|
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps ofsuchtreescutearlier anddisposalofunserviceablematerialsand stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.By Mechanical Means.In area of non-thorny jungle |
| 2 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 3 | Anjani fala km 0/0 to 3/0 |
| 4 | Peeth Duka to Dhanmalia |
| 5 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirementofTable300-2withleadupto50masperMoRTH Specification Clause 305.3 |
| 6 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 7 | Anjani fala km 0/0 to 3/0 |
| 8 | Peeth Duka to Dhanmalia |
| 9 | Providing, laying, spreading and compacting graded stone aggregate to wet mixmacadamspecificationincludingpremixingthe material withwaterat OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site,laying inuniformlayersinsub-base/basecourseonawell prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406.By Mechanical Means with all lead |
| 10 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 11 | Anjani fala km 0/0 to 3/0 |
| 12 | Peeth Duka to Dhanmalia |
| 13 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 14 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 15 | Anjani fala km 0/0 to 3/0 |
| 16 | Peeth Duka to Dhanmalia |
| 17 | Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared non-bituminous surfaces (cement concrete pavement) cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 18 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 19 | Anjani fala km 0/0 to 3/0 |
| 20 | Peeth Duka to Dhanmalia |
| 21 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paverfinishertotherequiredgrade,levelandalignmentandrolled to achieve the desired compaction as per MoRTH Specification Clause 504.Bitumen (VG-30) |
| 22 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 23 | Anjani fala km 0/0 to 3/0 |
| 24 | Peeth Duka to Dhanmalia |
| 25 | Providing,layingandrollingofopen-gradedpremixcarpetof20mm thicknesscomposedof13.2mm to5.6mmaggregateseitherusing Viscositygradebitumenoremulsiontorequiredline,gradeandlevelto serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510.Case - IIBy Mechanical Means.Bitumen (VG-30) |
| 26 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 27 | Anjani fala km 0/0 to 3/0 |
| 28 | Peeth Duka to Dhanmalia |
| 29 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511.By Mechanical Means.Case - II:Type B.Bitumen (VG-30) |
| 30 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 31 | Anjani fala km 0/0 to 3/0 |
| 32 | Peeth Duka to Dhanmalia |
| 33 | ReinforcedcementconcreteM15 gradekilometrestone/localstoneof standarddesignasperIRC:8fixinginpositionincludingpaintingand printing, etc as per drawing and MoRTH Specification Clause 801.Ordinary Kilometer Stone (Precast) |
| 34 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 35 | Anjani fala km 0/0 to 3/0 |
| 36 | Peeth Duka to Dhanmalia |
| 37 | ReinforcedcementconcreteM15 gradekilometrestone/localstoneof standarddesignasperIRC:8fixinginpositionincludingpaintingand printing, etc as per drawing and MoRTH Specification Clause 801.200 m stone (precast) |
| 38 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 39 | Anjani fala km 0/0 to 3/0 |
| 40 | Peeth Duka to Dhanmalia |
| 41 | ReinforcedcementconcreteM15gradeboundarypillars/localstoneof standarddesignasperIRC:25,fixedinpositionincludingfinishingand letteringbutexcludingpaintingasperdrawingandMoRTHSpecification Clause 807 |
| 42 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 43 | Anjani fala km 0/0 to 3/0 |
| 44 | Peeth Duka to Dhanmalia |
| 45 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminiumsheeting,1.5mmthicksupportedonamildsteel angleironpost75mmx75mmx6mmfirmlyfixedtothe groundbymeansofproperlydesignedfoundationwithM15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801.600 mm equilateral triangle |
| 46 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 47 | Anjani fala km 0/0 to 3/0 |
| 48 | Peeth Duka to Dhanmalia |
| 49 | Direction and Place Identification signs upto 0.9 sqm size board Retro-reflectorised Traffic Signs Providinganderectingdirectionandplaceidentificationretro- reflectorisedsignas perIRC:67madeofencapsulatedlens type reflective sheeting vide Clause 801.3.1, fixed over aluminiumsheeting, 2 mmthick with areanotexceeding 0.9 sqm supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M-15 gradecementconcrete450x450x600mm,600mmbelow ground level as per approved drawing and MoRTH Specification Clause 801,upto 0.9 sqm size board |
| 50 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 51 | Anjani fala km 0/0 to 3/0 |
| 52 | Peeth Duka to Dhanmalia |
| 53 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801900 mm side octagon |
| 54 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 55 | Anjani fala km 0/0 to 3/0 |
| 56 | Peeth Duka to Dhanmalia |
| 57 | MarkingCentreLineandstoplinesetc.onroadasperIRCpatternwith thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\" C with a special applicator machine completewithaspecialapplicatormachinecompletewithlabourmaterial and traffic diversion arrangements. |
| 58 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 59 | Anjani fala km 0/0 to 3/0 |
| 60 | Peeth Duka to Dhanmalia |
| 61 | Providing and Erecting typical Citizen\"s information Board as per approved drawing & specification made of two MS sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050mmwithangle holdfastsand horizontal member 900mm)to be joinedby embeddedincementconcreteM-15gradeofblockof600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by Engineering incharge. All MS will be stove anmeled on both side lettering.Figuringandborderwillbewithreadymixedsynthethicenamel paintofsuperiorqualityinrequiredshadeandcolouretccompleteinall respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. |
| 62 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 63 | Anjani fala km 0/0 to 3/0 |
| 64 | Peeth Duka to Dhanmalia |
| 65 | Supplying and Fixing of Cat’s Eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of ABS plastic on each side. |
| 66 | BATHADI TO BEDSA KM 0/0 TO 2/200 |
| 67 | Anjani fala km 0/0 to 3/0 |
| 68 | Peeth Duka to Dhanmalia |
