Tender For Furnishing And Electrical Works For Pnb Sarainaga Branch MANAGER CABIN PARITITON WITH GLASS :- Manager cabin 4’-6” height. Providing and fixing partition from floor level up to the level of false ceiling with frame work of Aluminium strips(2”x2” Jindal/ ISI Mark) fixed at 2’ centre to centre covered with 10 mm. comm. ply confirming to IS303. For Low Height partition and Full height Fully/partially glazed partition, the glazing shall be done with 10.00 mmthk. Float glass confirming to IS 14900, enclosed in frame with bank logo and etching. complete to the satisfaction of Architect / Employer ( 80% glass work and 20% wooden partition) Sqft s 180.00 2 LOW HEIGHT PARTITION WITH GLASS 5’-0’ height :- specfications same as item no 1 Sqft s 130.00 3 CASH CABIN PARTITION 7’-0” height:- Providing and fixing partition from floor level up to the level of false ceiling with frame work of Aluminium strips(2”x2” Jindal/ ISI Mark) fixed at 2’ centre to centre covered with 10 mm. comm. ply confirming to IS303. For Low Height partition and Full height Fully/partially glazed partition, the glazing shall be done with 8.00 mmthk. Float glass confirming to IS 14900, enclosed in frame with bank logo and etching.complete to the satisfaction of Architect / Employer Sqft s 90.00 4 REAR PARTITIONS WITHOUT GLASS NEAR STRONG ROOM Specifications Same as item no 3 Sqft s 0.00 5 REAR PARTITIONS WITHOUT GLASS FOR UPS ROOM IN ATM ROOM Specifications Same as item no 3 Sqft s 100.00 6 CASH COUNTER:- For customer as per layout with provision of 3’-9” high, 2’-6” deep with shelf for CPU and storage unit out of 18 mm thick commercial board with 1.00 mm thick laminate Mica on all exposed surfaces. Cedar and skirting out of burgundy laminate SS hardware, with wire manger, key board tray with telescopic slides. All edgings Margin etc. out of polished steamed beech / white cedar /rubber Wood including under the each Counter on right side a storage unit with 2/3 drawers and under Almirah with door along with Lock and key. Rft 5.00 7 COUTNERS (LOW HEIGHT) For customer as per layout with provision of 2’-6” high, 2’-6” deep with shelf for CPU and storage unit out of 18 mm thick commercial ply board with 1.00 mm thick laminate mica on all exposed surfaces. Cedar and skirting out of burgundy laminate SS hardware, with wire manger, key board tray with telescopic slides. All edgings. Margin etc. out of polished steamed beech / white cedar /rubber Wood including under the each Counter on right side a storage unit with 2/3 drawers and under Almirah with door along with Lock and key. Rft 23.00 8 FALSE CEILING IN BANKING HALL :- Providing & fixing white mineral fiber tile (size 24” x 24”) / equaling false ceiling with G.I. frame T angle (size 24” x 24”) aluminum frame work. The frame channel should be suspended from the R.C.C. slab strap hangers. 12 mm thick board panels shall be screwed to the frame work with steel screws. All additional frame work required for light points. Fitting shall be provided. Sqft s 550.00 9 GYPSUM FALSE CEILING IN BANKING HALL :- Sqft s 430.00 10 Providing and fixing of 12 mm thick Toughened glass panels with pencil polish (half round edge) by automatic plant mirinti/chap wood brackets in front of counter Frosted glass with etching & Bank Logo. Sqft s 40.00 11 Providing & fixing customer table/stand shall be made of mirinti/chap wood frame. The table top shall be made be 3/4’’ block board with mica. Pcs 1.00 12 Aluminum grill 8 mm thick in cash cabin ceiling with the fitting in wooden frame:- Sqft s 50.00 13 12 MM THICK TOUGHENED GLASS MAIN ENTERNACE DOOR BRANCH AND ATM :- Fully Toughened glass 12 MM thick with 6” Powder coated Aluminum section on top and bottom with bank logo and etching with necessary fittings and material etc. including Fully Toughened glass as per brand manual i/c SS handles, Lock and Ozone floor Machine etc. Sqft s 130.00 14 Godrej night latch lock in cash cabin Pcs 1.00 15 Door Closer Pcs 3.00 16 Manager Table :- 6’-0” x 3’-0” X 2’-6” H Providing and fixing CM TABLE 6’-0”x 3’-0”x2’-6” (ht.) and 10mm beveled glass with etching of approved make to be fitted on top obtain the total height of 2’-6” as per detailed drawing . made up of 19 mm commercial board of approved make the finished with 1 mm thick laminate of approved make and shad as approved as par detailed drawing. Table shall be provided with 3 drawers sliding on telescopic channels with proper locking arrangements and keyboard with telescope channels tabletop shall be finished with 1.0 mm thick laminate of approved shade & quality . The work includes provided and fixing locks , wire manager, spirit polishing of steam beach bending etc. complete in all respects to the entire satisfaction of the architect. Pcs 1.00 17 ACP WALL PANELING:- P/f ACP Panel laminate finished Single face wall paneling on existing wall surface, using 1”x2” G.I. framing vertical & horizontal member at 2’0” c/c on both ways with cross halve joints including screwing and the same fixed rigidly to floor, wall. Frame covered with ACP Panel finished with matching as per detail/ instruction complete. The edge to be finished with Aluminimum Composite Panel. Note:- only ACP work to be done. ACP (Aluminimum Composite Panel) Paneling is in colour as per brand manual. Sqft s 320.00 18 Wooden Side Unit:- Wooden side unit with 2 drawer, one shelve with front door fully complete. 3’x1’-6”x2’-6” height Pcs 2.00 2-6x1-6x2-6 height Pcs 5.00 19 Full Height Storage:- Providing and fixing Low height storage 400mm deep made out of 19mm commerical board finished with 1.0mm laminate in all exposed areas. The drawers to be made out of 19mm thick commerical board in the front cladded with 1.0mm laminate (color, vertical grain). sides to be made out of 6mm plywood duly painted in matching tone and it should play on drawer sliding channels. The shutters to be made out of 19mm thick commerical board and should play on drawer sliding castors on powder coated channels. The necessary locks, handles, etc to be provided. Inside of the unit to be patsed 0.8 mm htick White mica . All the exposed edges of the boards / plywood’s to be covered with wooden lapping / moldings duly polished all complete. Sqft s 185.00 20 Anti Termite treatment in the furnishing work. Sqft s 600.00 21 NOTICE BOARD TAG IN TYPE: Size (4X3) Providing & fixing Notice Board the tag board of approved make & design, of size 3 X 4, with anodized aluminum boarder/frame type. The board should be3/4 th. Straw board with velvet type fabric lining of apprd. Color. Pcs 2.00 22 PIN-UP BOARD:- size 3’x2’ Pcs 2.00 23 SUGGESTION & CHEQUE DEPOSIT BOX: P/F a suggestion box of size up to 1-3x1-6x7 made out of 3/4 commercial board with 1.0mm laminate on top as per design. Supply & fitting of all electrical point omplete with testing, commissioning ,handling , storing , all material for wiring of light point, fan, exhaust fan, socket,& bell point 5 amp with 1.0 , 1.5 sq mm cu wire in PVC pipe with accessories i.e. bend JB , tee etc concealed/ surface on wall with saddle screw etc. controlled by 5 amp switch on plate with box in wall Pcs 55.00 2 Same as above but for 15 amp switch/socket with 2 x 2.5 + 1 x 1.0 sq mm cu wire in PVC pipe Pcs 17.00 3 Supply & Fixing of electronic regulator including the Wiring for it as per above item, compete in al respect. Pcs 4.00 4 CIRCUIT WIRING: (a) Supply, wiring, testing & commissioning of Circuit wiring for light, Fan, Exhaust fan, Socket board to main MCBDB with 2 x 1.5mm & 1 x 1.o sq mm earth wire in PVC Conduit pipe including cutting, repairing and painting etc. Wiring for power point with 2 x 2.5 cu wire + 1 for earth in PVC pipe fitted on wall with Saddle & screw etc including cutting, repairing and painting etc. Rmt 230.00 6 Wiring for A.C. point with 4 core x 10 sq.mm cable. Rmt 180.00 7 TELEPHONE POINT & WIRING Supply & fixing of GI / PVC box suitable for fixing of Telephone jack or 2 pin telephone socket as required with 2 pair of 0.63 mm Die annealed tinned copper conductor In PVC pipe for each telephone complete in all respect As per drawing and specification give by architect Pcs 4.00 8 Supply & fixing of 4.0 sq mm copper wire on Main Board Rmt 50.00 9 Supplying and Fixing of LED down light fittings Havel’s /Crompton /Philips / Wipro make Pcs 24.00 10 Main LT Panel/DB Supply and installation of main LT Panel, wall mounted front Operated totally enclosed vermin proof, Indoor nor-draw out- Cubicle type power panel fabricated out of 2 mm thick CRCA Sheet having gasketed hinged cover on each cubicle fully Powder coated/enamel. a. 1 no., 160 A, FP, Changeover Switch 2 No., 160 ATP, MCCB With ELR (0-3A) and CBCT as Incomer. b. 10 nos. 40 A & 2 nos. 63 A, TPN,MCB Outgoing c. 9 nos. 25 A, SPMCB outgoing. d. 9 nos. 20 A, SP< MCB outgoing e. 3 No. 0-150 A, Ammeter with CT and selector switch f. 3 no. 0.500 V, Voltmeter with selector switch and fuse g. 1 Set, TPN, Copper bus bars of size 25mmx5 mm thick PVC Insulated suitable for 160 amp load h. 1 Set RYB indicating lamps with resistors and fuses Full set as above Note : Panel of Minimum 160 Amp load having 2 changeover to support extra load of minimum 5 A.C.’s of 1.5 Ton each along with regular load of Branch as mentioned in tender set 1.00 11 4Way SPN DP with 2 nos. DP MCB For UPS incoming Pcs 1.00 12 4 way TPN DB with 1 TPN MCB + 10 MCB P c s 2 . 0 0 13 8 way SPN DB with 1 No. DPMCB + 6 MCB for UPS Circuit Pcs 2.00 14 63Amp DB 2 pole Pcs 5.00 15 Ear thing with 50x3 M. ear thing electrode With chemical as specified items instructed by the Architect for L.T. Panel. Pcs 3.00 16 A.C. Points i/c Box, MCB, Socket, Switch i/c 32 (C) MCB complete Pcs 6.00 17 Supply & fixing of ceiling fans 1200 mm Pcs 4.00 18 Supply & fixing of light fixture 4’ Led Pcs 14.00 19 Supply & fixing of Exhaust fan with lovers 18” Of commercial/Industrial quality Pcs 2.00 20 Supply & fixing of Exhaust fan with lovers 12” Of commercial/Industrial quality Pcs 1.00 21 Supply & fixing of fully metal body wall fans Pcs 10.00 22 Supply & fixing of LED (2’x2’) fittings Havel’s /Crompton /Philips / Wipro make). One Switch Board 5 Amp Switch 08 no Comprising 4 Switch + 4 socket Modular Pcs 11.00 2 Supply & fixing of 4 Way MCB SPN DB & 2 no of 32 Amp DP MCB for UPS input/output supply Pcs 2.00 3 Supply & fixing of 8 way SPNDB with 8 no. Of 10 Amp & 20 Amp SPMCB complete in all respects Pcs 2.00 4 UPS Board 2x2 Pcs 1.00 5 Supply & fixing of 4.0 mm copper wire Rmt 80.00 6 Supply & fixing of 6.0 mm copper wire Rmt 70.00 7 Supply & fixing of porcelain fuse 63 Amp with neutral Link Supply/Laying of Cat 6 Cable Rmt 330.00 2 Patch Cord 2 Meter Pcs 11.00 3 Patch Cord 1 Meter Pcs 11.00 4 I/O Box Pcs 11.00 5 RJ 45 Connector Pcs 48.00 6 Data Hub Tray Pcs 1.00 7 Cable Manager Pcs 1.00 8 S/F 9U rack with fan and others items complete Pcs 1.00 9 9. Supply, Installation, testing and commissioning of 24 Port patch panel & 2 Port Switch complete
