}

Tender For Providing Electrification And Street Light In New Release Pocket Sector-52 Hsvp Gurugram. S/E Of Pcc Poles, Acsr Conductor, 200 Kva T/F In Sector-52 Hsvp Gurugram And All Other Works Contingent Thereto (Including 6 Years Defect Liability Perio, Gurugram-Haryana

Haryana Urban Development Authority has published Tender For Providing Electrification And Street Light In New Release Pocket Sector-52 Hsvp Gurugram. S/E Of Pcc Poles, Acsr Conductor, 200 Kva T/F In Sector-52 Hsvp Gurugram And All Other Works Contingent Thereto (Including 6 Years Defect Liability Perio. Submission Date for this Tender is 04-09-2025. Street Lighting Tenders in Gurugram Haryana. Bidders can get complete Tender details and download the document.




Tender Notice

50879208
Tender For Providing Electrification And Street Light In New Release Pocket Sector-52 Hsvp Gurugram. S/E Of Pcc Poles, Acsr Conductor, 200 Kva T/F In Sector-52 Hsvp Gurugram And All Other Works Contingent Thereto (Including 6 Years Defect Liability Perio
Tender
Indian
Haryana
Gurugram
04-09-2025

Tender Details

tender for Providing electrification and street light in New release pocket sector-52 HSVP Gurugram. S/E of PCC poles, ACSR conductor, 200 KVA T/F in sector-52 HSVP Gurugram and all other works contingent thereto (Including 6 years defect liability period for T/F and 1 year defect liability period for other items, free of cost). --- 1 [13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 2 [13.32]Providing and fixing bolts including nuts and washers complete. 3 [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. 4 [24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. 5 [24.3.4.2]HT CABLE 4.2. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 150 to 185 sqmm 6 [6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) 7 [24.13.1]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK.4 Sq mm 2 core (UnArm.) 8 [24.13.62]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK .95 Sq mm 3.5 core (Arm.) 9 NS) Supply, installation, Testing and commissioning of LED type IP-66, 25 watt Street Light fittingcomplete in all respect i.e. entire satisfaction of Engineer-in-charge of work. (with 3 year free replacement warranty as per specifications in annexure attached) make Phillips, Bajaj, LT. 10 NS) S/E of GI pipe bend 1 mtr. long 25 mm dia ISI make Parkash/Surya/Jindal making an Angle of 105 deg. With suitable size nipple on 9 mtr. long PCC poles complete in all respect. 11 NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 9mtr long PCC pole 105mmx115mm at top and 105mm x315mm at bottom with working load of 200 kg buried 1.5in ground as per DHBVNL specification. 12 NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 11 mtr long 152mm x203mm at top and 152mm x368mm at bottom with working load of 360kg buried 1.8in ground as per DHBVNL specification. 13 NS) Supply and erection of ACSR conductor of 80 Sqmm sizes ISI marked complete in all respect as ISS:398 P-I and II, 1976 with latest amendments upto the entire satisfaction of engineer in charge of the work. 14 NS) Supply and erection of LT shackle insulator brown glazed size 115mm x 100mm type-I suitable for 415/240 volts confirming to IS 1545/1977 with latest amendment thereoff. 15 NS) Supply and erection of M.S.D strap made out of 50x6mm M.S. Flat having suitable holes and other accessories to fit it properly as per HSVP drawing/specification upto the entire satisfaction of Engineer-in-Charge. 16 NS) Supply and erection of 300 sqmm x 1 core alum. Conductor PVC insulated cable as per ISS : 1554/P-I complete in all respect upto the entire satisfaction of engineer-in charge of work.(.Make Havells,Polycab.Grandly ) 17 NS) Supply and erection of wooden cleats of size 4” wide and 1’6” long complete with 4 Nos holes suitable to pass through 300/400 Sqmm single core cable complete in all respect up to the entire satisfaction of engineer in charge. 18 NS) Supply and erection of GI pipe for transformer earthing 40 mm dia (B-class) with 12 mm dia. holes in 100 mm dia bore in earth up to moisture level using proper earth electrode upto full length suitable for pole mounting substation, earthing should be designed with regards to max likely earth fault current. 19 NS) Supply, installation, testing, commissioning and handing over 3 Phase, 11KV/433-250V, 200 KVA oil immersed natural cooled type (ONAN) Alum. wound outdoor type(4 star) Energy Efficiency Distribution transformers as per IS 2026-1977up to the entire satisfaction of engineer in-charge of work. 20 NS) Supply and erection of 11 KV 400 amp. GO switch vertical mounted type and suitable for 11 KV system confirming to ISS 1818/1972 or accordance with IS:9921 complete in all respect including GI pipe, handle,M-5 steel frame and other accessories upto the entire satisfaction of engineer in-charge of the work. 21 NS) Supply and erection of LT fuse unit suitable for 200 KVA transformer including cost of MS clamps Nut and Bolts etc. complete in all respect upto entire satisfaction of engineer-in charge of work. 22 NS) Supply and erection of 11 KV brown glazed 10 KN pin insulator with GI pin / silicon type as per specification and approved make by DHBVNL complete in all respect 23 NS) S/E of 11 KV LA set as per ISS specification and as per the approved make of DHBVN complete in all respect 24 NS) Supply and Erection of 11 KV (E) XLPE cable size 185sqmm x 3 core cable use in existing pipe or trench standard compact circular alum. Conductor screened, XLPE insulated screened with extruded semi conducting compound with copper tape (3.0) LA for one second alum. Round/ strip armoured and overall PVC sheathed cable as per IS 1554-I/1988 complete in all respect upto entire satisfaction of Enigneer in charge of work. 25 NS) Supply and Erection of HDPE 160mm dia (PE-63) NP-4 for laying of underground cable of 185 Sqmm X3 core XLPE armoured cable loose complete in all respect. 26 NS) Horizontal Trenchless boring for laying of HDPE pipe 160 mm dia. (PE-63) NP-4 to avoid cutting of road and other metaled portion. 27 NS) Supply of erection of HDPE pipe 160 mm dia (PE-63) NP-4 for laying of underground cable of 185 SqmmX3 Core XLPE armoured cable 1Mtr below ground level including digging and refilling of trench complete in all respect 28 NS) Supply and erection of LT/HT guards made from GI wire 8 SWG and suitable for guard real and insulator and provided between neutral and earth wire complete in all respect as per DHBVNL specification and between two earth conductor for LT lines.. 29 NS) Supply and erection of LT PVC spacer 4 way for proper space between phase conductors flat type plastic up to the entire satisfaction of engineer in charge of the work. 30 NS) Supply and erection of LT stay set on 9.00 mtr. long PCC pole 20mm dia 6` long GI stay set with 20mm 1 No turn buckle, egg insulator large size of 110 x 110mm, elbow 20mm dia GI round welded firmly on MS angle of size 50x50x6mm stay wire 7/8 SWG, GI nuts and Bolts 50x16mm stay clamps of size 50x6mm MS flat with primer and aluminium paint two Nos 600mm long MS cross channel of size 100 x 50 x 50 x 6mm with primer and 6 SWG GI wire complete in all respect as per drawing and as per (DHVPNL) specification. 31 NS) Supply and erection of ACSR conductor conforming to IS 38 (part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor of various sizes 20sqmm PVC insulated as well as joining and binding with insulator at supports in all respect upto the entire satisfaction1n of engineer in charge. 32 NS) Supply and erection of GSL wire 8 SWG complete in all respect as per ISS 280/1978 and IS 786/1963 with latest amendment as per ISS 280 / 1978 and IS 7806/1963 and latest amendment.

Key Value

Document Fees
INR 1000 /-
EMD
INR 42100.0 /-
Tender Value
INR 21.01 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail