 mm² 37 Aluminium Paint. 38 Prov.AAAC 7/3.15mm² Conductor for Earthing 39 Erection charges 40 Transportation charges 41 11 KV H.T Line 42 Prov AAAC 7/3.15mm² Conductor (50mm²) {Includes Cutting and wastage} 43 Prov. Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 44 Prov.Steel Tubular Poles (10 m, Working Load > 300 kgf/m²) 45 Prov Muffs with concerete filling Provided by HPSEBL 46 Prov.M.S C.I X-Arm (1500x100x50x5 mm),Long For Single Pole 47 Prov.M.S A.I X-Arm (1800x50x50x6 mm),Long For Single Pole 48 Prov M.S A.I X-Arm (50x50x6 mm), Length (2x750) mm Long For Single Pole 49 Prov M.S A.I X-Arm (50x50x6 mm), Length (2x600) mm Long For Single Pole 50 Prov.M.S C.I X-Arm (2400x100x50x5 mm),Long For Double Pole 51 Prov.M.S A.I X-Arm (2700x50x50x6 mm),Long For Double Pole 52 Prov.M.S C.I X-Arm (2400x75x40x6 mm),Long For G.O Switch &D.O.Fuses 53 Prov Belt Set - MS A I 50x50x6, Length [2400 mm x 2 No.] For Double Pole 54 Prov X-Bracing Set - MS A.I Iron 50x50x6,[2700 mm x 2 No.] For Double Pole 55 Prov 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN) 56 Prov Disc insulator ,1 No Disc (12 kV, 90 kN) including Dead End Clamps etc. 57 Prov Stay set complete in all respectProvided by HPSEBL 58 Prov Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set) 59 Prov HT Earthing set complete Provided by HPSEBL 60 Prov Double Continous Earth wire (GI, 8 SWG) @ 0.102 kg/m 61 Prov Danger Plate (250X200X1.6 mm)Provided by HPSEBL 62 Prov Nuts and Bolts of Various Sizeswith flat and spring washers 63 Prov Barbed Wire 64 ProvAluminium Paint 65 Prov Full Pole Clamps (M.S. Flat 50X6 mm)Provided by HPSEBL 66 GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D typeProvided by HPSEBL 67 D.O Fuse Unit 68 Prov. plinth for Four polestructure complete i/c excavation of pit, Boulder Filling Upto Ground Level and making plinth of C.C. 1:5:10, 69 Erection charges 70 Transportation charges 71 3-Phase L.T Line 72 Prov. L T AB Cable 3x120+16+70 73 Prov. Steel Tubular Poles 9 m Long 74 Prov.Muffs with concerete filling (1800 mm) Provided by HPSEBL 75 Prov.M.S C.I X-Arm (1500x100x50x5 mm),Long For Single Pole 76 Prov M.S A.I X-Arm (50x50x6 mm), Length (2x750) mm Long For Single Pole 77 Prov.LT Stay Set Provided by HPSEBL 78 Prov.Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) 79 Prov.Nuts and Bolts of Various Sizes 80 Prov Half Pole Clamps (M.S. Flat 50X6 mm) 81 Prov Full Pole Clamps (M.S. Flat 50X6 mm) 82 Prov.Aluminium Paint 83 Prov.Earthing Set complete Provided by HPSEBL 84 Prov.Anchorimg Assembly 85 Prov.Suspention Assembly 86 Prov. Façade Hook 87 Transportation charges 88 Erection charges 89 Civil Work 90 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 91 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) 92 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 93 Providing and laying cement concrete 1:2:4( 1 cement, 2 sand, 4 graded stone aggregate 20mm NS) and curing complete in plinth and foundation 94 Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. 95 Centering and shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 96 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 97 Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers. 98 Painting (two coats) excluding priming coat onnew steel and steel based surface after and i/c preparing the surface by thoroughly cleaning, oil, grease, deit and other foreign matter sand papering and stopping with ready mixed paint other than white 99 P/F oxidised M.S. sliding door bolt anodized colour & shade with bolts & nuts screws etc. complete (250*16mm) 100 P/F oxidised M.S. handle with necessary screws etc. complete (125mm) 101 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.
