Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Cabine AreaOffice TableSupplying and placing in position Main Table with side unit. Over all size of the table with side unit shall be 1650Wx1650Dx750H mm.Primary Work Surface shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with0.4mm PVC membrane pressed on to top. Softclosing accessflap with in-build power box shall be provided on work surface for wire management. Secondary Work Surface shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel shall be made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated pedestal shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction shall be BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension shall be 325 MM. Drawers shall have a soft closing & anti slam mechanism.Handles shall be provided for ease of opening.Pedestal shall be provided with lock for security. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 2 | Revolving ChairProviding and placing in position High Back Chair. SEAT/BACK ASSEMBLY: The seat shall be made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat shall have extra thick foam on front edge to give comfort to popliteal area. The Back shall be injection moulded in glass filled Polypropylene which shall be upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size shall be *SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam shal be moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range). Armrest top shall be mounted on Armrest structure made of glass filled Nylon· Armrest Top shall be PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism shall be designed with the following features: 360° revolving type, 3 position locking with anti shock mechanism, Tilt tension adjustment. HEADREST: The Headrest sub-assembly shall be made up of injection moulded glass filledPolypropylene which shall be upholstered with moulded HR polyurethane foam and fabric. It shall have an adjustment of 4.0 ± 0.1cm & it shall be assembled over chair. The complete headrest assembly shall be retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 3 | Visitor ChairProviding and Placing in position Visitors Chair. The cushioned seat assembly shall be made of injection molded plastic inner & outer. Plastic inner shall be upholstered with foam laminate fabric & moulded high resiliance polyurethane foam of density 45+/-2 per cubic metre and hardness load of 16+/-2 Kgf. Seat size shall be 46 cm W x 48 cm D. Thecushioned back shall be made of PU foam with insitu molded MS ERW round tube of size 1.9+/-0.03 x 0.16+/-0.0128 cm. it shall be upholstered with foam laminate fabric. Back size shall be 46.6 cm W x 59.6 cm H. The powder coated tubular frame shall be cantilever type and shall be made of 2.54+/-0.03 x 0.2+/-0.016 cm thick MS ERW tube. The back shall be connected to the frame through powder coated high pressure die cast connector piece. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 4 | AlmirahSupplying an d placing in position of Almirah. Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It shall have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a Mazak handle and Three way locking mechanism with Shooting Bolts. It shall have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It shall also have a M10 Screw type Leveller with Hex plastic base. The finishing shall be include Epoxy powder coated to the thickness of 50 microns (+/- 10). Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge.Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 5 | Copy Checking AreaTable for copy checkingSupplying and placing in position of Table. Overall table size shall be1800 Width mmx 900 Depth mmx 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVCEdge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top. The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 6 | Revolving ChairProviding and Placing in position Chair for workstation. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm.x 0.2±0.016cm thk.MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethanefoam shall be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. The mechanism shall be designed with 360° revolving type, 17±2° maximum tilt m pivot at centre, Upright position locking., Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in Black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm.pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min89.5 to max 100.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 7 | Secrecy & Strong RoomOptimizerProviding and Placing in position Optimizers. Main body Construction shall be rigid knock down made out of 0.8 thick CRCA steel. Each configuration have following type of blocks – Static Drive (SD), Last Drive (LD),Twin Drive(TD). Finish: Finish shall be Epoxy polyester powder coated thickness of 40 microns. Construction: Shelf construction shall be made from CRCA steel 0.8 mm. Uniformly distributed load capacity of 100 Kg. Undercarriage: Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick. Movement: The Movements shall be Drive type configuration. In case of drive type movement of units shall be achieved by rotating a PU hand wheel. The hand wheel comprises of a welded metal frame which shall be covered by PU using insert-molding process. The metal frame shall be made of HR sheet 3mm thick. The handwheel shall be connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. each movable understructure shall have 3 driving rollers and 3 driven rollers. LD understructure shall have 2 nos. of anti-tilt bearing assembly. The ‘sprocket-chain’ arrangement shall be covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and shall be fixed onto the side of the body. The PU handwheel shall be rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm. Fixed unit (SD) shall not have the Drive Unit Cover and handlewheel. Locking: Each Drive type unit shall have a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. This prevents other users from accidently moving units while someone is inside. Knob shall be rotated to unlock position when units are to be moved again. A centralized locking arrangement shall also provided on drive unit cover. A cam lock and lever arrangement shall be fitted on the drive unit cover of the last movable body, i.e. (LD). After all bodies are brought together, the bodies shall be locked using their respective knobs. The cam lock is then turned to lock position. This locked cam lock ensures that the knob of the last body remains in the locked position unless the cam lock shall be unlocked. This in turn ensures that the entire layout remains locked. The nuts & bolts shall be galvanized / blackodized / Zn Plated. Label holder: It shall be an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of body. The Paper shall be 300GSM matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper shall be 394mm for LD/SD and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron polythene shall be inserted. Rail Pair: It shall consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both connected by screws. Prior to the grouting of the guide channels with the help of raul plug & screw, ensure the ground is level. The rail channels shall be of 3 lengths i.e., 800mm, 1600mm and 2400mm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 8 | 3 Bay Static Drive type Unit of size -: 3600 W mm x 400 D mm x 1980 H mm |
| 9 | 3 Bay Twin Drive type Unit of size -: 3600 W mm x 800 D mm x 1980 H mm |
| 10 | 3 Bay Last Drive type Unit of size -: 3600 W mm x 400 D mm x 1980 H mm |
| 11 | Channel Pair for 3 Bay Optimizer 2400 |
| 12 | Channel Pair for 3 Bay Optimizer 2400 |
| 13 | Channel Pair for 3 Bay Optimizer 2400 |
| 14 | Optimizer 2Providing and Placing in position Optimizers. Main body Construction shall be rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each unit has 5 loading levels formed by 4 nos. adjustable shelves for 1980 Height body and 6 loading levels with 5 nos. adjustable shelves for 2361 Height body.Body units are mounted on an understructure which is fixed or moving.The body comprises the following components: 1. Front Cover: It is the foremost panel of the body on which the handles (Push pull)/ Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. The front cover has a pattern of holes on the front surface for ventilation purpose.2. Back Cover: It shall be the backmost panel of the body and shall be the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. The back cover has a pattern of holes on the surface for ventilation purpose. 3. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel for 1980H unit as well as 2361H unit. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body (TM/TD). When the entire optimizer layout is locked it also prevents access to inside files from the outside in case of single body (SS/SD/SL/LD). 4. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. 5. Door Frame: The door frame assembly is made of 2 vertical door stiffeners, a top horizontal stiffener and a bottom horizontal stiffener. It provides rigidity to the entire Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body) if the customer chooses to not have back panels. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ between two opposite shelves. The tie rods are made of 4mm diameter rods of MS while the fixing brackets are made of 2mm thk. CRCA Steel conforming to IS: 513 Gr.D. The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. It involves an 8-step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, cold water rinse, phosphating, cold water rinse, and passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf: (a) Construction: It is made of 0.7 thk CRCA steel conforming to IS: 513 Gr.D or DD. Its max load bearing capacity is 100 Kg uniformly distributed per shelf. For P1 and P2 type of Configuration recommended shelf load is less than 100kg (Refer UDL chart below). This is done to ensure that the unit is light enough for one person to pull/push with a handle even at recommended full load capacity. Shelf can be placed at clear height of 386mm from bottom in everybody. The last loading level for shelf is 1721mm from ground level for 1980H body and 2107mm from ground for 2361H body. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4 adjustable shelves per body for 1980H and 5 adjustable shelves per body for 2361H, giving 5 and 6 loading levels for 1980H and 2361H body respectively.(b) Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm. The Understructure shall be a welded frame suitably fabricated to bear the loads based on configuration. The frame consists of the following parts: Main channel, body-fixing channel, body-fixing angle and bearing-fixing angle. All the components are made of CRCA sheet 2 mm thk conforming to IS:513. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 15 | 1 Bay Single Static Unit of size -: 1200 W mm x 400 D mm x 1980 H mm |
| 16 | 1 Bay Twin Mobile Unit of size -: 1200 W mm x 800 D mm x 1980 H mm |
| 17 | 1 Bay LastStaticUnit of size -: 12 00 W mm x 400 D mm x 1980 H mm |
| 18 | Channel Pair for 1 bay Optimizer 2400 |
| 19 | Channel Pairfor 1 bay Optimizer 1600 |
| 20 | Channel Pairfor 1 bay Optimizer 800 |
| 21 | COE OFFICE:-Table for COESupplying and placing in position Main Table with side unit & pedestal. Overall dimension of the table with side unit shall be 2350Wx2350Dx750H mm.Primary Work Surface shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Softclosing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension shall be 325 MM. Drawers shall have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal shall be provided with lock for security. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 22 | Back UnitSupplying and placing in position of Back unit. Overall Dimensionshall be 2350W x500Dx1800H mm.Top Panel shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves.Shutters shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters shall havea soft closing & anti slam mechanism. Handles shall be provided for ease of opening. Storage shall be provided with lock for security.Display unit shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves. Doors shall be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Top panel of display unit shall be made of 25mm thick MDF one side pre-laminate board confirmin to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 23 | High Back ChairProviding and Placing in position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 24 | Visitor ChairProviding and Placing in position Visitors Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The tubular frame shall be cantilever type and made of Ø2.54±0.03 cm x 0.2±0.016 cm thick SS 202 tube. The back shall be connected to the frame through chrome plated high pressure die cast connector piece. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 25 | Modular AlmirahProviding, placing in position storage unit. Over all size of storage unit shall be 1800W x450D x 1950H with Combination of Main and Addon Unit. Construction & Material - It shall be Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock-3 Way locking shall be provided.Click action mechanism.Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Door - Door shall be made from CRCA .Shelving - It shall be a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513)Each shelf shall have max Load Capacity of - 55kg UDL for 900W unit . 4 Nos. of fixed shelves for 1950(H)Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron).Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 26 | 3 Seater SofaSupplying and placing in position of three seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose. Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Overall size shall be Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 27 | 2 Seater SofaSupplying an d placing in position of two seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose.Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Over all dimensionsshall be Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 28 | Centre TableProviding and placing in position Centre Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 29 | Corner TableProviding and placing in position Corner Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.overall dimensions oftable shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 30 | Conference Room:-Conference TableProviding and Placing in position Conference Table. Overall size of the Table shall be 5570 L mm x 2300 W mm x 740 H mm. Made of 36mm thick MDFoneside prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together .Modesty Panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip shall be provided below work surface to enhance aesthetics. It shall be made of 0.8mm CRCA as per IS 513, & shall be epoxy polyester powder coated (DFT 40-60 microns). Wire Management shall be an array of panels made of 0.8mm CRCA MS IS:513, & shall be epoxy polyester powder coated (DFT 40-60 microns) shall be used for flow of wires and cables. Provision to mount 6 module switch plate shall be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component shall be fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 31 | High Back ChairProviding and Placing in position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 32 | Mid Back ChairProviding and Placing in position Mid Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 60.1 cm D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 33 | Table with Side UnitProviding and Placing in posirion Table for Deputy Registrar Cabin. Overall size of the table shall be 1650 W x 750 D x 750 H & ERU 1200 W x 500 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. There shall be 2 Nos. of Drawer Units i.e., 1 Nos. under Main Table & 1 Nos. under ERU, where Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 34 | High Back ChairProviding and Placing in position High Back Chair. Overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 35 | Visitor ChairProviding and Placing in position Visitors Chair. Overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated high pressure die casted connector pipe, Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 36 | 3 Seater SofaSupplying and placing in position of three seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose. Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Overall size shall be Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 37 | 2 Seater SofaSupplying an d placing in position of two seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose.Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Over all dimensionsshall be Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 38 | Centre TableProviding and placing in position Centre Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 39 | Corner TableProviding and placing in position Corner Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.overall dimensions oftable shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 40 | Assitant Registrar:- Table for Assitant RegistrarProviding and Placing in posirion Table for Deputy Registrar Cabin. Overall size of the table shall be 1650 W x 750 D x 750 H & ERU 1200 W x 500 D x 750 H. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. There shall be 2 Nos. of Drawer Units i.e., 1 Nos. under Main Table & 1 Nos. under ERU, where Drawer fronts shall be made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 41 | High Back ChairProviding and Placing in position High Back Chair. Overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 42 | Visitor ChairProviding and Placing in position Visitors Chair. Overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to frame through chrome plated high pressure die casted connector pipe. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 43 | AlmirahSupplying an d placing in position of Almirah. Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It shall have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. It shall have a Mazak handle and Three way locking mechanism with Shooting Bolts. It shall have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It shall also have a M10 Screw type Leveller with Hex plastic base. The finishing shall be include Epoxy powder coated to the thickness of 50 microns (+/- 10). Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 44 | Waiting Area3 Seater SofaSupplying and placing in position of three seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose. Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Overall size shall be Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 45 | 2 Seater SofaSupplying an d placing in position of two seater sofa. The seat shall be made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. The back shall be made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure shall be made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly shall be mounted over understructure for cushioning purpose.Leg assembly shall be a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Over all dimensionsshall be Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 46 | Centre TableProviding and placing in position Centre Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions oftable shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
| 47 | Corner TableProviding and placing in position Corner Table. Glass shall be 12+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shallbe a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762.overall dimensions oftable shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm. Make- Godrej/ Haworth/ Steelcase Complete in all respect with the prior approval of Engineer in charge. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
