|
| 1 | Civil work |
| 2 | Earth work in excavation in all complete. S.I.No. 251 |
| 3 | P/L P.C.C. work in 1:6:12 all complete. Work S I No 273 |
| 4 | Class 150 brick work in 1:4 C.sand all complete. |
| 5 | 12mm thick Cement plaster in 1:3 all complete. |
| 6 | P/L C.C. work in 1:2:4 all complete. Work S I No 273 |
| 7 | Supply & Laying of G.S.B all complete work. |
| 8 | S/Lof Rubbermould interlocking work |
| 9 | M-20 Grade Ready mix Cement concrete with admixture all complete. |
| 10 | Additional for Non Mettalic C.C. Surface Hrdner, I/C all complete. |
| 11 | Scraping old white wash or colour wash. As S.I. No.708 |
| 12 | P/L of Birlla putty two coat all complete. |
| 13 | Painting Two Coat With Enamel Paint including OldDoor |
| 14 | Finishing wall with premium acrylic smooth Weather coat all compete. D.S.R. 13.47.1 |
| 15 | S/F of vetrified tiles all complete |
| 16 | Prime cost over WMM/WBMProviding and applying primer coat with SS-2 grade bitumen emulsion on prepared surface and sparying primer at the rate of 0.70kg/sqm using mechanical means |
| 17 | Tack Coat on Bituminous Surface providing and applying tack coat with bitumen VG-10using bitumen pressure distributor at of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom |
| 18 | Dence Graded Bituminus Macadam Grading Providing and lying dence graded bitumius macadam with higher capacity HMP using crused aggregates of specified grading premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler transporting the hot mix to work site laying with a hydrostatic paver finisher to the required grade level and alignment rolling with smooth wheeled vibratory and rollers to achieved the desired compaction as per MORTH specification clause No. 505 complete in all respects. |
| 19 | Bituminus Concrete Grading2Providing and laying bituminous concrete with higher lignmen hot mix plant using crushed aggregate of specied grading premixed with bituminous binder @5.4 percent of mix and filler transporting the hot mix to work site laying with hydrostatic paver finisher to the required grade level and lignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. |
| 20 | Road marking with Hot appliedthermoplastic compound with Reflectroising Glass Beds on Bituminous Surfece MoRTH-803(8.13) |
| 21 | Reflective Raised pavement markers (Cat Eye/Road stund)MoRTH-804(8.35) |
| 22 | E/W in cutting and filling I/C 5km cartage. |
| 23 | Disposal of suplush earth/malba cartage up to 5.0K.M. |
| 24 | Supply of mirzapuri stone 2’x5’x2’’ |
| 25 | Laying 80mmthickinterlocking bricks |
| 26 | View cutter /barricading ( wooden) 8’ HIGHT |
| 27 | S/F of 150mm dia pvc pipe |
| 28 | R.C.C work in 1:2:4 all complete S.I.No 284a |
| 29 | M.S. plain work all complete S.I.No 504 |
| 30 | Supply of Ganga sand etc. |
| 31 | Supply of River sand etc. |
| 32 | Hire charges of JCB etc. |
| 33 | Hire charges of Pockland etc |
| 34 | Hire charges of Tractor-Trolly etc. |
| 35 | Dismantling of Interlocking etc. |
| 36 | Dismantling of C.C. work etc. |
| 37 | Chitratmak Painting work |
| 38 | Plastic fiber reinforce concrete drain cover 600x750x100 |
| 39 | Plastic fiber reinforce concrete drain cover 750x750x100 |
| 40 | Rubbish |
| 41 | M.S. Fabrication of TublerSection/Trusses etc |
| 42 | Commercial Gas Cylinder |
| 43 | Skilled Labour For Operator Gas Cylinder Equipments |
| 44 | Steel Grill (304 Grade) |
| 45 | S/F of G.I. Sheet including all complete. |
| 46 | E/W cutting or in Embankment in ordinary soil all complete. |
| 47 | Brick edging both sides of roads |
| 48 | Laying of Mirzapuri stone |
| 49 | Supply & Fixing Aluminium door & Window |
| 50 | Supply & Fixing welded mesh |
| 51 | S/F Short boady bib coack |
| 52 | Wash Hand basin |
| 53 | 15mm G.I. pipe |
| 54 | 20mm G.I. pipe |
| 55 | Writing work |
| 56 | M.S. Iron work in Fabrication |
| 57 | 110mm PVC Pipe |
| 58 | 150mm PVC Pipe |
| 59 | Dismantaling of Plaster |
| 60 | S/F of 32mm thick Commercial Plywood door |
| 61 | S/F of 25mm PVC Pipe |
| 62 | S/F of PVC Tank |
| 63 | S/F of Squating type urinal seat |
| 64 | S/F of Cistern |
| 65 | White glazed ware orissa pan |
| 66 | Wash Basin |
| 67 | West Pipe |
| 68 | Wiring point of Light |
| 69 | S/F of point of Plug |
| 70 | Cleaning of Tank |
| 71 | Making of Bandha with Empty cement bag filled with sand/Earth |
| 72 | S/F of 900mm Hume pipe NP-3 |
| 73 | S/F of 600mm dia hume pipe NP-3 |
| 74 | Labour Charge |
| 75 | S/F of Fiber sheet |
| 76 | Supply of Green Net |
| 77 | Gril Repairing and Painting |
| 78 | Eearth Labeling Surface dressing of the ground,Trenching in ordinary soil up, Rough dressing the trenched ground including breaking clods, Fine dressing the grounding |
| 79 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 80 | Bonsui tree hight 6 ft to 10 Ft. |
| 81 | Dismantling of brick work |
| 82 | Dismantling of Reiforcement cement concrete |
| 83 | Supply of Fixing of Tirpal MR. |
| 84 | Cutting & Fitting of Tirpal MR. |
| 85 | Supply of Fish MR. |
| 86 | Supply of Boat MR. |
| 87 | Cutting of Jungal MR. |
| 88 | E/w Ecxavation pre pit |
| 89 | E/w cutting & Filling 2km cartage |
| 90 | M.S. engal small size |
| 91 | M.S. of Sign Borad M.R. |
| 92 | Supply of NP3 hume pipe 350mm dia all complete. |
| 93 | Supply & Installation of Decorative Ornamental pole with Singal arm bracket. Total Height of the pole with Singal arm Bracket shall be 7000mm nominal above the ground all complete. |
| 94 | Supply of High end LED Decorative heritage luminaire with features of four-sided street lamps decorative Look all complete. |
| 95 | Decoration of buses by Flowers and Ballon etc. |
| 96 | Oil based Room heater |
| 97 | Gas Gyser with pipe & Ragulater |
| 98 | Commercial gas Cylender |
| 99 | Brick work in supper structure |
| 100 | S/F of 6mm thick China Tiles |
| 101 | S/F of 200watt LED Light IP 66 |
| 102 | Tempropry Light Work with 200 watt LED including Labour etc. |
| 103 | Supply of signes board all complete |
| 104 | Supply of Umbrella (canopy) all complete |
| 105 | Supply of Umbrella (simple) all complete |
| 106 | Supply and Fixing Following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PWD SI. No.807 (f) (ii) 40 A TPN |
| 107 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76 mm inner Dia 38 mm terminal Dia 12 mm, outer GI pipe of 16 SWG and inner GI Pipe of 12 SWG with hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs. Activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. complete. PWD SINo. 725D |
| 108 | Provision of Road Cutting & Repairing |
| 109 | SITC of 3W Nebula bracket mounted with CCT 3000K, Maximum Voltage- 240 AVC, CRI >80, MacAdam step 3, CE and BIS Certified & Ip66 rating Make in India product with Material Characteristic of Die-Cast aluminum housing & Front ring (grade ADC12 with test certificate). Surface mounting. Silicone clear gasket. SS fasteners. Mechanical resistance IK06. With Pure polyester powder coated process & Acid treatment & pure polyester powder coating. For Better Lighting Performance Toughened Clear glass diffuser of 4mm thickness should be provided.This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >84%, power factor >0.95, THD <10%, Surge protection 2.5KV. The light to be mounted firmly on the bracket of the pole to illuminate the upper part of the bracket. |
| 110 | Wiring point for light with 1.5 sq.mm. FRLSH PVC Insulated mutistrand single core copper conductor cable in heavy guage wire earth continuty complete in all respect. PWD sch of 2018 SI. 121 (B) |
| 111 | Fastener 14 No. As Per Market Rate |
| 112 | Gulli. As Per Market Rate |
| 113 | Pench. As Per Market Rate |
| 114 | Saidil Pin 1\" As Per Market Rate |
| 115 | Same as in item 291 but with 2 nos. 4sq. Mm and 1 no 2.5sq.mm FRLSH PVC insulated copper conductor Cable PWD SI no 291 (A) |
| 116 | Flexibal Pipe 1\" As Per Market Rate |
| 117 | PVC Pipe 1\" As Per Market Rate |
| 118 | PVC Rolle Tape As Per Market Rate |
| 119 | Supply of Rope |
| 120 | Supply of LED Tube Light |
| 121 | Supply of Sutari |
| 122 | Supply of Steel wire |
| 123 | Supply of Copper Wire 40/76 |
| 124 | Supply of Polytheen |
| 125 | Supply of Role Tape |
| 126 | Sutli As per Market Rate |
| 127 | Dewatring of pump. |
| 128 | Making of bandha |
| 129 | Electrical Work |
| 130 | Supply and laying of 6 sq.mm. 2core aluminium conductor PVC insulated un armoured served sheathed cables 1100 Volts grade in pole for the Connection fitting as directed by the Engineer- In charge, Complete in all respect as-per PWD sch. Of 2018 Sl. No.501(A) |
| 131 | Supply and laying of 16 sp. mm 4 core aluminium conductor PVC Insulated armoured served sheathed cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75 mm. thick sandall around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-In charge. complete in all respected asper PWD sch. Or 2018 S.I. No. 501 (I) |
| 132 | Supply andlayingof 50 mm. dia heavy gauge (2 mm thick) PVC conduct complete with bend and other accessoriesasrequiredand14 SWG fish steel wireetc. In slab along with reinforcement before concreting, and plastering etc. Complete in all respected as-perPWD sch.Of 2018 S.l.No. 285 (A) |
| 133 | Supply and fixingofheavydutycadmiumplatedcopperconnector 4 corewith end platecomplete in allrespect as-per PWD sch. Of 2018 S.l. No.1128 (C)for4way connector. |
| 134 | Supply and fixingofheavydutycadmiumplatedcopperconnector 4 corewith end platecomplete in allrespect as-per PWD sch. Of 2018 S.l. No.1128 (C)for4way connector. |
| 135 | Supply and fixing of 3mm thick or Iron Plate with 4nos 12mm. holes and 1nos 75 mm. holes on plate for the fixing of J bolts 2nos plate for the 1 pole as-per Market rate. |
| 136 | Supply and fixingof 50mm dia PVC band for the connection of cable on pole 2nos band for the 1 pole Complete in all respectas-per PWD sch. Of Ayodhya |
| 137 | Pol Sifting Work. |
| 138 | Making suitable Earthing of pole with 2.5mm.M.S. rod with 7/16 SWG G.I. wire as per UPPClcomplete nall materials, labour and T&P required for proper completionof work. |
| 139 | Supply and fixing of 12.5 mtr. Highmast shaftof approved make with rising system hot dip galvanized inside & outside dip, heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, Bottom dia 310 mm base plate 25mm, thick suitable for wind velocity asper IS 875 part 3& having no circumferential weld, withaccessories for highmast such as head frame suitable for 6 luminaries &its control gearboxed 0.75 HPpower tool motor, 3 pointsuspension system with steel wire rope 6 mm dia doubledrum winch, including making suitable foundation as per manufacture drawing/siterequirement along with foundation bolts nuts, washesanchorplatesetc. complete in allrespect and Includig all accessories. PWD SINo.651, PWD SINo.725D, PWD SINo.501K, PWD SINo.1455, PWD SINo.807 (f) (ii) 40A TPN, PWD SINo.285 |
| 140 | Supply and fixing of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 120 Watt. Confirming to IP 66 Protection complete in all respect. PWD SI. No.1424 CAT-AAA |
| 141 | Supply &fixing of 6.0 mtr GI OctagonalPoleof approved make (top dia 70mm. Bottom dia 130mm and base plate12 mm thick) having mm thickness with Single arm bracket (1Mtr length) on 1:2:4 RCC foundationIncludingthe cost of Foundation, Foundation bolts, excavation & back filling and Required T&P completein all respect and Includig all accessories.Complete in all respect as-per PWD sch. Of 2018 SI. No. 647, PWD SI. No. 501 (a), PWD SI. No. 501 (l), PWD SI. No. 285 (a), PWD SI. No. 1128 (c),PWD SI. No. 1128 (a) |
| 142 | Supply of Clamp With Nut Bolt |
| 143 | Supply ofBracket |
| 144 | Supply of 10 mm Cable 2 CorePWD SI. No. 501 (b) |
| 145 | Supply of 40/76 Copper Wire |
| 146 | Supply ofWall Holder |
| 147 | Supply of LED Bulb 9 Watt |
| 148 | Supply of PVC PipePWD SI. No. 285(a) |
| 149 | Supply of 50 mm Cable 4 CorePWD SI. No. 501(l) |
| 150 | Supply of PVC Band |
| 151 | Supply of State Nut Bolt |
