Tender For Design, Manufacture, Supply, Delivery, Installation, Testing And Commissioning Of 7 Nos Of 15 Persons Capacity Stretcher Cum Passenger Lift For The Work Of Reconstruction Of 336 Tenements (Ps+5) Adopting T.D.No.73/2022,74/2022,75/2022 At Thiruv
Tender Value
1.93 Crore
Estimated cost
Bid Submission
01 Sep 2025
0 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Design, Manufacture, Supply, Delivery, installation, testing and commissioning of 7 Nos of 15 persons capacity stretcher cum passenger lift for the work of Reconstruction of 336 tenements (PS+5) adopting T.D.No.73/2022,74/2022,75/2022 at Thiruvottiyur scheme in Greater Chennai Corporation under HFA Vertical -III (AHP) of PMAY-AHP.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Aug-2025 | Postponded | Other | 01-Sep-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 noof 15 passenger stretcher Cum passenger lift as per the following specifications including taxes and duties.(Gearless lift with machine room) ,1.Location: Thiruvottiyur Scheme.2.No of lift: 1 no. (Gearless).3.Type of lift: stretcher Cum passenger lift.4.Capacity of lift: 15 persons /1020 kg conforming to 14665 (part 1) 2000.5.Speed: 1.00 M / Sec6.Type of drive: V3F drive with enhanced ride comfort and near zero level functions7.No of floors: PS+5 Floor8.Total travel: 3.0 mts x 6 Landing= 18 mts.9.Leveling accuracy: high level accuracy with smooth and jerk free stopping .10. Construction ofCAR: No. 4 hardened sheethigh quality stainless steelcar and hand rail granite flooring and Perspex false ceiling.11. Position of machine: directly above the lift well.12. No of landing service: One in the front side- 1 no.13. No. of car entrance: one in the front side only.14. Car entrance door: power operated automatic V3F drive center opening sliding SSdoor.15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings.16.Lift well :As per structural design conforming to IS 14665(part1) 2000 to be constructed by the Building contractor.17.Lift pit depth: conforming to 14665 (part 1)2000.18. Car inner size,Total weight of person and Overhead height: conforming to 14665 (part 1)2000 .19. Car clear opening: 900 mm wide x 2000 mm height as per IS 14665 (part 1)2000.20.Lift machine room size:as per ISI 14665 (part 1) 2000 to be constructed by the buildingcontractor. 21. Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light.22.Control: micro computer (micro processor):based simplex collective control with / without attendant .23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan.24. Lift well: RCC construction with brick masonry to be constructed by the building contractor.25. Induction: UP / DOWN digital direction and floor position indicator for all landings in all floors and inside the car.26.Emergency alarm bell: battery operated bell to be provided with automatic charging device .27.Emergency light: battery operated light to be provided with automatic charging device.28.Fire mans switch: to be provided at the GF.29. Minor builder works: to be provided by the lift contractor.(S&F of bulk head, 5A switch, light point, wiring 2 of 2.5 sqmm at every floor and machine room lighting, 4way/8way/12 way TPN DB, fuses of required capacity) and other requirements.30. Scaffoldings: to be provided by the lift contractor.31. Sill angles and facia plates: SS to be provided by the lift contractor.32. Steel for lift machinery: to be provided by the lift contractor.33. Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor.34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories and single phase preventor specifying to IS norms.35. Provision for intercom with phone: to be provided by the lift contractor.36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy for both lift & body if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor.37. Floor position announcer: to be provided by the lift contractor.38.Special features .a) Infra red door sensor with full height screen.b) Full width half height rear panel mirror.c)TubularSShand rail in car .d) Stainless steel signal features .e) Vandal proof SS button with SS cover.f) SS door frames for landing doors .g) V3F door operator .h) Call register signal i) Stainless steel facia plates for car operating panel and landing fixtures .j) Steel ladder for lift machine room.k) On / off switch for fan and light. l) Over load warning indicator with audio announcer.m)Voltage stabilizer for control circuits.n)Braille button .o) Precautionary measures etched in SS plate .39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries .40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor.41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department .42. Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.43.All the features as per differently abled person Act should be provided. 44.2 hrs.fire retardent landing doors |
| 2 | Earthing as per ISI specification with an earth electrode of 2.10 meter class \"B\" GI pipeof dia not less than 40mm with copper earth plaste of sitze 125mm x50mmx6mm with necessary funneling arrangements with necessary masonry work and with 36mm RCC cover slab for the brick work etc complete in all respects . |
| 3 | Supplying and laying of 3 1/2 x 70 sq.mm PVC LTUG armored cable of approved brand having ISI mark on post (or) wallwith MS clamps etc complete in all respects. |
| 4 | Supply and run of 25mm x 6mm GI strip Flat Down Condutor withnecessary clamps / supports on wall / floor /ground for earth etc complete in all respects as directed by the departmental officer. |
| 5 | GST @ 18 % |
AI Tender Summary
Tender Timeline
Aug 26, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 01, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 01, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender