Tender For Maintenance & Repair Of Stp And Sewage Pump Installation Replacement Of Parts Under Ge (East) Bareilly; 1 Dewateringandpumpingoutofexistingaccumulatedsewage/sludgeat STP MHof Capacity 150 KLDfromTube Settler tankby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, including removingduck mediaand followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls after that replacing of duck media with new as per existing complete all as specified and directed. 2 All as per Srl item No.1 here-in-before but STP 80 OR of Capacity 90 KLD 3 All as per Srl item No.1 here-in-before but STP42 Map and Lal Phatak of Capacity upto 461 KLD 4 All as per Srl item No.1 here-in-before but STP JRC of Capacity01 MLD. 5 Note for item no. 1 to 4 :- (a)The followings are deemed to be included in the rate quoted.(i) The disposal of accumulated/deposited sludge after dryingoutsidethedefence landtoa distance exceeding1.5 KM and notexceeding 5.00KM fromthe STP. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge bemade and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days.(iii) Cutting and rewelding of supporting MS frame structure.(b)Replacement of unsv rusted portion of supporting MS frame structure. The cost of MS frame will be measured and paid separately 6 DewateringandpumpingoutofexistingaccumulatedsewagefromChlorine Contact Tank and Treated Water Tank at STP 80 OR of capacity of 90 MLDby manullay or using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note :- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP.(iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. 7 All as per Srl item No. 6 here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed 8 All as per Srl item No.6 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 9 All as per Srl item No.6 here-in-before but STP 42 Map , Lal Phatakof Capacity 461 KLD complete all as specified and directed. 10 DewateringandpumpingoutofexistingaccumulatedSludge and Water from Sludge Holding Tank at STP 80 ORs of Capacity of 90 KLDby using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:- (i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account. (ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. 11 All as per Srl item No.10here-in-before but STP MHOR of Capacity of 150 KLD complete all as specified and directed. 12 All as per Srl item No. 10 here-in-before but STP JRCof Capacity 01 MLD complete all as specified and directed. 13 All as per Srl item No. 10 here-in-before but STP 42 Map& Lal PhatakSTP of Capacity 461 KLD complete all as specified and directed. 14 DewateringandpumpingoutofexistingaccumulatedSludge and mud including cutting of grass, bushes, plant growth fromSludge Drying Beds at STP under GE East bareilly by using external sewage disposal pump sets to near by sewagedisposaldrainandcleaningof tanksby scrapping with wire brush or any other means on walls and bottom of tank and removing the sludge / silt / sand / fungus etc deposited inside the sumps / tanks with buckets and depositing where directed, followed by cleaning with bleaching water solution and fresh water and finally applying one coat of snow cem on internal and external surfaces including writing the date of cleaning and due date of cleaning in white colour on black background on external walls complete all as specified and directed.Note:-(i) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe STPcost of which shall be deemed to enclusive in the quoted rate and nothing extra shall be paid on this account.(ii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at STP in order to complete the work in max 02 days. (iii) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in STP. (iv) Cleaning of sludgetransfer line from tube settler tank to Sludge holding tank 15 Supply and fix in replacement of Glass tube type Air Rotameterincluding taking down existing unserviceable Air Rotameter of any description complete all as specified and directed.Make: Flowstar / Microflow / Aster 16 M&L forreplacement of Unsv MBBR Mediafrom the tank and supply of filling Fresh media of MBBR Media in the main reactor as specified of existing /suitable Make with the following specificatios:-Effective surface area of media Approx - 400 Sqm/Cum(b) Mesdia ht Approx - 15/10 mm(c)Media dia Approx-22 mm(d) Weight per unit surface area approx -22 mm(e) Voidage - >093 gm/Cucm(g) Media fill Range - 25-55% of volume 17 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity ofupto 01 MLDand complete over hauling of filter press including testing complete all as specified and directed. 18 S&F in replacement, heavy duty cloth strips of filter press as per existing frame of capacity of 150KLDand complete over hauling of filter press including testing complete all as specified and directed. 19 Supply and fixed in replacement, connecting and testing of(non return valve ISI - 5312) CI of 150 mm sizes bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers complete all as specified and directed. 20 Supply and fix in replacement of CI Butterfly valve of following size as per IS 13095, PN 16, wafer type without lugs, suitable for clamping between flanges as per ANSI B 16.1 CI-125, including flanges, fittings, gasket, nuts,bolts,washersetc.includingtakingup/downofexistingunserviceablebutterflyvalveofanydescription complete of size 50 mm all as specified and directed.Make : Leader / Crawley / Audco / L&T / Zoloto 21 All as per Srl item No.20 here-in-before but 100 mm completeall as specified and directed. 22 All as per Srl item No.20 here-in-before but 150 mm completeall as specified and directed. 23 Material and labour for M.S. Black Pipe of size 80mm bore, plain end as per IS:1239 (I), nominal bore, heavy Grade (C class)with all fittings like elnow, tee reducer, flange nut bolt with washer including cutting, welding and joining etc as per site requirement and applying two coats of syntheticenamelpaintofapproved colourover acoat ofred oxideprimer includingtaking up/ downof existing unserviceable pipe of any description complete all as specified and directed.Make : Tata / Jindal / Prakash Surya. Note:- fixing of pipe line will be carried out on wall or floor and cost of the same will be deemed to be included in tthe rate quoted however for the pipe line laid under ground by digging trench will be paid saperately. 24 All as per Srl item No.23here-in-before but 100 mm completeall as specified and directed. 25 All as per Srl item No.23 here-in-before but 150 mm completeall as specified and directed. 26 All as per Srl item No.23 here-in-before but 50 mm mm completeall as specified and directed. 27 M&L for Structure Steel Work, made out of godquality-A Rolled Mild Steel Chaneel, Angle or Tee Sections, MS Sheet with hinges & looking arrangements et. Cut to shape / ordinary length, drilled and counter sunk for screws / Bolts, including bending and welding duly painted with 2 coats of anticorrosive synthetic enamel paint over a coat of Zinc Chromate as in framed work with MS Sheet cover complete all as specified and directed. 28 M&L for complete overhauling and repairing of multi-grade sand filter and carbon filter unit with replacement of filter media as per existing and activated carbon filter media including replacement of filter media including other connected assessories as required at site of STP JRC capacity of 1 MLD including testing and wire mesh size shuold as per existing, colour in Black, Grade of GAC8x30 and bulk density approx 450kg /cum, Hardness (abrasion number) approx 95-99 and PH value - 7 complete all as specified and directed 29 All as per item Ser No. 28 here-in-before butSTP 80 (OR) capacity of 90 KLD completeall as specified and directed. 30 All as per item Ser No. 28 here-in-before butSTP MH capacity of 150 KLD completeall as specified and directed. 31 All as per item Ser No. 28 here-in-before butSTP No. 42 and Lal Phatakcapacity of461/500 KLD completeall as specified and directed. 32 M&L for cleaning, scrapping out side of vessel properly including painting with one coat zinc chrome primer & two coats of best quality synthetic enamel paint etc. complete all as specified and directed 33 M&L for servicing / maintenance of air compressor 415 volts 50 Hz motor complete with cleaning of air tank incl replacement of all defective parts and lubricating oil complete all as specified and directed.Note:-Spare parts will be measured and paid under relevant item separately.All minor consumables incl T&P and Tpt required shall be deemed as included in the rates quoted. 34 Supply only rotor roller machineing and alignmentcomplete all as specified and directed. 35 Supply only all packingfor casing complete all as specified and directed. 36 Supply only air filtercomplete all as specified and directed. 37 Supply only O-Ring complete all as specified and directed. 38 Supply only oil seal complete all as specified and directed. 39 Supply only Gear wheel pair complete all as specified and directed. 40 Supply only lock nut complete all as specified and directed. 41 Supply only lock washer complete all as specified and directed. 42 Supply only ball bearing No. 2211 complete all as specified and directed. 43 Supply only ball bearing No. 3211 complete all as specified and directed. 44 Supply only ball bearing No. 6211 complete all as specified and directed. 45 Supply only V belt complete all as specified and directed.Make Fainiyar 46 M&L removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, dismantle/open, removing the burnt winding, cleaning of rotor / stator, re-winding the motor with F Class insulation super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying incl replacement of both water seal, compound, both bearing, fill with new lub oil etc. re-assembling the pump set, installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 47 All as per Srl item No. 46here-in-before but more than 7.5 HP and upto 10 HP. 48 All as per Ser item No. 46here-in-before but more than 11 HP and upto 15 HP. 49 M&L for removing the submersbile pump set from existing position, Shifting to authorised workshop for repair work, overhauling and servicing of submersible pump set with motor incl replacement of unsv nuts, bolts & washers, seals, packing, opening of delivery casing volute for checking of non clog type impeller checking & replacement of stuffing box unit seals and match seal housing /casing cover for checking/filling of suitable grade lubricating oil upto required, checking of seat & replacement of seat ring, checking for smoothness of motor runnning and clearance between impeller and casing ring and casing cover, greasing of flower bearing of pump set, incl cleaning of 3 phase electric submersible squirrel cage induction motor in water tight housing testing it for its water tightness by air for its joints incl replacements of unsv parts as required re-assembling the pump set, installing back to the original position testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed.Note :- 1. Spares parts will be measured and paid under relevant items separately all minor consumable/Eqpt/Tpt required shall be deemed as included in the rates quoted2. Note : Rate quoted shall deemed to be inclusive ofdraining out the sewage water from collection tankfor taking out the unserviceable motor and pump including lowering and lifting 50 All as per Srl item No. 49 here-in-before but more than 5 HP and upto 10 HP complete all as specified and directed. 51 All as per Srl item No. 49 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 52 Supply only Non Clog impeller suitable for and upto 5 HP submersible pump set complete all as specified and directed. 53 All as per Srl item No. 52 here-in-before but more than 5 HP and upto 10HP complete all as specified and directed.. 54 All as per Srl item No. 52 here-in-before but more than 10 HP and upto 15 HP complete all as specified and directed.. 55 Supply only upper/lower or back to back roller or Ball bearing suitable for and 3 HP to 15 HP non clog submersible pump set complete all as specified and directed.Make FAG/SKF 56 Supply only Mechinical seal carbonite25 mm suitable for and upto 3 Hp to 5 HP non clog submersible pump set complete all as specified and directed 57 Supply only Mechinical seal carbonite33 mm suitable for and 7.5HP to 20 HP non clog submersible pump set complete all as specified and directed 58 Supply only oil seal2 HP to 5 HP non clog submersible pump set complete all as specified and directed. 59 M&L for dismantling and removing the motorof the mono block / coupled Pump set or Air Compressor from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding cleaning rotor/stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding incl insulate packing materials, Varnishing, Drying etc inclinstalling back to the original position, testing and commissioning on full load for 4 hrs continuous running for the motor cap of motor upto 5 HP complete all as specified and directed. 60 All as per Srl item No. 59 here-in-before but more than 5 HP and 10 HP completeall as specified and directed.. 61 All as per Srl item No. 59 here-in-before but more than 10 HP and upto 20 HP completeall as specified and directed.. 62 M&L for Dismantling and removing the mono block / Coupled pump set from the existing position after disconnecting the inlet/outlet pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, opening the pump side, servicing the pump set including cleaning the shaft including replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the capacity of pump upto 5HP complete all as specified and directed.Note: Spares parts will be measured and paid under relevent item separately. Allminor consumables / Eqpt /Tpt required shallbe deemed as included in the rates quoted. 63 All as per Srl item No. 62 here-in-before butmore than 5HP upto 10HP complete all as specified and directed. 64 All as per Srl item No. 62 here-in-before butmore than 10HP upto 20 HP complete all as specified and directed. 65 Supply only Ballbearing of suitable size for and upto 5 HP mono block / Coupled pump set. Make: SKF / NBCcomplete all as specified and directed. 66 All as per Srl item No. 65 here-in-before butmore than 5HP upto 10 HP complete all as specified and directed. 67 All as per Srl item No. 65 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 68 Supply only brass bush of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 69 Allas per Srl item No 68 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 70 All as per Srl item No. 68 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 71 Supply only new impeller of suitable size for and upto 5 HP mono block / Coupled pump set complete all as specified and directed. 72 All as per Srl item No. 71 here-in-before butmore than 5 HP upto 10 HP complete all as specified and directed. 73 All as per Srl item No. 71 here-in-before butmore than 10 HP upto 20 HP complete all as specified and directed. 74 M & L in repairs for Gland packing of thickness upto 14mm complete all as specified and directed. Make: Spitmaan Graflon / Charminar / Champion 75 M&L in repairs Air Cobe, suitable size for mono block / Coupled pump set, made outof brass, as per site complete all as specified and directed. 76 M&L for cleaning and desiIting the sewage intermediate well of any capacity, dewatering the complete well,removing allthe deposited sludge, soil and other material from the well including bailing / pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including writing Tank cleaned on ......(date) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed.Note:-(i) Contractor is to arrange own diesel pump, T&P etc for cleaning purpose and minor spares and consumable like small screws, washers, cleaning agents consumables etc is deemed to be included in the cost, the unit rate quoted deemed to be include all safety precautions to be taken while working in Lift well.(ii) The accumulated/deposited sludge after drying shall be disposed offoutsidethedefence landtoadistance exceeding1.5 KM and notexceeding 5.00KM fromthe Lift wellcost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid on this account. (iii) Before commencement of work, necessary arrangement for disposal of sewage/sludge be made and work to be carried out in fast pace by deploying more man power at lift well in order to complete the work at the earliest. 77 Allas per Srl item No 76 here-in-before but Collection tank ofSTP JRC complete all as specified and directed. 78 Allas per Srl item No 76 here-in-before but Collectiontank ofSTP MH complete all as specified and directed. 79 Allas per Srl item No 76 here-in-before butcollection tank of STP 80 Ors complete all as specified and directed. 80 Allas per Srl item No 76 here-in-before butcollection tank of STP 42 Map& Lal Phatak complete all as specified and directed. 81 M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS pipes with one coat of black Japan paint over a coat of Zync Chromate complete incl its MS supports / clamps / nuts / bolts and marking / writing flow arrows and name with white paint by skilled painter Allas directed of 150 - 200mm dia complete all as specified and directed. 82 All as per Srl item No. 81 here-in-before but80 to 100 mm dia complete all as specified and directed. 83 All as per Srl item No.81 here-in-before but 50 mm dia complete all as specified and directed. 84 All as per Srl item No. 81 here-in-before but 25mm dia complete all as specified and directed. 85 S&F in repair and connect, MCB SP 6 to 32 A, AC, 240V, ISI Marked complete all as specified and directed. 86 S&F in repair and connect, Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed. 87 S&F in repair and connect, Isolator 4P, 63A, AC, 415V, ISI Marked complete all as specified and directed. 88 S&F in repairs and connect, Single Phase Preventer suitable for motor protection complete all as specified and directed. 89 S&F in repairs and connect, NO-NC auxiliary contact block suitable for 20 to 40A 3 phase contactors complete all as specified and directed.. 90 S&F in repairstimer suitable for starter complete all as specified and directed. 91 S&F in repairs and connect, over load Relay 3 Phase, 415V, 25 Amp to 40 Amp complete all as specified and directed. 92 S&F in repairs and connect, DOL starter suitable 2 to7.5HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. 93 Allas per Srl item No 92 here-in-before butfor more than 7.5to15HP complete all as specified and directed. 94 S&F in repairs, fully automatic star delta motor starter suitable for 15/ 20HP pumpset, 3 phase, 415 V with relay of suitable rangeincl enclosure complete all as specified and directed.Make : L&T, model No. ML- 4FASD or equivalent of C&S / Legrand complete all as specified and directed. 95 S&F in repairs, 3Pole MCCB 25 -100 Amp, 50 Hz, 415 V with rupturing capacity 18KA with Thermal - Magnetic Release. complete all as specified and directed. 96 All as per Srl item No 100 here-in-before but 4 Pole100-200Amps. 25KA complete all as specified and directed. 97 S&F in repairs, testing Volt meter 0-500 Volts complete all as specified and directed. Make: AE/ Rishab/Meco/Enercon. 98 S&F in repairs, Pressure Gauge, 100/80 mm dia, 0 - 100 lb/Sq inchpressure rating complete all as specified and directed. Make: Lub / Meco / H Guru / Pfizer 99 Supply and fixing ofnon clog sewage submersible pump set, 3HP, 3Ø, AC, 4150V,25 Mtr Head complete all as specified and directed. Make: CG/ Kirloskar / KSB 100 Supply and fixing ofnon clog sewage submersible pump set, 2HP, 1Ø, AC, 240V,complete all as specified and directed. Make: CG/ Kirloskar / KSB 101 Supply only DWPE (Dewatering Polyelectrolyte) powder, pack of 10/25Kg in polythene bags / HDPE drums complete all as specified and directed 102 Supply only AQUAFIT-CHLORINE-65%-70% (Calcium based granular disinfectant for water treatment, more stable than Chlorine gas, and stronger than Bleaching powder, and sodium Hypochlorite) in 45 kg Drums complete all as specified and directed.Make : Sree Rayalaseema HI-Strtength HYPO LTD . 103 Supply only Calcium Hydro-Oxide (Lime, 80-85%) in Powder form as pH Booster for STP water, packing in 40 Kg Packs complete all as specified and directed. 104 Supply only Ortho Tolidin solution for testing of dissolved chlorine in water complete all as specified and directed 105 Supply only Chlorination testing glass test Tube kit complete all as specified and directed 106 Supply only Alum Ferric(Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm Max and arsenic 6 ppm Max) confirming to IS-299/2012 (Revised) as amended upto date complete all as specified and ddirected by Engineer-in-Charge.(Note :- The Alumino Ferric Sulphate shall be supplied in superior quality bricks (slabs) as per IS specifications.Manufacturers Name/trade mark shall be engraved on each brick (slab) in addition to marking of relavant clause of IS specification). 107 M&L for replacementfilteration media of sixdrying bed with ten layer of sand gravals and stone gravels as per existing all as specified and directed 108 Supply only bacteria culture areobicin 30 Kg of drum complete all as specified and directed. 109 Supply only DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed. 110 Supply only molassesfor day to day use in Sewage treatment plant complete all as specified and directed. 111 Supply only PAC (Poly Aluminium Chloride AC 1005 in organic soluable Polymer Powder packed in 25 Kg Poly bags completed all as specified and directed. 112 M&L for testing of treated sewage water from out letof chlorine contact tank once in every threemonths from NABL accredited authorized lab as per IS 3025 forrecording essential parameters such as BOD, COD, PH, suspended solids and total dissolved solids complete for STP JRC , 80 OR,MH and 42 Map and Lal Phatak all as specified & directed. 113 Supply only compressor oil 320 grade complete for top up oil levelall as specified and directed . 114 Supply and fix in replacement u/s selector switchcomplete 230 volt complete all as specified and as directed. Make L&T/Kaycee 115 Supply & fix in repairpush buttonswitch with mounting adaptor complete 230 volt complete all as specified and as directed. Make-L & T/Kaycee./BCH 116 M&L for cleaning panel bdbusbar and de carbounising of panel board and replacement of unsv parts including wiringand testing complete all as specified and as directed. 117 M&L for taking outunserviceable Air diffuser andreplacement with new one air diffuser complete as per existingall as spefified and directed 118 M&L for complete overhauling and repairing of cake formation Machine and airCompressor of capacity upto 5 HPand all the connection of chemicalmixerincluding other connected assessories as required at site for STP JRC Capacity of 1 MLDas specified and directed.Note:- 1. Payment will be made aftertesting of forming of cake 119 Supply and fixing ofFilter press Plate as per existing size in Cake formation machine complete all as specified and directed 120 Supplying and fixing in repair Switch Gear Change over of 400 Amps 3 Pole 415 volts complete all as specified and directed 121 Supplying and fixing Contactor 40-50 Amps3 phase Volts all as specified and directed 122 M&L for taking out floating wasteplastic and other particles from collection tanks of STPs as and when required and directed by Engr-in-charge and disposing them out of the cantonment area in waste dumping area 123 M&L for Disconnection flange of MS pipe and replacement of rubber packing to arrest the leakage of 50mm to 100 mm all as specified and directed 124 Supply and laying or fixing or passing throughpipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed mmnominal cross section inservice connections of 3 core of 10 sqmm stranded conductor type. 125 M&L for Cleaning ,sweeping, ofopen area of STP JRC and furniture yardSump, 42 STP, MH STP, 80 OR STP includingcleaning of installed machinary at both STPs and Cleaning / Cutting of bushes , grass, vegetation trimming of tree branches , surface dressingof STPopen area , Drying Bed, open drain, and removing the wasteoutside the cantonment areaNote : Rate quoted shall deemed to be inclusive of leveling the uneven surface using suitable machine or manually as per ground requirement and spreding weed killerafter cleaning on complete area usingspray machine 126 Taking out of booster pump from foundation/electric motor manually ormachnically and transporting to workshop for repair and back to site incl reinstallation refixing and reconnecting after necessary repair complete all as specified and as directed. Note :- Repair/Replacement of unserviceable parts will be measured and paid under relevent items 127 S&F in repair of Star coupling suitable for 2HP multi stage pump set, complete all as specified and as directed.MAKE:- NE or equivalent as approved by GE 128 S&F in repair of GM impeller for booster pump motor ,3 phase 415 v, 2HP/3HP capacity complete all as specified and as directed. 129 Supply, installing, testingand commissioning Factory made outdoor LT feeder piller box, double door type of suitable size, padestal mounted, CPRI approved totally enclosed, dust and vermin proof, Front and rear openable type made of 3 mm thick CRCA sheet and having proper locking arrangement duly paintedto both internal and External surfaces with super enaleled paint over a coat of red oxide and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising ofthree phase copperbusbarr of current carrying capacity 200 Ampsmounted on angle iron legs of size 50 x 50 x 6 mm x 80 cm long embedded inPCC 1:3:6,including excavation / preparation of ground complete connecting UG cable with cable glands of suitable size Make :SMS Panels and Switch Gears/ Universal switch gears Control and equivalent 130 ( a)3 pole power contactor type ML 4 suitable for operation on,440 Volts, AC, 50 Hz-06 Nos(b) over load protection relaywith relay range 45-75Asuitable for operation on 3 phase, 415 V-02 Nos(c)voltmeter three phase anologue typeclass 1 voltage range 0-500 V flush mounting 96x96mm(d)ammeter three phaseanologue type 5A class 1 ofrange 0-200 A flush mounting 96x96mm inculding CT 200/5(e)MCCB 100A , 25 KA Adjustable type 3 pole for 415V -02 Nos(f) Supply and fix in repair MCCB 200 A capacity 4 pole, 35 KAfor 415V -01Nos(g) indicating lamp on all 3 phases R Y B -01 set(h) PVC insulated multistranded copper conductor single core cable 4 sq mm (Nominal cross sectional area) as per site requirement including suitable size of copper lugs etc all as specified and directed-01 Job(j) single phase preventer direct mounting type with relay range 28-40 A 230 Volts suitable for electric motor of water supply installation-02 Nos(k)Electronic timer type ST 100 suitable for operation on 240/360/415 volts 50 Hz for 3-10 Sec-02 Nos.(l) Automatic phase corrector 131 Supply and fix in repair energy saving and environemntal friendly long life versatile pressure die-cast aluminium IP-65 roadway luminaire 72W LEDfitting with high power LEDs light source and electronic driver etc complete as specified and directed 132 Supply and fix 35 W new generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aestheticallydesigned with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. clear cover offers bright illumination for different applications. 133 S & F in replacement of street light brackets 40 mm bore GI pipe medicum grade upto 1.5 mtr long bend to shape including flat iron clamps and sutable nuts and bolts .etc complete all as specified and directed 134 M&L forshifting and emptying chlorine Gas cylinderof any size and capacityby trained and experience personnel in handling the chlorine gas incl taking all safety measuresandappropriate tools andeqptrequired to safeguard the area and technician while emptying the cylinderand arranging all material and chemicalto neutralize the chlorine gas incase of leakage complete all as specified and directed 135 S&F Bldg Security light energy efficient 1X20 Watt LED 6K Endura cityliner leaf (with Toughned glass) die cast aluminium and fixing arrangement of fitting including 1 mtr 35/50mm GI 90 degree bend pipe complete all as specified. 136 M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plateupto external faceof the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia@ 150 mm c/c both ways with 10 mm dia mild steel bars as in liftinghandle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt). 137 Supply fixing testing and commissioning copper submersible cable flat 16 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 138 All as per item ser no. 137here-in-before but of size 6 Sqmm complete all as specified and directed 139 Supply fixing testing and commissioning submersible cable flat 2.5 sqmm 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer foe every column pipe of 3 mtr lenght all as specified and directed. 140 Supply, installation, commissioning and testing in replacement of APFC panel of capacity 40 KVAR (20 KVAR X1,10 KVAR X 1,5 KVAR X 2)powder coated factory made outdoor type of suitable size made ofCRCA sheetmade from min 3.15 mm thick sheet CPRI manufactureswith countersunk holes at bottom for base mounting brackets and sheet steel gland plates for cable entry, formed gasket arround doors, with provision of Lock inserts, earthing straps, door stay complete panel prewired with suitable size of copper cable not less than 2.5 sqmm and grouted in ground by using angle iron frame of size 50mm x 50mm x 6mm, PCC (1:2:4) type C-1 with 20mm graded stone aggregate.Panel comprising with following:- 141 (a) Incoming MCCB 4 pole 100 Amp 16 KA alongwith Spreader terminals with adjustable thermal setting– 01 Nos(b) Multifunctional 4 in 1 meter like Amp,Voltage, frequency, powerfactor as per capacity of panel = 01 No.(c) Phase Indicator Lamp RYB with sheds LED Type - 01 Set of three(d) Capacitor MPPH type with suitable size 3 phase power contactors and with individual 3 pole 415 volt MCBs of suitable capacity including indication lamp of each capacitor.(e) Microprocessor based 3 phase current transformer sencing relay 4 stage = 01 No( for operating of capacitor bank)(f) Auto/Manually switch of capacitor bank(g) PCC 1:2:4 for installation of panel 142 Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 25W lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup. 143 Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 600x600x400 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legsand bus bar of Copper conductor suitable shape and size , 6 No of 200 amps rating including taking out end connectinons of the existing cablesand fixing the cable with the panelusing new lugs and glands of suitable size. 144 Supplying, installing, testing, commissioningofmonoblock Horizontal Filter Feedpumps 5 HP Complete in CI body& CI impeller with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply .Pumps = 02 Nos.(1w + 1s)Flow rate (each)= 20 m³/hrHead = 25 - 30 m 145 Supply and fixing in replacement of non clog type of submersible pump set with motor of capacity 12.5 HP, 415V, 50 Hz, discharge 1000 LPM and head 40 Mtrall as specified and directed by Engr-in-charge.Note:- Old unsv pumpset with motor will be deposited in MES store. 146 Supply & laying/fixing Floor & Trench,3 layered (outer green coloured UV stabilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded PP-R (polypropylene Random Co-Polymer) pipes, ISI marked including plain PP-R fittings and brass threaded PP-R fittings such as flanges, elbow, bend, sockets, tee etc. as required at site and testing of joints complete all as specified and as directed of size:- 147 (a) PN-16, 50 mm OD (SDR– 7.4) 148 (b) PN-16, 32 mm OD (SDR– 7.4) 149 (c) PN-16, 50 mm OD (SDR– 7.4) 150 M&L for repair/rectification of leakage/blockageto water supply distribution lines 50/80mm bore of GI/HDPE/PPR/PVC tubing by necessary excavatio , returning /filling as required , including replacement of,elbow, socket, nipple, D joint, welding as per site requirementas required complete all asdirected. 151 S&F in replacement PPR gate valve (brass insert) of size 50 mm bore including connection and testing complete all as directed. 152 M&L for attendingelect and mechanical breakdownof sewage submersible pump sets, monoblock pump set, Air compressor and electric break downas and when any breakdown occurred .The contractor shall provide the technician within2 hrs after breakdown of Submersible and monloblock pump sets and motor, starter, incase of failure for non attending complaint a penalty of 2000 per compaint will be imposed complete all as directed. Note : Rates quoted shall be inclusive of draining out the collection tank and lifting and lowering pumpset for checking and inspecting the submersible pump set andmaking functional 153 M&L for providing and lowering, connecting submersible pump set 5 to12.5 HP for drainingout the collection tank during the unserviceability of existing pump set including connectingdrain pipe cable etc as per site requirement complete all as directed. 154 Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope / gradient forlaying cables/ pipes etc.all as specified and directed including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed.Note : Excavation shall be made carefully in order to avoid damage of existing cables/pipes and protection covers. 155 Returning, filling in including spreading, leveling, watering and well ramming in layers of25 cm thickafter the cables etc. are laid, jointed & tested complete all as specified and directed 156 Removal of surplus excavated soilexc. 50 mtr butn. exc. 250 mtr distance and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as directed. 157 Supply and fixing in replacement of PVC suction currugated hose pipe with flanged ends of green colourof bearing capacity 2500 Pa, temperature range 0deg-100deg and velocity 30-40 m/s of foloowing size all as specified and directed by Engr-in-Charge. 158 (a) 50 mm bore 159 (b) 80 mm bore
