Tender For Civil Work - Work Of Toilet In Ward Olandganj - Cleaning Of Grass, Bush, Wood, Trees And Sapling Girth Up To 30Cms Measured At The Height Of 1M Above Ground Level And Removel Of Rubbish Up To A Distence Of 50M Outside The Periphery Of Area Cle, jaunpur-Uttar Pradesh

Tender For Civil Work - Work Of Toilet In Ward Olandganj - cleaning of grass, bush, wood, trees and sapling girth up to 30cms Measured at the height of 1m above ground level and removel of rubbish up to a distence of 50m outside the periphery of area cleared 2 Earth work excavation in ordinary soil for foundation including lead upto 30.00m and lift upto 1.50 m all complete SI No.- 251 3 Providing and laying in cement concrete 1:6:12 with cement, fine sand and 40mm brick ballast and curing complete. SI NO.- 275 4 Providing and laying PCC 1:2:4 with cement, coarse sand and 20mm stone grit in Septic tank including all complete for proper completion of the work. Sl No.279(b) 5 M150 brick work in 1:4 cement and coarse sand mortar in foundation upto plinth level including in all complete SI No. 305B 6 Providing and laying R.C.C. in plinth beams with 1:1.5:3 cement, coarse sand and 20mm stone grit and axcluding supply of steel but including its fixing and binding curing complete and including all complete for proper completion of the work. Sl No.284(b) 7 Mild steel or iron work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work and including supply of steel Sl. No. 504 8 Earth work filling including all complete 9 M150 brick work in 1:4 cement and coarse sand mortar in Super structure including in all complete Sl No. 305B 10 Providing and laying 12 mm thick plaster with 1:3 cement and coarse sand mortar on Ground floor walls. Sl No.583 11 Providing and laying R.C.C. in lintels in doors and windows and slabs with 1:1.5:3 cement, coarse sand and 20mm stone ballast and axcluding supply of steel but includin its fixing and binding curing complete and including all complete for proper comletion of the work. SI N0.284(b) 12 Mild steel or iron work such as reinforced concrete wrought to required shape as necessary Tincluding bending for proper completion of the work and including supply of steel Sl. No. 504 13 Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade. Including supply of all material, labour and T & Petc required for proper completion of the work Sl No.- 660+661 14 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR-13.80 15 Providing and laying in cement concrete 1:6:12 with cement, fine sand and 40mm brick ballast and curing complete. SI NO.- 275 16 supply and fixing 6mm thick china glazzed tiles of first quality in skirting or dedo fix with cement mortar finished with white cement slurry jointing and polishing complete including all cost of labour material T&P etc..... 17 supply and fixing of anodized aluminum doors having 2mm thick aluminuym section excluding coating and an average coating of 20mm micron fully glazed of aluminum door tube size 83.5x44.65 mm as vertical member and 1140x44.50mm size tube in bottom and 17 horizontal member door chaukhat should be of aluminum tublar vertical wibt two open able shutter the rate will including cost of material fixture 4mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper completion of the work as per direction of engineer in charge 18 Supply and fixing 6 mm thick china white/coloured glazed tiles upto 300 X 300 mm size in wall tilesor dado laid with 1:3 cement and approved coarse sand mortar finised and jointed 375.17 with white cement slurry and pigment & polishing complete including supply of all compete. 19 Providing & Fixing in position collapsible steel shutter with verticle channels 20x1.0 with top and bottem rails of T iron 40x40x6mm with 38mm dia steel pulleys with bolt nuts locking arrangement stopper handles comlete 20 providining and fixing white Vitreous china orissa patterns WC pan of size 580x440MM with Integral type foot rests 21 providining and fixing whitr Vitreous china pedestal type water closet(European type) with seal and lid 10 litre low lwvwl whote vitreous china flushing cistern & CP flush bend with Fitting & CI bracket 40mm Flush bend overflow arrangement with sp patterns WC pan of size 580x440MM with integral type foot rests 22 providing and fixing white vetreous china flat back or well corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic cistern with standerd 2.00 flush pipe and CP brass spreaders with brass unioon and one urinl vbasin with 5litre whiote PVC autoametic flushing cistern 23 Providing and fixing wash basin CI brackets 15mm CP brass pillar taps, 32mm brass waste of standard pattern, including painting of fitting and brackets, crltting and making good the walls White vitreous china angle back wash basin size 600x480mm with single 15mm CP brass pllartaps 24 Providing and fixing chlorinated polyvinayl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including tesiing of joints complete as per direction of Eagineer in charge. concealed work, Including cutting chases and making good the walls etc. 25mm dia 25 Providing and placing on terrace (at all floor levels) Polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrengement and making necessary holes for inlet, outlet and ovreilow pipes but without fittings and the base 26 Providing and fixing 8mm dia CP/SS jet with flexible tube upto 1 metre long with SS triangular plate to Eureopean type WC of quality and make as approved by Engineer-in-charge. 27 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 32mm dia 28 Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass scaews and washers complete. 29 providing and fixing balve valve (brass) of 29 approved quality. High or low pressure, with plastic foats complete 25 mm dia 30 Providing and Fixing PTMT bib cock of approved quality and colour. 15mm nominal bore 90mm long, weighing not less than 93qms. 31 Providing and fixing PTMT stop cock of approved quality and colour 15mm nominal bore, 86mm long weighing nol less than 88grm. 32 Providing and Fixing PTMT soap dish holder having size 138x102x75mm with concealed fitting arrangement weight not less than 106grm 33 Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality conformino to IS:8031 15mm nominal bore 34 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick 35 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 100x58x1.90 mm 36 Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete 300x20x6 mm 37 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm 38 Steel work in small section such as grill window railing etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 39 Supply and fixng of 10cm. Internal AC down pipes complete wilh rose heads bends and gratings and including supply of necessary MS clamp 25cm x 3mm fixed to walls, with and including supply of 15cm long 6mm dia nails all materials labour and T&P etc. required for proper completion of the workand also including repair of plaster, pointing etc ifdamaged during fixing of the pipes 40 Add Electrification i/c all complete

INR 2060 /-

INR 15.59 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB