Tender For Provision Of Mechanical Laundry At College Of Nursing And Provision Of Flood Lights At Certain Location At Chafb; 1 COMMON ITEMS APPLICABLE FOR JOB A AND JOB B 2 Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth, getting out for electric cable complete in any type of soil complete all as specified and directed. 3 Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and directed. 4 Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n exc 25cm thick complete all as specified and directed. 5 Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed. 6 M&L for sand filling (pulverized stone dust) for sand cushioning incl spreading & levelling for protection of cable complete all as specified and directed. 7 M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip of size 32 x 6 mm by means of bolts, nuts and washers of galvanised iron or steel all as shown in elecrticalplate No 3 of SSR pt I, connected to DB/earthing test point includingPCC chamber, RCC cover 50mm thick with 8 mm dia bars, protection pipe, funnel etc including excavation, earth work, disposal of surplus soiland earth strip protection pipe of GI 40 mmbore light grade upto 7.5 metre including testing on completion all as specified and as directed.NOTE:- Excavation work required for earthing , salt and char coal required for earthing shall be included in the rate quoted and nothing extra shall be paid for this. 8 M&L for reinforced cement concrete Mix Design M-25 using 20mm graded aggregate as in column footings & bases for columns complete all as specified and directed. 9 S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 10 ITEMS APPLICABLE FOR JOB A 11 Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. 12 Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed. 13 M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conformingto IS : 8944 or IS-632 respectively). 14 M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conformingto IS : 8944 or IS-632 respectively). 15 M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conformingto IS : 8944 or IS-632 respectively). 16 M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed. (Make : Chlorophyriphos or lindane emulsifiable concentrate conformingto IS : 8944 or IS-632 respectively). 17 M&L for Plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. 18 M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in slabs supported on columns and beams complete all as specified and directed. 19 Ditto All as per Item no 18.00 here-in--before but for chajjas 20 M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified and directed. 21 M&L for reinforced cement concrete Mix Design (M-25) using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. 22 M&L for formwork to sides of concrete foundations, footings, bases of colmns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter finished rough and flat complete all as specified and directed. 23 M&L for formwork to sides of pillars, posts, sturts, piers, columns and stanchions square, rectangular or polygonal finished rough complete all as specified and directed. 24 M&L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilever, shelves including supports, overhangs, etc. also splays between floors and beams, etc finished rough and flat complete all as specified and directed. 25 M&L for formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) finished rough and flat complete all as specified and directed. 26 S&F forTMT bars 10mm diaand over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.90mm dia complete all as specified and directed. 27 Ditto All as per Item no 26.00 here-in-before but 6mm to 8mm dia (as in stirrups). 28 M&L for Damp Proof Course (DPC) with 40mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregates) with water proofing compound as recommended by manufacturer and apply evenly a coat of blown bitumen grade VG-10 @ 1.5 Kg per Sqm and blended with clean sand @ 0.05 Cum/Sqm on properly cleaned surface after at least seven days of curing complete all as specified and directed.Note : DPC shall be provided over full width of all internal and external walls except at openings. 29 M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 1:3:6 set in cement mortar 1:6 complete all as specified and directed. 30 M&L Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even complete all as specified and directed. Note : Water Proofing compound shall be measured & paid seperately. 31 Supply only Liquid water proofing compound as approved by GE complete all as specified and directed. 32 M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed. 33 M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces complete all as specified and directed. 34 M&L for preparation of new or prevously untreated plastered surfaces of walls and applying three coats of white wash on newly plastered wall surfaces, complete all as specified and directed. 35 Ditto All as per Item no 34.00 here-in--before but on ceilings. 36 M&L for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint , white or tinted complete all as specified and directed. 37 M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. 38 M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberanecomprising of the following for Non approachable roofs :- 39 M&L Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster complete all as specified and directed. 40 M&L One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces complete all as specified and directed. 41 M&L One layer of APP based polymeric water proofing membrane of 3mm thick and weight not less than 3.50 kg/Sqm minimum consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm andthe over lap shall be sealed by flame as per manufacturers instruction complete all as specified and directed.Make: (M/s STP Ltd / M/s Texa india Ltd / M/s IWL Ltd/M/s Berger) 42 M&L Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm complete all as specified and directed. 43 S&F Steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete with glazing bars and guard bars, dovetailed or welded complete all as specified and directed.Note :-Glazing & painting shall bemeasured & paid separately. 44 All as per item No 39.00 here-in-before but without glazing bars or with gauzing bars complete all as specified and directed. 45 S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified and directed. 46 S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperturee 1.18 mm and fixed with beads or stainless steel wwie staples complete all as specified and as directed. 47 S&F Steel rolling shutters (thickness of lath 1.25mm), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed. 48 M&L for preparation of new steel sufaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 49 M&L for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished surface complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. 50 M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 51 M&L for broken stone or boulders hardcore of gauge not exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. 52 M&L for 100mm thick cement concrete type E-2 1:5:10 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed. 53 M&L for 25mm thick cement concrete type B-0 under 12.5mm grade crushed stone aggregate as in sub base complete all as specified and directed. 54 M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 20mm thick in cement mortar 1:6, complete all as specified and directed. 55 M&L for Machine cut kota stone (Prepolished) slab as in skirting/risers etc 18-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and screed bed or bedding layer of 15mm thick backing coat in CM 1:4, complete all as specified and as directed. 56 S&F PTMT Ballvalves, 25mm diabore high pressure, with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. 57 S&F 5000 Ltrs Capacity trible layered Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I ,complete all as specified and as directed. 58 S&F 25mm bore tube medium grade galvanized with all fittings and connections, complete to walls and ceilings or laid in floors complete all as specifiedand as directed. 59 S&F 50 mmbore tube medium grade galvanized with all fittingsand connections, complete to walls and ceilings or laid in floors complete all as specifiedand as directed. 60 M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, metal flush box of 1.60 mm thick suitable for modular switches/ sockets/fan regulators incl modular white cover plate and modular metal flush box with frame of required modules with, blanking plates,brass screws, cup washers etc including all cutting / chases etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- 61 One light point controlled by one, one way switch 06 Amps 62 One ceiling / air circulator / exhaust fan point controlled by one, one way switch 06 Amps 63 One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch 64 One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch 65 All as per Item no 56.00 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. 66 S&F Modular switch, 06 Amps, single pole, one way, 230 volts, one module complete all as specified and directed 67 S&F Modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed 68 S&F Modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and directed 69 S&F Modular socket outlet 2 in 1, 03 pin,16 Amps, 02 module with shutter complete all as specified and directed 70 S&F ceiling rose, 65 x 50 mm surface type with 3 terminals incl connection complete complete all as specified and directed 71 S&F Exhaust fan 450 mm sweep heavy duty, steel body, AC, single phase 230 volts, 50 Hz, with blades, frame and louvers shutter with necessary hole drilling in wall and making good the disturbed surfaces complete all as specified and directed 72 S&F Air circulator fan of 600 mm sweep, wall mounted, industrial type, double ball bearing, AC, single phase, 230 volts, 50 Hz, 90 degree wide spread oscillation complete all as specified and directed. (Make : Bajaj, Model : Supreme Plus, SKU Code : 250528 or techno commercially equivalent in Havells / Usha / Crompton) 73 S&F Surface and wall mountedLED batten with polycarbonate housing and initigarated electronic drive20 Watt fixture 4 feet, provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connection with 2 core flexiblecopper conductor cable of suitable size from Ceiling rose complete all as specified and directed. 74 S&F Energy saving security light fitting of 35/36 watts LEDVersatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core and including 40 mm bore light grade GI tube mounting bracket of suitable length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. 75 M&L for sub main wiring with 4.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 20 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed.Note: Two run of 4.00 sqmm single core cable and one run 4.00 sqmm earth wire including pvc conduit together will be measured as one unit. 76 All as as Item No 67.00 here-in-before but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuous earth wire in 25 mm PVC conduit complete all as specified and directed.Note: Two run of 6.00 sqmm single core cable and one run of 6.00 sqmm earth wire including pvc conduit together will be measured as one unit. 77 All as as Item No 67.00 here-in-beforebut for 04 x 10 Sqmm for phase & neutral and 01 x 10 Sqmm for continuous earth wire in 32 mm PVC conduit complete all as specified and directed.Note: Two run of 10.00 sqmm single core cable and one run 10.00 sqmm earth wire including pvc conduit together will be measured as one unit. 78 S&F Sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 08 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 100 amps as incomer and MCB SPs as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall complete complete all as specified and directed.(Note : MCCB & MCB SPs will be measured and paid seperately) 79 S&F Sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall complete all as specified and directed. 80 S&F sheet metal enclosure with 3 pin metal clad industrial plug and socket, 3 phase 415 V fitted with TPN MCB 63 Amps, concealed in walls complete all as specified and directed 81 All as per Item no 72.00 here-in-before but with TPN MCB 32 amps 82 S&F Single pole & neutral enclosure with a two pin and earth plug and socket with and including MCB, SP, AC, 240 volts of 20 Amps, C curve 10 KA breaking capacity and flush to wallcomplete all as specified and directed 83 S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 25 KA suitable for load line/ VTPN DB & connection complete all as specified and directed 84 S&F MCB TPN 63 amps, 415 Volts, AC of breaking capacity 10 KA,C curve and connections by using suitable copper lugs complete all as specified and directed 85 S&F MCB SPN 63 amps, 240 Volts, AC of breaking capacity 10 KA,C curve and connections by using suitable copper lugs complete all as specified and directed 86 S&F MCB SP, AC, 240 volts of 06 to 32 Amps capacity B curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and directed. 87 All as per Item no 78.00 here-in-before but 40 amps rating. 88 M&L for Earth Continuity Conductor or main earthing lead including fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4 mm dia galvanised iron or steel wire complete all as specified and directed. 89 All as per Item no 80.00 here-in-before but 6 mm dia. 90 S&F GI pipe 50 mm dia medium grade with all fittings and fixed complete to wall and ceiling or Load in trenches including drill hole on wall complete all as specified and directed. 91 S&F GI pipe 25 mm dia medium grade with all fittings and fixed complete to wall and ceiling or Load in trenches including drill hole on wall complete all as specified and directed. 92 S&F Gate valve Gun metal iron wheel head screwed both ends complete for size 50 mm complete all as specified and directed. 93 Cutting existing steel tubing for alterations or additions (Each cut measured) GI water mains (in position) for branch connection of 25/40/50 mm internal dia complete all as specified and directed. 94 Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of the following sizes :-(Note :- Excavation & earth work, sand cushioning, bricks protection & GIpipe whereeverrequired shall be measured & paid seperately) 95 240 Sqmm 3.5 core 96 50 Sqmm 3.5 core 97 S&F GI tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for the following sizes :- 98 80 mm bore 99 50 mm bore 100 S&F Manualonload change over switch 250 amps, 4 Pole, 415 V, AC, in sheet metal enclosure extended handleand connecting up the incoming cables and outgoing cables to the change over switch with necessary cable lugs, cable glands of suitable size and testing on completion complete all as specified and directed. 101 Supply, installing, testing and commisioningof CPRI approved LT cubical panel board 440 volts, 50 Hz, 3 phase, 4 wire, Out door type >IP 65, weather, vermin, dust proof, front operated with adequate air ventilation at sides and back fabricated out of 3.15 mm thick CRCA sheet with double door shutter and locking arrangements, cablestrays, cable lugs,cable glandetc.including provision for taking out incoming and outgoing cables duly marked with relevetted letter plates of appropriate size for each feeder cables, danger board etc, floor mounted with PCC 1:2:4, type B1 platform of 50 cm height suitable nut bolts, washer etc. for grouting , and painting with power coated epoxy finish of approved colour over a coat of red oxide primersuitable to accomodate and including the following mentioned fittings complete for and incl comprising the following :- 102 (i) Bus bar chamber consisting of four Nos Aluminiumbus bars duly sleeved of capacity of 400 Amps for phases andneutral. duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulation in separate compartment.(ii)Digital Volt/Ammeter (0-500v/0-250A) with suitable CTs & Selector Switch(iii) LED type indicating lamps (RYB) with holders controlled by fuses and swicthes . (iv)Panel board internal wiring with suitable rated PVC insulated copper conductors.(v) MCCB 3 phase 415V, 200 Amps 4 pole 35 kA, Fixedmagnetic and Fixedthermal - 1 No (incoming)(vi) MCCB 3 phase 415V, 160 Amps 4 pole 35 kA, Fixedmagnetic and Fixedthermal - 1 No (outgoing)(vii) MCCB 3 phase 415V, 100 Amps 4 pole 25 kA, Fixedmagnetic and Fixedthermal - 1 No (outgoing)(viii) MCCB 3 phase 415V, 63 Amps 4 pole 25 kA, Fixedmagnetic and Fixedthermal - 1 No (outgoing) 103 M&L for Earth Continuity Conductor or main earthing lead including fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 32X6 mm dia galvanised iron or steel wire complete all as specified and directed. 104 Supply, installation, testing and commissioning of Industrial Washer extractor, 3 ph, 415 V, AC, 50 Hz of capacity 30 kg with 7.5 HP motor, front loading type, overall dimension - 1280W x 1400D x 1870H, basket size of 840 mm dia x 550 mm depth with basket volume - 305 litres, extraction speed - 865 RPM, clear door opening of 525mm dia, G-factor-350, made of stainless steel, fully programmable PLC, individual push buttons for start,pause, power, electric heater with heating capacity of 18 KW, timer that shows required time for total washing, blinking light indicating completion of washing cycle, water level indicator, front loading and unloading, stainless steel chemical compartments, safety main controller switch, safety door limit switch,VFD controller, electric interlock and door limit switch, emergency stop button including transportation and unloading of machinery at the site andmounting the machine on RCC foundation as per manufacturer instruction complete all as specified and directed. (Make : IFB, Model :IWE 30 or techno commercially equivalent in LG/Samsung)Note : RCC for foundation shall be measured and paid seperately under respective schedule of item. 105 Supply, installation, testing, and commissioning of industrial tumble dryer, 3 ph, 415 V AC, 50 Hz of capacity 15 kg with drive motor of capacity 0.5 HPand exhaust motor of capacity 0.75 HP, front loading, overall dimension of 830W x 1270D x 1490H (in mm), basket size of710mm dia x 705mm depth, basket volume of 279 Ltr, electric heated with electric radiators with heating capacity of 12 kw, clear door opening of 500mm dia, programmable stainless steel inner basket for forward and reverse rotation , SS lint collection mesh, auto cool down, fully programmable controller, digital display, emergency stop buttons,safety limit switch and door limit switch including transportation and unloading of machinery at the site and mounting the machine on RCC foundation as per manufacturer instruction complete all as specified and directed(Make : IFB, Model : ITD 15 or techno commercially equivalent in LG/Samsung)Note : RCC for foundation shall be measured and paid seperately under respective schedule of item. 106 Supply, installation, testing, and commissioning of Flat bed press, 3 ph, 415 V, AC, 50 Hz of bed size 1500mm x750mm with blower motor of capacity 0.75 HP with heavy duty suction for powerful suction in the bed, electric heated with heating capacity of 18 kw, overall dimension of 1570W x 1350D x 1250H (in mm), air inlet size of 8mm dia at a pressure of 4 to 6 bar, main body made of MS plates, base made of MS flat duly welded and full body is powder coated for corrosion resistance, top head made of SS304 grade ironing surface, pneumatically operated, push buttons for adjusting the head, digital temperature control including air compressor of capacity 2 HP, reciprocating type single stage, air receiver of minimum capacity 100 Ltrs, maximum pressure of 10 kg/cm^2, free air delivery of 3.89 cfm, deep finned cast iron cylinderincluding transportation and unloading of machinery at the site and mounting the machine on RCC foundation as per manufacturer instruction complete all as specified and directed. (Make : IFB, Model : IFBP or techno commercially equivalent in LG/Samsung) Note : RCC for foundation shall be measured and paid seperately under respective schedule of item. 107 S&F Hydraulic hose of 1 (1 inch) dia with hex nipple complete all as specified and directed. 108 S&F GI ducting for tumble dryer of suitable sizeas per manufacturers instructions including making hole in the wall and making good the disturbed surface complete all as specified and directed. 109 ITEMS APPLICABLE FOR JOB B 110 S&F Energy saving LED flood light fitting of thr following capacities , environmental friendly, long life, die cast aluminium IP 66 comprising with electronic driver and all accessories, pre-wired, fitting to be fitted on wall / pole with necessary fixing arrangement with nut, bolts, washers etc as required/directed at site incl connection with PVC insulated copper conductor cable 1.5 Sqmm, 3 core complete all as specified & directed:- 111 80 watts 112 100 watt 113 120 watt 114 150 watt 115 200 watt 116 Supply and laying or fixing or passing through pipe, 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified & directed for following sizes :- 117 16 sqmm 4 core 118 10 sq mm 2 core 119 6 sq mm 2 core 120 S&F 1100 volt grade, heavy duty cable PVC insulated aluminium conductor of following sizes , multistranded, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended complete all as specified & directed 121 6 Sqmm, twin core, flat or circular 122 10 Sqmm, twin core, flat or circular 123 M&L for GI tubing light grade 40 mm bore with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed 124 M&L for PVC cable loop box size not less than 200mm x 140mm x 95mm, outdoor type, duly fitted on wall/pole with suitable clamp, nuts, bolts & washerss incl to accommodate & incl one no of MCB SP 6 amp, B series, suitable aluminium with bus bar of 3 phase porcelain insulated connectors incl suitable size of lugs & gland for Incoming and outgoing cables complete all as specified & directed 125 M&L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC conduit of 20 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs complete all as specified & directed. Note: Two run of 2.5 sqmm single core cable and one run 2.5 sqmm earth wire including pvc conduit together will be measured as one unit. 126 All as per Item no 101.00 here-in-before but for 02 x 1.5 Sqmm for phase & neutral and 01 x 1.5 Sqmm for continuous earth wire in 20 mm PVC conduit complete all as specified & directed. Note: Two runs of 2.5 sqmm single core cable and one run 2.5 sqmm earth wire including pvc conduit together shall be measured as one unit.
