Tender For Development Of Ramnath Crematorium (6Th Attempt); 1 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 448.42 Sqmt. 536.09 2,40,393.48 2 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work 79.78 cu.m 1,030.81 82,238.02 3 Dismentling wood work, wrought framed and fixed in frames trusses including stacking the materials with all lead and lift. 54.89 Sqm 244.98 13,446.95 4 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 3.00 km. lead. (B) Dense or Hard soil 2,418.53 Cum 224.91 5,43,951.58 5 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 3.00 km. lead. (B) Dense or Hard soil 1,186.00 Cum 237.61 2,81,805.46 6 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 3.00 km. lead. (B) Dense or Hard soil 480.00 cu.m 249.46 1,19,740.80 7 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 3,342.40 cu.m 130.39 4,35,815.54 8 Disposing off the remaining excavated stuff of above items for lead of (E) 3.00 k.m. to 5.00 k.m. 339.00 cu.m 101.44 34,388.16 9 Disposing off the remaining excavated stuff of above items for lead of (E) 5.00 k.m. to 10.00 k.m. 102.00 cu.m 46.76 4,769.52 10 Disposing off the remaining excavated stuff of above items for lead of (E) 10.00 k.m. to 15.00 k.m. 68.00 cu.m 41.41 2,815.88 11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. 1,023.00 Cum 289.06 2,95,708.38 12 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete 5.72 cu.m 445.41 2,547.75 13 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth 745.08 Cum 3,570.75 26,60,494.41 14 Providing and laying controlled cement concrete M.200 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies 206.00 cu.m 4,690.57 9,66,257.42 15 Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. 437.63 Cmt. 4,372.48 19,13,528.42 16 Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. D) Column upto floor two level. 554.65 Cmt. 6,951.10 38,55,427.62 17 Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. (GROUND BEAM) 188.00 cu.m 5,251.81 9,87,340.28 18 Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. ( BEAM) 226.20 Cmt. 5,459.71 12,34,986.40 19 Providing and laying controlled cement concrete M.200 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies (SLAB) 169.00 Cmt. 6,388.22 10,79,609.18 20 Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level 3.30 Cmt. 6,036.06 19,919.00 21 Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. (Stair Case ) 26.40 cu.m 6,826.06 1,80,207.98 22 Providing and laying controlled cement concrete M.250 and curing complete Including the cost of formwork but excluding the reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. C.) Lintel 7.80 Cmt. 6,062.11 47,284.46 23 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level 3,40,562.6 5 kg 76.21 2,59,54,279.56 24 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in CementMortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional 557.81 cu.m 4,051.78 22,60,114.49 25 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) 2,895.51 Sq.Mt 167.03 4,83,637.04 26 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) + Extra over items 58 to 71 for plastering on ceilings and sofits of stairs upto floor two level instead of plastering on walls. 2,582.20 Sqm 164.97 4,25,985.53 27 20mm thick Sandfaced cement plaster on walls consisting of 12mm thk backing coat of C.M.1:3 (1 cement :3 sand) & 8mm thk finishing coat of CM(1:1)1 cement :1 sand at all levels etc complete as directed by EIC. 2,098.80 Sq.Mt 329.29 6,91,113.85 28 Big Sculpture: Providing and constructing and fixing on site 3D structure of required material(Approvedby consultant) including M-150 PCC base and M250 required pedestal, as per photo,drawing and instructions of EIC/ Consultant.All complete job as directed.Theme base Elements or Structures:- Providing, moulding, fabricating, sculpting, constructing, finishing, painting and installing fibre/ FRP/ Metel/ Stone/ Ferro cement/ Concrete/ Glass fibre reinforced concrete( GRC) Elements/Sculptures installation on site including all civil work required for installation as per instruction of EIC/ Consultants. The Elements/Sculptures installation made out of fibre/ FRP/ Matel/ Stone/ Ferro cement/ Concrete/ Glass Fibre reinforced concrete( GRC) shall also include required sub elements made and installed in required material and finish, all complete. The Elements/Sculptures installation shall have internal supports structure of mild steel angles, pipes, box sections etc. of required size and thickness. , 1.00 Each 11,11,000.00 11,11,000.00 The Elements/Sculptures installation shall be finished with weatherproof auto paint (metallic if required) in multi tone/ fully colored effects if required. The Elements/Sculptures installation shall be devloped based on photograph/image/artists impression/drawing of an approved theme and as mutually agreed by clients, consultant as well as selected agency. The Elements/Sculptures installation shall have an approximate size as mentioned below and pedestal height of minimum 1.2m/as required as agreed upon/instructed by the clients and consultant. The agency shall present mecquettes of all Elements/Sculptures installation before execution for approval by Architect Consultant. size as per detail drawing and selection by architect/EIC & Sample mock up shall be approved from architect /E.I.C (5 years warrenty /guranntee certificate) 29 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. 98.78 Sq.Mt 270.43 26,713.08 30 Providing & Fixing the G.I. welded wiremesh - 27 guage(Crimp Jali) of approved size applying between the RCC and masonry junction in proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali with nails, etc complete as directed by the site-in-charge. 277.12 Sqmt. 184.02 50,995.62 31 Providing and fixing eco-friendly light weight calciumsilicate false ceiling tiles having Tegular edge & 15 mmThick Densified edges on the Tile Periphery for ExtraStrength The Light weight calcium silicate ceiling tilesshall have , light reflection 85% noncombustible as perB.S. 476 part IV, 100% humidity resistance and alsohaving thermal conductivity0.043° w/m KC.for the bestthermal Insulation . The Light weight calcium Silicatetile shall be of approved texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globehaving NRC value of 0.75 NRC or equivalent of size 595X 595 mm to be laid on true horizontal level suspendedinter locking metal grid of hot dipped galvanized steelsections (galvanizing @120 grams per sqm includingboth side) consisting of main ‘T’ runner suitably spacedat joints to get required length and size of 24X38mmmade from 0.30 mm thick (minimum) sheet, 1200mmcentre to centre, and cross ‘T’ of size 24X28mm madeout of 0.33mm (Minimum) sheet spaced 1200mm alongspaced between main ‘T’ at 600mm centre to centre toform agrid of 1200X600mm and secondary cross ’T’ oflength 600mm and size 24x28mm made of 0.30 mm thick(Minimum) sheet to be interlocked at middle of the1200X600mm panel to form grid of size 600X600mmresting on periphery walls/partitions on a perimeter wallangle pre-coated steel of size (24X24X3000mm made of0.40mm thick (minimum) sheet with the help of rawlplugs at 450mm centre to centre with 25mm long drywall screws @ 230mm interval and laying 15mm thickDensified edges light weight calcium silicate ceiling tilesof approved texture (Fine Fissured/Cosmos/Spintone) inthe grid including, cutting /making opening for serviceslike diffusers, grills, light fittings, fixtures, smokedetectors etc., wherever required, Main ‘T’ runners to besuspended from ceiling using G.I. slotted cleats of size25X35X1.6mm fixed to ceiling with 12.5mm dia and50mm long dash fasteners, 4mm G.I. adjustable rodswith galvanized steel level clips of size 85X30X0.8mm,spaced at 1200mm centre to centre long main ‘T’ bottomexposed with 24mm of all Tsections shall be pre-paintedwith polyester baked paint, for all heights, as perspecifications, drawings and as directed byengineer-in-charge.Note:- Only calcium silicate falseceiling area will be measured from wall to wall. Nodeduction shall be made for exposed frames/opening (cutouts) having area less than 0.30 sqm. The calciumsilicate ceiling tiles shall have NRC. Value of 0.50(Minimum) for Fine fissured/Spintone/Cosmos and 0.75NRC for Globe, light reflection 85% non-combustible asper B.S. 476 part IV, 100% humidity resistance and alsohaving thermal conductivity. 0.043° w/m KC.for the bestthermal Insulation 31.68 Sqm 1,648.96 52,239.05 32 Finishing wall with weather proof exterior emulsion paint (with 7yrs. warranty period) on plastered surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materiels etc complete at all floors and all levels as directed by EIC. 3,885.84 Sq.Mt 114.53 4,45,045.26 33 Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand prepared smooth etc complete at all floors and all levels as directed by EIC. 3,690.67 Sq.Mt 40.59 1,49,804.30 34 Wall painting (3 coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth etc complete at all floors and all levels as directed by EIC. . 3,690.67 Sq.Mt 119.42 4,40,739.81 35 P & L 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit 63.43 Sqmt 1,397.83 88,664.36 36 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 95.30 Sq.Mt 995.81 94,900.69 37 Providing and fixing heat proof fire resistance Fire brick high Alumina brick on edge flooring in required pattern with bricks of class designation 8.0 on a bed of 12 mm Refractory clay, including filling joints with Refractory clay, using refrectory bricks of 9 x 4.5 x 3 inch size. 94.10 Sq.Mt 3,232.00 3,04,131.20 38 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick 1,070.50 Sqmt. 976.72 10,45,578.76 39 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. 654.75 Sqm 1,121.48 7,34,289.03 40 Providing and laying polished Granite Slab 18mm thick in Riser Jabs laid on 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. 99.96 Sqm 2,268.44 2,26,753.26 41 Providing and fixing flush door shutters, solid core construction with frame of first class hardwood with cross band and face veneer or plywood face panels,laminate,Batten patti including anodised alluminium butt hinges eith necessary screws. (B) Nondecorative type and block board core anodised alluminium butt hinges in flush door shutters. (2) 35 mm thick. 30.00 Sq.Mt 1,797.77 53,933.10 42 Providing and fixing window having extruded aluminum colour Powder coated section frame main outer size 63.50 x 38.10x 1.95mm (of Jindal section no. 4605@ Wt. 1.094 Kg/Rmt), horizontal two track member size 61.85mm x 31.75mm x 1.20mm (of Jindal section no. 8687, @ Wt. 0.695 Kg/mt),vertical member of size 61.85mm x31.75mm x 1.30mm (of Jindal section no. 8758 @ Wt. 0.659 Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section No. 8949 @ Wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal section no: 8947 @ Wt. of 0.456 kg / mt / section 8948, @ Wt. 0.457 kg/mt) with 5 mm th transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. 42.50 Sq.Mt 1,713.70 72,832.25 43 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (b) Ornamental Grill 1,880.00 kg 154.62 2,90,685.60 44 Providing and fixing M.S. grills of required pattern to wooden framesof windows etc. with M.S. flats at required spacings and frame alround,square or round bars with round headed bolts and nuts or by screws (A)Plain Grill. 1,551.00 Kg 102.62 1,59,163.62 45 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood,scrapers and sand paper with ready mixed priming paint brushing red lead. 51.60 Sqm 34.85 1,798.26 46 Painting two coats (excluding priming coat) on new steel and othermetal surface with enamel paint, brushing, interior to give an evenshade including cleaning the surface an even shade including cleanicnthe surface of all dirt, dust and other foreign matter. 51.60 Sqm 87.81 4,531.00 47 Providing and fixing standard extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal Section no. 2434@Wt. 0.634 (kg. per Rmt.) with colour anodized alluminum frame for ventilation with 5mm thick frosted glass as details etc. complete for ventilation. 4.29 Sq.m 1,175.56 5,043.15 48 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and outside locking with pushpull operation including the cost of hood cover and spring etc. complete. (B) Shutters having width 3.5 M. and above 26.50 Sqm 4,495.02 1,19,118.03 49 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like 10.25 Quintal 9,047.86 92,740.57 50 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. 226.13 Sq.m 727.13 1,64,425.91 51 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under :1) S.S. Handle for Door 15 Cm size of ASIS 304 Grade 10.00 Each 76.17 761.70 52 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under : 1) S.S. Aldrop 30 Cm long of ASIS 304 Grade 9.00 Each 400.58 3,605.22 53 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under :1) Latch (Tadi) as per sample approved sectional flats (Heavy) Alluminium 35 cms length & 16mm dia 8.00 Each 60.77 486.16 54 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under :1) Towel Rail Pair of C.P. Brass Brackets 60mm x 20mm 2.00 Each 320.13 640.26 55 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under : 1) S.S. Handle for door / window 10 Cm size of ASIS 304 Grade. 10.00 Each 54.78 547.80 56 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under :1) S.S. Stopper 30 Cm long of ASIS 304 10.00 Each 182.32 1,823.20 57 Supplying and fixing heavy quality fittings with best quality for doors, windows, ventilators with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineer-in¬charge. The fixture & fastenings shall be provided as under : 1) Locks Baby latch brass chromium 75mm long. 10.00 Each 269.62 2,696.20 58 Supplying and fixing heavy quality fittings with best quality with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineerin¬charge. 1) Bevelled edge mirror 600mm x 450mm 2.00 Each 233.67 467.34 59 Urinal partition : Providing & laying 16 to 18 mm thick both side mirror polished granite of approved shade and quality, seleted and sorted for uniform color for urinal partition/ division plate as per design and in required sizes and shapes after chasing /cutting of dado with cutter machine fixing shall be carried out in white cement sand mortar (1:1) with matching pigment and/ or necessary adhesive. (Only finished granite work shall be measured). All expose edges shall be champhered and polished. The rate includes making hole, cutting/ chasing, rounding champhering, edge polishing of edges. The work shall be carried out as per the approval of architect and engineer-in-charge. 3.60 Sqmt. 2,740.51 9,865.84 60 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 1.00 Each 603.19 603.19 61 Supplying and fixing heavy quality fittings with best quality with necessary brass screws, nails etc. complete as directed and as approved by Architect & Engineerin¬charge. The fixture & fastenings shall be provided as under : 1) Bevelled edge mirror 600mm x 450mm 2.00 Each 233.67 467.34 62 Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On 3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in Charge.A.) 3D Letter Height 90cm x 10cm x Wide & Req. Depth 36.00 Each 13,938.00 5,01,768.00 63 Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On 3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in Charge.B.) 3D Letter Height 60cm x 6cm x Wide & Req. Depth 36.00 Each 11,034.25 3,97,233.00 64 Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On 3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in Charge.C.) 3D Letter Height 30cm x 4cm x Wide & Req. Depth 36.00 Each 7,549.75 2,71,791.00 65 Providing & Fixing Prefabricated Opaque Colour 3mm Thick Acrylic Sheet Cut Letters of For Sign Board and V.M.S.S. Logo with Inside Led (Ge-USA Make With 5 Years Unconditional Warranty) Lights Fixed On 3mm ACP Sheet Boxes with Ms Angle Frame to Be Fixed on R.C.C. Beam or On Masonry with Plaster at Any Height Including Lifting, Hoisting and Fixing with Finishing Colouring etc. Comp. Letters May Be Gujarati or English as Per Architects detail Drawings and Instructions and As Directed by Engineer in Charge.D.) V.M.S.S Logo of Appropriate Size Height Up To 90cm 2.00 Each 18,584.00 37,168.00 66 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately) (A) vitreous China Pattern :(i) in white colour 4.00 Each 1,303.71 5,214.84 67 Providing and fixing Urinal or approved quality including connecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm. 6.00 Each 1,036.27 6,217.62 68 Providing and fixing washbasin with single hole for pillar tap with M.S. brackets painted white including setting holes and making good the same and including all fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. including providing and fixing C.P. brass waste for washbasin. (B) 40mm dia., including providing and fixing M.I. fisher union for washbasin. (B) 40mm dia. etc. complete 3.00 Each 1,560.84 4,682.52 69 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jail of the following nominal diameter of self cleansing design with C.I screed down or hinged grating including the cost of cutting and making good the walls. 11.00 Each 558.36 6,141.96 70 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. 3.00 Each 308.73 926.19 71 Providing and fixing brass screw down stop tap. (A) 15mm dia. 9.00 Each 205.83 1,852.47 72 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete. (ii) 25mm dia. 6.00 Each 263.77 1,582.62 73 Providing and fixing screw down bib taps of following size. (A) Brass screw down bib tap polished bright. (i) 15mm dia. 5.00 Each 186.83 934.15 74 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. (C) 100mm dia. 4.00 Each 615.63 2,462.52 75 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton) 4.00 Each 1,292.19 5,168.76 76 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 40 mm. 500.00 Rmt 442.04 2,21,020.00 77 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[C] 25 mm. 300.00 Rmt 249.72 74,916.00 78 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [A] 15 mm. 300.00 Rmt 166.86 50,058.00 79 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592- 1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. 500.00 Rmt 835.15 4,17,575.00 80 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer. 16.67 Each 11,029.97 1,83,869.60 81 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. 20,000.00 Litre 3.95 79,000.00 82 Supplying and fixing reinforced concrete heavy duty non-pressurepipes with collars for culverts carrying heavy traffic as per IS 458-1991specifications including setting the pipes in C.M. 1:2 watering andlaying (to level or slopes) of class NP3 of following internaldaimeters.(i) 300mm dia. 150.00 Rmt 649.92 97,488.00 83 Providing, laying and jointing in true line and level 110 diametreU.P.V.C (Type B) conforming to IS 13592- 1992 with one end plainand other end socketed with rubber ring, & fittings conforming to ISI14735-1999 of approved make for drainage system pipe line, pipeshall be jointed with each other with rubber lubricant, pipe shall befixed on wall using of PVC clamp of the size 110 mm diametre x 149mm length x 145 mm heigh at every 2000 mm center to center or shallbe concealed in walls as directed including necessary fittings such asbends, shoes etc. including testing of pipes and joints and jointed withadhesive solvent cement including cost of all materials. 200.00 Rmt 835.15 1,67,030.00 84 Providing and fixing Slotted cowl (terminal guard ) 75 mm dia 10.00 Each 217.15 2,171.50 85 Preparing structural design of RCC Under Ground / Partially underground / above high ground level Reservoir of required capacity as per relevant I.S. standards and constructing the same, including excavation in all types of soil strata (including rock) including shoring strutting if required, for loose soil / to protect from collapse, casting 100 mm thick P.C.C. levelling course in M-15, Refilling the pit with proper soil and disposing of the surplus stuff at all lead. Including cement plaster in CM 1:2 with approved water proofing compound to all over inside container (i.e. walls, base, top slab/dome bottom etc. all). Including all types of labour and material charges of lowering, laying, erecting / hosting and jointing of pipe assembly to inlet, outlet overflow, washout and bye pass arrangement as per hydraulic design. Providing and fixing accessories, CI Manhole frame and cover, water level indicator, adequate cowl type ventilators or lantern type ventilator with stainless steel jail. RCC chambers for valves. Providing and applying three coats of cement paint / snowcem to the out side face of structure. It also includes satisfactory water tightness test as per relevant I.S. code and painting name of scheme and capacity on the tank as per direction of engineer in charge.List of Indian Standards for Design of GSR / SUMP: -The structural design of GSR shall be in accordance with provisions relevant I.S standards.(1) I.S. 3370 part I & II 2009 or Its latest revision(1.1) I.S. 3370 part III & IV 1965 or Its latest revision(2) I.S. 456 – 2000 or Its latest revision.(3) I.S. 1893 – 2000 – 1984 or Its latest revision.(4) I.S. 875, Part – 1 to 3, 1987 or Its latest revision.General Specifications: -(1) Water depth in container shall be adopted as per data of tender. Capacity shall be calculated excluding free board of the reservoir. If water depth is not specified, the suitable water depth / 40,000.00 Litre 5.49 2,19,600.00 acceptable to field engineer in accordance with hydraulic requirement.(2) Shape of container (in plan) specified by in data shall be adopted in absence circular shape shall be adopted.(3) Size shall be fixed as per availability of space (land area) at site / acceptable engineer in charge.(4) Effect of overlapping of pressure bulbs on soil due nearby structure and proposed sump should be considered.(5) Care shall be taken that no damage should occur to nearby existing structure. Compensation shall be paid for the same by agency.(6) The minimum concrete grade for RCC shall be M30.(7) HYSD Fe 415 / 500 grade reinforcing bars confirming to I.S. 1786 / 1139 shall be considered in design. CRS / TMT bars shall be provided. In saline atmosphere corrosion resistance stainless steel / HCR rebar shall be provided. Any other steel can be used with approval of C.E./ in situation of non-availability in market without extra cost.(8) Minimum size (or thickness) of various components shall be provided as per tender criteria / specifications in absence asper I.S./ Std. practice of G.W.S.S.B. Minimum dimensions specified for various components in tender data / specifications shall be provided without fail.(9) The safe bearing capacity (SBC) shall be referred from SBC test report. In absence of report it shall be referred from datasheet. If poor soil is found / water table is met with during excavation SBC shall be scientifically ascertained and design shall be revise. No extra shall be paid for increase in quantity.(10) DI pipes and special shall only be used if type is not specified in tender.(11) The rate shall include cost of dewatering during excavation making all arrangement when water table meets within depth.(12) The structure shall be designed properly to resist uplift due to ground water table specified in data or actual ground water table meets with during excavation. If GWT / Uplift is mentioned in tender and during excavation it does not meet 7.5% rate shall be reduced.(13) SS pipes railing shall be provided over sump periphery when sump height is ≥ 1.5 meter above ground level.(14.a) RCC staircase/RCC Steps should be provided from GL to sump top slab based on the height of the GSR above/below the ground.(14.b) RCC Staircase with SS railing to be provided inside reservoir container. BB Masonry stair cabin to be provided to cover the same with MS safety door having locking arrangement.(15) Appearance of structure should be aesthetically good looking acceptable to authority.(16) Any change in size, shape, depth below GL, height above GL, water depth, F.B., size of member etc can be permitted in exceptional case due to site condition or hydraulic design requirement by C.E. No extra shall be paid for change.(17) Any change in data, dimensions, shape, water depth, reduction in size if permitted by competent authority and if it reduces quantity then payment shall be reduced prorate.(18) When capacity of GSR / Sump is > 20 lakh litres two or suitable compartments acceptable to executive engineer shall be designed and provided.(19) Agency shall engage qualified (at least graduate) consulting engineer for designing the structure and he / she shall visit the site for guidance of work.(20) 75%-part rate shall be payable for concrete, reinforcement and plastering items of container until satisfactory hydraulic testing for water tightness is performed as per tender condition. Till the work shall be treated as incomplete. Above conditions / general specifications Sr. No. 1 to 20 are part and parcel of tender (contact) and prevail over other provisions in tender. FURNITURE WORK 86 Providing And Placing: Fix Multi-Purpose Fabric Chair Specification: Office Seating Type: * All Over Size Is : 580mm(L)X 760mm(D)X 930mm(H) , *The Chair Made Of Full Fabric In Black Colour . It Will Comes In Matte Finish In Contemporary Style. Details: * Arms: Fixed Armrests. * Use Of Ply: 12 Mm Thick Hot Pressed Bwr Plywood (Is Grade - 303 For Seat And Back) . * Seat: 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Seat, * Back : 40 ± 2 Mm Thick Polyurethane Foam With Density 32 (±3) Kg Per Cu Meter For Best Quality Cushioning In Back . Backrest Support Foam Design Based On Symmetrical Lumbar Support Seat Max Height Is @ 930mm . * Base : 4 Legs Metal Powder Coated . * The Product by The Seller / Company Should Be Iso 9001:2008, Iso 9001:2015, Iso 50001:2018, Iso 14001:2015, Ohsas 18001:2007, Green guard, Green Pro, Aiota, Indian Design Mark And Fsc Certified. The Bidder Should Be A Member Of Bifma And At Least Two Products Of The Oem Should Be Certified As Bifma Compliant And An Official Product Official Link/Screenshot Of The Product Listing Must Be Provided From Www.Bifma.Org. 4.00 Each 7,575.00 30,300.00 87 Supplying and placing in position of office desk office desk structure of rectangular shape. primary work surface over all size is 1500mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of 25mm thick prelaminated particle board work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue . modesty pannel made of 18mm thick, wire management hole with pvc grooment on table top.construction right side of table top is based on a fixed pedestal 3 drawers & from left side of table top is based on 18mm thk engineered wood pvc edge banding pedestal back,top,bottom & drawers are made of 18mm thick with 1 cpu trolly made in black metal powder coated.fixed pedestal:l:410mm(l)x 580mm(d)x 750mm(h) ,in provided with cetnral lock for security and handles are provided for easy of opening.overall construction of pedestal is 18 mm along with fecia of drawers. three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest ,The product shall be from ISO 9001:2015,ISO 50001:2011, ISO 14001, OHSAS 18000 , BIFMA, FSC, AIOTA, SEDEX & Greenguard Certified company and complete as per the approved sample and as per the direction of Engineer-In-Charge. 2.00 Each 20,200.00 40,400.00 88 Supplying, and placing in position of beckett/g/a/1830 filling storage ,material : mild steel,size 900mm(l)x 450mm(d)x 1830mm(h) colour : munshel grey & samok grey / finish : epoxy polyester,weigth of product : 73 kg approx,construction : co2 welded .providing & suppling placing position of modular filing storage body made out in 22 gague(0.8mm) & door 20 gague(1 mm) crca sheet. 4 adjustable shelve in 22 gague(0.8mm) & pedestal 18 gague 1.2 mm crca sheet.having four shelves making five compartment, fitted with ms body lock & handle. with 2 numbers of glass door shutters , the glass used shall be 4mm thick clear.these components shall be made of crca ‘d’ grade high yield strength as per is:513 & is:304 grade. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt . uniformly distributed load capacity of each shelf shall be 30 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel and shelf shall be made of high yield strength,the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 50-60 microns(+/-5 micron).packing : 5 ply corrugated box or ply,epe foam with all four corner & sides protection properly pp straped,packet comes i n 1 box. .The product shall be from ISO 9001:2015,ISO 50001:2011, ISO 14001, OHSAS 18000 , BIFMA, FSC, AIOTA, SEDEX & Greenguard Certified company and complete as per the approved sample and as per the direction of Engineer-In-Charge. 2.00 Each 25,250.00 50,500.00 89 VISITOR CHAIR :- Providing & Supplying of visitor Chairs, having single touch adjustable seat , Frame construction should be of nylon & black in color having dimenssion of 1200mm Ht., 475mm width & 431 mm Depth & Back cushion Ht. sholud be 535 mm. It should have Nylon base Arms, Armrest is T fixed.having ht. of 260mm, It should have minimum 5 years warranty. Complete as per instructions given by the Architect & Engineer Incharge & as per shown in the View. Samples should be approved by the Architect & Engineer Incharge. Please see the Attached Make List for Apporoved Makes.like wipro,( Model : Smart Fabric :- Plano - Delta) 3.00 Each 4,545.00 13,635.00 90 Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead. 362.75 cu.m 104.20 37,798.55 91 TRIMIX ROAD : Providing & Laying 15.0 cm thick M200 grade controlled cement concrete without fly ash trimix usinng P21(water reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of cement including making C channel 75 x 75 mm required to maintain level,slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power floater & trowel light brooming the surface & including Construction joints to be formed at every 5 mt distance by grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 5 mm width and depth min (1/3 rd depth of the pavement) as shown in the drawing and shall be filled with ready to use PU sealant of UV gradecutting & filling of expansion joint as directed by Engineer in charge. 539.00 cu.m 4,968.90 26,78,237.10 92 Supplying and filling premolded bituminous joint filler. 12 mm Thick. 3.00 Cumt. 553.79 1,661.37 93 Providing, laying and fixing of 80mm thick(M 45 grade) RUBBER MOULDED interlocking coloured paver block as per design given by Engineer Incharge with 75mm thick sand bed layer, watering, compacting, paving. with compact by mechanical compacter etc. complete as per specification 960.00 Sqmt. 788.81 7,57,257.60 94 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. 1,440.00 Rmt 361.64 5,20,761.60 Rain water Harvesting / BORE WELL 95 Drilling 300 mm dia. pilot hole hydrolic drilling machine & drilling trully vertically (testing by vertically test) bore hole in alluvial strata, any kind of soil incl. sand, murrum, hard murrum, soft rock, hard rock incl. cost of bentonite powder done by mud flushed rottary equipment bore hole should stand atleast for 27 hrs. incl. lowering the pipes in position as directed and incl. supplying and packing gravel of 4 mm to 6 mm size etc. comp. as directed. 275.00 Rmt 1,904.05 5,23,613.75 96 Supplying and fixing 250 mm dia PVC casing pipe & strainer pipe CM ISI pipe of duke or approved make of approved quality and fixing confirming to ISI suitable bore and screwed & socketed without any defect crack etc. incl. supplying & fixing coupling, 250 mm dia top cap, Bail plug & clamp with nut bolt & other necessary accessories and welding etc. comp. as directed. 275.00 Rmt 2,436.12 6,69,933.00 97 Development of hole by air compressor having capacity 400 cfm/ 100 psi till sand free discharge of water incl. testing of water supply flow etc. comp. as directed. 1.00 Job 25,398.67 25,398.67 98 Supplyig apporved quality gavel of 4 to 6 mm size of work etc. comp. as directed. 25.00 cu.m 5,937.59 1,48,439.75 99 Supplying & Fixing 50 mm dia UPVC column pipe approved make with necessary fittings like long threaded couplins, bend, T, Elbow, etc. required as per directed. 200.00 Rmt 455.71 91,142.00 100 Supplying & Fixing 50 mm dia heavy top bottom piece, G.I. Bend, Coupling, sand guard MS clamp with Nut Bolt etc. complete as directed by EIC. 2.00 Set 6,952.03 13,904.06 101 Supplying submersible pump set for bore of 200 mm. dia or more having three phase motor capcity not more than 15 H.P. and having (12 stage) 350 LPM discharge at the head about 160 mtrs suitable for 50 mm dia. Delivery pipe Cat III of KBS/ UNEEL/ Kirloskar/ Lubi 1.00 Each 59,994.00 59,994.00 102 Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator (AC- 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete unit), Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each with two way selector switch incoming wires duly socket Crimped, Panel to be erected on angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay, thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on angle iron frame ground on wall. (d) S/D up to 15 HP 1.00 Nos 20,664.60 20,664.60 103 Providing and erecting ISI marked PVC isulated PVC shethed Flat flexible submercible copper cable apporved make of 3 Core x 4 Sq.mm. size. 300.00 Rmt 143.02 42,906.00 104 Water Analysis test in Govt. approved laboratory incl. all water testing etc. comp. as directed. 1.00 L/S 3,914.76 3,914.76 .... more in document
